• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.237-246
• /
• 2000

A broadband access network in B-ISDN subscriber network, plays a role of concentration or multiplexing of various subscribers into a service node. For call and connection control functions, DSS2 and B-ISUP signalling protocols are standardized for each of a subscriber side and a network node. B-BCC and B-ANCC protocol were proposed for VB5.2 interface. This interface allows dynamic control of ATM connections at the broadband access network. To establish an end-to-end ATM connection, interworking functions between VB5.2 interface's connection control protocol and the signalling protocol, are performed at the service node. A sequential interworking model and a parallel interworking model were proposed for these interworking functions. The sequential interworking model recommended by ITU-T causes an overall connection setup delay by introducing the access network, because this model proceeds the signalling protocol of network node after the response of VB5.2 interface protocol. On the other hand, the parallel interworking model proceeds the signalling protocol and the VB5.2 interface protocol simultaneously. The simultaneity of the parallel interworking model minimizes the overall connection setup delay. In this paper, we analyze and simulate above two interworking models with B-BCC or B-ANCC protocol in terms of a connection setup delay and completion ratio.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.521-529
• /
• 2020

Forest fires are one of the most important environmental risks that have adverse effects on many aspects of life, such as the economy, environment, and health. The early detection, quick prediction, and rapid response of forest fires can play an essential role in saving property and life from forest fire risks. For the rapid discovery of forest fires, there is a method using meteorological data obtained from local sensors installed in each area by the Meteorological Agency. Meteorological conditions (e.g., temperature, wind) influence forest fires. This study evaluated a Data Mining (DM) approach to predict the burned area of forest fires. Five DM models, e.g., Stochastic Gradient Descent (SGD), Support Vector Machines (SVM), Decision Tree (DT), Random Forests (RF), and Deep Neural Network (DNN), and four feature selection setups (using spatial, temporal, and weather attributes), were tested on recent real-world data collected from Gyeonggi-do area over the last five years. As a result of the experiment, a DNN model using only meteorological data showed the best performance. The proposed model was more effective in predicting the burned area of small forest fires, which are more frequent. This knowledge derived from the proposed prediction model is particularly useful for improving firefighting resource management.

• The Journal of Small Business Innovation
• /
• v.20 no.3
• /
• pp.31-48
• /
• 2017

Teams play an indispensable role in helping an organization achieve its goal. Since constant interaction among team members is the cornerstone of team competitiveness, it is necessary for the team members to commit themselves to shared goals-team commitment, a type of positive, emotional attitude of team members. Constant interactions among team members, however, inevitably breed a byproduct called conflict. Though intra-team conflict has both positive and negative effects on team performance, little research has been done to clarify the roles that relationship, task and process conflicts play in team commitment. This research is an empirical investigation of the relationship among the three types of conflicts - relationship, task and process conflicts - based on data collected from 232 R&D teams of 13 Korean companies. The analysis suggests that, while relationship conflict has a negative impact on team commitment, task and process conflicts have no significant impact on team commitment. As for the relationships among those three types of conflict, process conflict has positively influenced task, and relationship conflicts and task conflict also has had a positive impact on relationship conflict. Based on these results, this study has presented its implications and directions for future research.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.17
• /
• pp.7119-7123
• /
• 2014

Background: The role of second-line therapy in metastatic pancreatic cancer is not clear. In this study, we aimed to explore the second-line efficiency of capecitabine and oxaliplatin (XELOX) in patients with advanced pancreatic cancer who have received gemcitabine-based first-line therapy. Materials and Methods: We retrospectively evaluated 47 patients with locally advanced or metastatic pancreatic cancer previously treated with gemcitabine-based first-line regimens. Treatment consisted of oxaliplatin $130mg/m^2$ and capecitabine $1000mg/m^2$ twice daily with a 3 week interval, until unacceptable toxicity or disease progression. Results: Median number of cycles was 4 (range, 2-10). The overall disease control rate was 38.3%. The median overall survival and progression-free survival from the start of second-line therapy were 23 weeks (95%CI: 16.6-29.5 weeks) and 12 weeks (95%CI: 9.8-14.4 weeks), respectively. The most common grade 3-4 toxicities were nausea, vomiting and hematologic side effects. Conclusions: Our result suggests that the combination of capecitabine and oxaliplatin was tolerated with manageable toxicity and showed encouraging activity as second-line treatment of advanced or metastatic pancreatic cancer patients with ECOG performance status 0-2.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.659-666
• /
• 2006

Servo-motors are used as key components of automated system by performing precise motion control as accurate positioning and accurate speed regulation in response to the commands from computers and sensors. Especially, the linear brushless servo-motors have numerous advantages over the rotary servo motors which have connection with the friction induced transfer mechanism such as ball screws, timing belts, rack/pinion. This paper proposes an estimation method of unknown motor system parameters using the informations from the sinusoidal driving type linear brushless DC motor dynamics and outputs. The estimated parameters can be used to tune the controller gain and a disturbance observer. In order to meet this purpose high performance Digital Signal Processor, TMS320F240, designed originally for implementation of a Field Oriented Control(FOC) technology is adopted as a controller of the liner BLDC servo motor. Having A/D converters, PWM generators, rich I/O port internally, this servo motor application specific DSP play an important role in servo motor controller. This linear BLDC servo motor system also contains IPM(Intelligent Power Module) driver and hail sensor type current sensor module, photocoupler module for isolation of gate signals and fault signals.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.9
• /
• pp.1083-1095
• /
• 1999

최근 처리기와 입출력 시스템의 속도 차이가 점점 커짐에 따라 버퍼 캐쉬의 효율적인 관리가 더욱 중요해지고 있다. 버퍼 캐쉬는 블록 교체 정책과 선반입 정책에 의해 관리되며, 각 정책은 버퍼 캐쉬에서 블록의 가치 즉 어떤 블록이 더 가까운 미래에 참조될 것인가를 결정해야 한다. 블록의 가치는 응용들의 블록 참조 패턴의 특성에 기반하며, 블록 참조 패턴의 특성에 대한 정확한 분석은 올바른 결정을 가능하게 하여 버퍼 캐쉬의 효율을 높일 수 있다. 본 논문은 각 응용들의 블록 참조 패턴에 대한 특성을 분석하고 이를 자동으로 발견하는 기법을 제안한다. 제안된 기법은 블록의 속성과 미래 참조 거리간의 관계를 이용해 블록 참조 패턴을 발견한다. 이 기법은 2 단계 파이프라인 방법을 이용하여 온라인으로 참조 패턴을 발견할 수 있으며, 참조 패턴의 변화가 발생하면 이를 인식할 수 있다. 본 논문에서는 8개의 실제 응용 트레이스를 이용해 블록 참조 패턴의 발견을 실험하였으며, 제안된 기법이 각 응용의 블록 참조 패턴을 정확히 발견함을 확인하였다. 그리고 발견된 참조 패턴 정보를 블록 교체 정책에 적용해 보았으며, 실험 결과 기존의 대표적인 블록 교체 정책인 LRU에 비해 최대 57%까지 디스크 입출력 횟수를 줄일 수 있었다.Abstract As the speed gap between processors and disks continues to increase, the role of the buffer cache located in main memory is becoming increasingly important. The buffer cache is managed by block replacement policies and prefetching policies and each policy should decide the value of block, that is which block will be accessed in the near future. The value of block is based on the characteristics of block reference patterns of applications, hence accurate characterization of block reference patterns may improve the performance of the buffer cache. In this paper, we study the characteristics of block reference behavior of applications and propose a scheme that automatically detects the block reference patterns. The detection is made by associating block attributes of a block with the forward distance of the block. With the periodic detection using a two-stage pipeline technique, the scheme can make on-line detection of block reference patterns and monitor the changes of block reference patterns. We measured the detection capability of the proposed scheme using 8 real workload traces and found that the scheme accurately detects the block reference patterns of applications. Also, we apply the detected block reference patterns into the block replacement policy and show that replacement policies appropriate for the detected block reference patterns decreases the number of DISK I/Os by up to 57%, compared with the traditional LRU policy.

• Membrane Journal
• /
• v.18 no.3
• /
• pp.198-205
• /
• 2008

A novel technology for homogeneous deposition of zeolite particles on a porous support was developed so that those particles played a seeding role for the growth of zeolite crystals. After the particles were dispersed in water, the aqueous solution was 134 through the bore of a porous tubular support. By keeping the other side of the support in a vacuum, the aqueous solution passed through the pores of the support, leading the particles to be homogeneously deposited on the support. The amount of the deposited particles was investigated by changing the following operating parameters: a particle concentration in the solution, a time for deposition, and the feeding rate of the solution. The amount of the deposited particles increased from 0.0019 g to 0.0208 g as the concentration of the particles was changed from 0.01 wt% to 0.3 wt%, while the feeding rate and the deposition time were kept to 100 mL/min and 4 min, respectively. As the deposition time was varied from 1 min to 4 min, the deposition amount increased from 0.0004g to 0.0019g at the typical condition of the rest parameters. Also, it was observed that the deposited weight increased from 0.0029 g to 0.01 g as the feeding rate increased from 100 mL/min to 300 mL/min. However, the total permeance of water and ethanol decreased through the zeolite membrane as the deposited weight increased.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.802-812
• /
• 2016

Silicone foam is very useful as flame resistant material for many industrial areas such as high performance gasketing, thermal shielding, vibration mounts, and press pads. A silicone foam was prepared through simultaneous crosslinking and foaming by hydrogen condensation reaction of a vinyl-containing polysiloxane (V-silicone) and a hydroxyl-containing polysiloxane (OH-silicone) with hydride containing polysiloxane (H-silicone) in the presence of platinum catalyst and imorganic filler at room temperature. This is more convenient process for silicone foam manufacturing than the conventional separated crosslinking and foaming systems. Funtionalized silicones we used in this experiment were consisted with a V-silicone containing 1,0 meq/g of vinyl groups and a viscosity of 20 Pa-s, an OH-silicone with 0.4 meq/g of hydroxyl groups and a viscosity from 50 Pa-s, and an H-silicone containing 7.5 meq/g of hydride groups and a viscosity of 0.06 Pa.s. The effects of compositions of functionalized silicones and additives, such as catalyst and filler on the structure and mechanical properties of silicone foam were studied. 0.5 wt% of Pt catalyst was enough to accelerate the foaming rate of silicone resins. The addition of OH-silicone with lower viscosity accelerates the initial foaming rate and decreases the foam density, but the addition of V-silicone with lower viscosity reduces the tensile strength as well as the elongation. The final foam density, tensile strength, and elogation of silicone foam prepared under the SF-3 condition increase maximum to $0.58g/cm^3$, $3,51kg_f/cm^2$, and 176 %, repectively. We found out the filler alumina also played an important role to improve the mechanical properties of silicone foams in our foaming system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.3
• /
• pp.196-208
• /
• 2007

An analytical model is proposed for an optically controlled Metal Semiconductor Field Effect Transistor (MESFET), known as Optical Field Effect Transistor (OPFET) considering the diffusion fabrication process. The electrical parameters such as threshold voltage, drain-source current, gate capacitances and switching response have been determined for the dark and various illuminated conditions. The Photovoltaic effect due to photogenerated carriers under illumination is shown to modulate the channel cross-section, which in turn significantly changes the threshold voltage, drainsource current, the gate capacitances and the device switching speed. The threshold voltage $V_T$ is reduced under optical illumination condition, which leads the device to change the device property from enhancement mode to depletion mode depending on photon impurity flux density. The resulting I-V characteristics show that the drain-source current IDS for different gate-source voltage $V_{gs}$ is significantly increased with optical illumination for photon flux densities of ${\Phi}=10^{15}\;and\;10^{17}/cm^2s$ compared to the dark condition. Further more, the drain-source current as a function of drain-source voltage $V_{DS}$ is evaluated to find the I-V characteristics for various pinch-off voltages $V_P$ for optimization of impurity flux density $Q_{Diff}$ by diffusion process. The resulting I-V characteristics also show that the diffusion process introduces less process-induced damage compared to ion implantation, which suffers from current reduction due to a large number of defects introduced by the ion implantation process. Further the results show significant increase in gate-source capacitance $C_{gs}$ and gate-drain capacitance $C_{gd}$ for optical illuminations, where the photo-induced voltage has a significant role on gate capacitances. The switching time ${\tau}$ of the OPFET device is computed for dark and illumination conditions. The switching time ${\tau}$ is greatly reduced by optical illumination and is also a function of device active layer thickness and corresponding impurity flux density $Q_{Diff}$. Thus it is shown that the diffusion process shows great potential for improvement of optoelectronic devices in quantum efficiency and other performance areas.

• The KIPS Transactions:PartB
• /
• v.16B no.2
• /
• pp.123-130
• /
• 2009

Motion estimation (ME) plays an important role in digital video compression. But it limits the performance of image quality and encoding speed and is computational demanding part of the encoder. To reduce computational time and maintain the image quality, integer pel and fractional pel ME methods are proposed in this paper. The proposed method for integer pel ME uses a hierarchical search strategy. This strategy method consists of symmetrical cross-X pattern, multi square grid pattern, diamond patterns. These search patterns places search points symmetrically and evenly that can cover the overall search area not to fall into the local minimum and to reduce the computational time. The proposed method for fractional pel uses full search pattern, center biased fractional pel search pattern and the proposed search pattern. According to block sizes, the proposed method for fractional pel decides the search pattern adaptively. Experiment results show that the speedup improvement of the proposed method over Unsymmetrical cross Multi Hexagon grid Search (UMHexagonS) and Full Search (FS) can be up to around $1.2{\sim}5.2$ times faster. Compared to image quality of FS, the proposed method shows an average PSNR drop of 0.01 dB while showing an average PSNR gain of 0.02 dB in comparison to that of UMHexagonS.