• 한국세라믹학회지
• /
• 제34권2호
• /
• pp.131-138
• /
• 1997

희석기체로써 Ar 및 H2를 사용하여 MTS(CH3SiCl3)를 원료물질로 한 탄화규소막을 흑연 기판 위에 화학증착시켰다. 본 연구는 증착온도 130$0^{\circ}C$, 총압력은 10 torr 및 MTS와 원료 운반기체의 총유량은 100 sccm으로 일정하게한 상태에서, 각 희석기체의 첨가에 따른 성장거동의 변화를 고찰하고자 하였다. 증착속도는 희석기체와 상관없이 첨가량이 200sccm일 때 최대값을 갖는 모양을 보였으나, Ar을 첨가할 때가 H2에 비해 더 빠른 증착속도를 나타냈다. 이러한 증착속도 특성은 전체 증착속도가 물질전달 율속단계에 있을 때, 각 희석기체의 첨가에 따라 변화되는 경막 두께(boundary layer thickness) 및 원료물질 농도의 상관관계에 기인한다고 여겨졌다. 우선배향성은 Ar의 경우 모든 첨가량의 범위에서 (220)면으로 우선배향되었으나, H2의 경우에는 200sccm이상에서 첨가량에 비례하여 (111)면으로 우선배향되는 경향을 보였다. 표면미세구조는 Ar을 첨가한 경우에 일정하게 facet구조를 유지하였으나, H2의 경우에는 facet에서 평탄한(smooth)구조로 변화되었다. 표면조도의 경우 첨가량이 늘어남에 따라 지속적으로 Ar에서는 증가하였지만, H2에서는 감소하였다.

• 대한치과교정학회지
• /
• 제15권1호
• /
• pp.123-140
• /
• 1985

Variation in the facial pattern and effect of the rotational jaw growth on the facial proportion were studied in serial cephalometric radiographs of 40 Korean children (25 boys, 15 girls) ranging in age from 6 to 13 years. According to Y-axis (N-S-Gn) growth change during the 7 years of period, the subject who had exhibited 'wave-like' manner of Y-axis growth change within ${\pm}\;2^{\circ}$ was classified to the Parallelwise group and the subject who had exhibited Y-axis increase more than $+2^{\circ}$ was classified to the Clockwise rotation group and the subject who had exhibited Y-axis decrease more than $-2^{\circ}$ was classified to the Counterclockwise rotation group. For the comparison of each group, a total of 22 morphologic variables were employed and the data were analyzed by means of computer morphometrics and statistical methods. On the basis of the finding of this study, the following trends were established. 1. The Parallelwise group was $75\%$, the Clockwise rotation group was $12.5\%$ and the Counter-clockwise rotation group was $12.5\%$. 2. The growth pattern of cranial base was related to the rotation of mandible. 9. Maxillary prognathism was occured in the Counterclockwise rotation group and the rotation of palatal plane was occured in the Clockwise rotation group. 4. Mandibular prognathism was occured in the Parallelwise and the Counterclockwise rotation groups, especially in the Counterclockwise rotation group. 5. The degree of maxillo-mandibular divergency was constant in the Clockwise rotation group but decreased in the Counterclockwise rotation and the Parallelwise groups, especially in the Counterclockwise group. 6. There were no differences in the size of the anterior upper facial height (N-ANS) and the posterior lower facial height ((Go-Me)-PNS) but there were differences in the size of the anterior lower facial height (ANS-Me) and the posterior upper facial height ((S-N)-PNS) between each group. 7. The growth increment and the size of the facial depth was not related to the growth pattern of the face but the growth increment and the size of the facial height was related to the growth pattern of the face. 8. Proportional change due to the facial growth rotation was concentrated in the anterior lower face. 9. The most apparent difference between each group was happened in the size of the posterior cranial base (S-Ba) and the facial length (S-Gn).

• Journal of Periodontal and Implant Science
• /
• 제36권1호
• /
• pp.147-154
• /
• 2006

Surgical intervention in the posterior maxillary region requires detailed knowledge of maxillary sinus anatomy and the possible anatomical variations. This study evaluated the incidence, location of maxillary sinus septa by using radiographic (panoramic radiography and computed tomography) findings and comparison of panoramic radography with CT in antral anatomical variation. This study was based on data from 70 sinuses in partial dentate maxilla. The sample consisted of 61 patients(25 women and 36 men, with ages ranging between 19 and 77 years and a mean age of $49.4{\pm}11.3$ years) who were being treatment-planned to receive implant-supported restorations. First, the panoramic images were examined for the presence of antral septa by radiologist and examiner who don't know about CT findings. And incidence of antral septa was evaluated using an axial plane of CT image. The incidence of septa was compared between panoramic radiography and CT. The accuracy of the incidence was compared between radiologists and dentists. A total of 20 septa were found in 70 sinuses on CT image and the prevalence of one or more septa per sinus was found to be 28.6%. The assumed incidence of septa on panoramic radiography was $27.6%{\pm}2.2%$ in radiologist and $31.9%{\pm}5.8%$ in dentists. Erroneous diagnosis rate was 11.42% in radiologist and 15.96% in dentists. 40% of antral septa were located in the anterior(premolar) region, 30% of septa were located in the middle(first molar) and posterior(second molar) region separately. Prior to implant placement, it seems appropriate to consider panoramic radiography as a standard radiographic examination and periapical radiographs may be used to complete the findings in regions not sharply depicted in the panoramic radiograph. And cross-sectional imaging should be used in sites with severe bone loss and close proximity of the maxillary sinus.

• 한국해안해양공학회지
• /
• 제8권2호
• /
• pp.123-136
• /
• 1996

본 연구에서는 시 공간적으로 변화하는 밀도구조를 고려한 3차원 연직함수 전개모형을 제안한다. 정수압을 가정하며 열보존식과 상태방정식의 도입으로 밀도변화가 고려된다 수평방향으로의 변화는 유한 차분 격자상에서 계산되며 유속 및 수온의 연직구조는 선형보간함수를 사용하여 계산된다. 구성된 행렬방정식은 유사변환 개념을 도입하여 시간적분된다. 개발된 모델의 테스트를 위해 간단한 이상해역과 황해역에서 대기와 해양간의 열교환에 따른 수온구조 변동을 실험하였다. 이류효과는 열수송방정식에서만 고려하였으며 연직 와동점성계수와 와동확산계수는 시 공간적으로 일정한 값을 사용하였다. 이상해역에서의 수치실험결과 모델영역의 수심의 차이에 따른 열저장의 차이로 인해 수온의 수평적 구배가 발생하였다. 결과적으로 전향력을 고려하지 않을 경우에는 상층에서는 수심이 증가하는 방향으로 흐름이 발생하고 하층에는 반대방향의 흐름이 유도된 반면 전향력을 고려할 경우에는 수온차에 의한 압력구배력과 전향력이 균형을 이루면서 지형류가 뚜렷하게 나타났다. 황해역에서는 복잡한 흐름이 나타났지만 전체적으로는 지형류의 특성이 우세하게 나타났다.

• 플랜트 저널
• /
• 제4권3호
• /
• pp.60-65
• /
• 2008

Power plant industry has been developed at high-capacity, high-technology, and innovation. Steam turbine became the most useful equipment that dominate more than 50% of all the world electricity production. And developed new materials of the turbine blade and extended length of the turbine last blade brought reform in steam turbine performance upgrade. In this paper, when do partial load driving in high-capacity steam turbine, optimum driving method found whether there is something. In operating steam turbine, there is a lot of loss from secondary wake and throttle of the 1st stage nozzle by the biggest leading factor that load fluctuation affects in high-pressure steam turbine performance. Effect of internal efficiency by 1 stage nozzle is the biggest here, but here fluid flow and flow analysis were not yet examined closely definitely. So, Analyzed design data and acceptance performance test result to applying subcritical pressure drum type 560 MW, supercritical-pressure once through type 500 MW, and 800 MW steam turbines actually. In conclusion, at partial load driving, partial arc admission(PAA) is more efficient than full arc admission(FAA) efficiency. This is judged by because increase being proportional with gross energy of stream that is pressure - available energy if pressure of stream that is flowed in to the turbine increases, available energy becomes maximum and turbine efficiency improves. Therefore, turbine performance is that preview that first stage performance fell if decline is serious in partial load because first stage performance changes according to load.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.70.1-70.1
• /
• 2012

In-situ X-ray photoelectron spectroscopy (XPS) and infrared (IR) spectroscopy studies of SOFC cathode materials will be discussed in this presentation. The mixed conducting perovskites (ABO3) containing rare and alkaline earth metals on the A-site and a transition metal on the B-site are commonly used as cathodes for solid oxide fuel cells (SOFC). However, the details of the oxygen reduction reaction are still not clearly understood. The information about the type of adsorbed oxygen species and their concentration is important for a mechanistic understanding of the oxygen incorporation into these cathode materials. XPS has been widely used for the analysis of adsorbed species and surface structure. However, the conventional XPS experiments have the severe drawback to operate at room temperature and with the sample under ultrahigh vacuum (UHV) conditions, which is far from the relevant conditions of SOFC operation. The disadvantages of conventional XPS can be overcome to a large extent with a "high pressure" XPS setup installed at the BESSY II synchrotron. It allows sample depth profiling over 2 nm without sputtering by variation of the excitation energy, and most importantly measurements under a residual gas pressure in the mbar range. It is also well known that the catalytic activity for the oxygen reduction is very sensitive to their electrical conductivity and oxygen nonstoichiometry. Although the electrical conductivity of perovskite oxides has been intensively studied as a function of temperature or oxygen partial pressure (Po2), in-situ measurements of the conductivity of these materials in contact with the electrolyte as a SOFC configuration have little been reported. In order to measure the in-plane conductivity of an electrode film on the electrolyte, a substrate with high resistance is required for excluding the leakage current of the substrate. It is also hardly possible to measure the conductivity of cracked thin film by electrical methods. In this study, we report the electrical conductivity of perovskite $La_{0.6}Sr_{0.4}CoO_{3-{\delta}}$ (LSC) thin films on yttria-stabilized zirconia (YSZ) electrolyte quantitatively obtained by in-situ IR spectroscopy. This method enables a reliable measurement of the electronic conductivity of the electrodes as part of the SOFC configuration regardless of leakage current to the substrate and cracks in the film.

• 한국유체기계학회 논문집
• /
• 제15권5호
• /
• pp.60-66
• /
• 2012

One of commonly physical phenomena encountered in pump sump systems in which its significant influence to the hydraulic performance of pump system plays an important role in the field of fluid engineering, is the appearance of free surface and submerged vortices. In this paper, a study of the vortices behavior and their formative mechanism of asymmetry is considered in this paper by using numerical approach. The Reynolds-Averaged Navier-Stokes (RANS) equations and k-omega Shear Stress Transport turbulence model used to describe the properties of turbulent flows, in company with VOF multiphase model, are implemented by Fluent code with multi-block structured grid system. In the numerical simulation, the calculated elevation of air-water interface and vortex core contours are used to classify visually surface vortices as well as submerged vortices. It is shown that the free surface vortex is identified by the concavity of liquid region from the free surface and swirling flow at that own plane. To investigate the distinctive behavior of these vortices corresponding to each given flow rate at the same water level, some numerical testing of them are considered here in such a manner that the flow pattern of surface vortex are obtained similarly to the obtained results from experiment. Furthermore, the influence due to the change of grid refinement and the variation of depth of the concavity are also considered in this paper. From that, these influential factors will be implemented to design a good pump sump with higher performance in the future.

• Tribology and Lubricants
• /
• 제35권4호
• /
• pp.229-236
• /
• 2019

This study investigates the stress singularity that occurs at the contact edge of three bodies in a frictional complete contact. We use the asymptotic analysis method, wherein we constitute an eigenvalue problem and observe the eigenvalue behavior, which we use to obtain the order of the stress singularity. For the present geometry of three bodies in contact, a contact between a cracked indenter and half plane is considered. This is a typical geometry of the PCMI problem of a nuclear fuel rod. Thus, this paper, specifically presents the characteristics of the PCMI problem from the perspective of stress singularity. Consequently, it is noted that the behavior of the stress singularity varies with the difference in the crack angle, coefficient of friction, and material dissimilarity, as is observed in a frictional complete contact of two bodies. In addition, we find that the stress singularity changes essentially linearly with respect to the coefficient of friction, regardless of the variation in the crack angle and material dissimilarity. Concurrently, we find the order of singularity to be 0.5 at a certain coefficient of friction, irrespective of the crack angle, which we also observe in the crack problem of a homogeneous and isotropic body. The order of singularity can also exceed 0.5 in the frictional complete contact problem of three bodies. This implies that the propensity for failure when three bodies are in frictional complete contact can be even worse than that in case of a failure induced by a crack.

• 전자공학회논문지CI
• /
• 제42권3호
• /
• pp.39-52
• /
• 2005

본 논문에서는 실내환경의 3차원 복원을 위해 다시점 카메라부터 획득된 부분적인 3차원 점군에 대한 정합 기법을 제안한다. 일반적으로, 기존의 정합 방법들은 많은 계산량을 요하며, 정합하는데 많은 시간이 소요된다 또한, 상대적으로 정밀도가 낮은 3차원 점군에 대해서는 정합이 어렵다. 이러한 문제점을 해결하기 위해 투영 기반 정합 방법을 제안한다. 첫 번째, 시간적 특성을 기반으로 변화량이 큰 3차원 점들을 제거하고, 공간적 특성을 이용하여 현재 화소의 주변 3차원 점을 참조하여 빈 영역을 채움으로써 깊이 영상 정제 과정을 수행한다. 두 번째, 연속된 두 장면에서의 3차원 점군을 동일한 영상 평면으로 투영하고, 두 단계 정수 매핑을 적용한 후 수정된 KLT (Kanade-Lucas-Tomasi) 특징 추적기를 사용해 대응점을 찾는다. 그리고 적응적 탐색 영역에 기반하여 거리 오차를 최소화함으로써 정밀한 정합을 수행한다. 마지막으로, 대응되는 점들에 대한 색을 참조하여 최종적인 색을 계산하고, 위의 과정을 연속된 장면에 적용함으로써 실내환경을 복원한다. 제안된 방법은 대응점을 2차원 영상 평면에서 찾음으로써 계산의 복잡도를 줄이며, 3차원 데이터의 정밀도가 낮은 경우에도 정합이 효과적이다. 또한, 다시점 카메라를 이용함으로써 몇 장면에 대한 색과 깊이 영상만으로도 실내환경의 3차원 복원이 가능하다.

• 한국해안·해양공학회논문집
• /
• 제21권2호
• /
• pp.154-163
• /
• 2009

해안에서 입사파향은 일반적으로 실측 파랑자료로부터 생성한 파향 스펙트럼 분석을 통하여 구하지만, 파향의 실측기법은 현장 계기설치시 많은 인력과 비용이 소요되기 때문에 전 쇄파지역에 걸쳐 입사파향을 관측하기에는 어려움이 따른다. 이러한 이유로, 본 연구는 해안 디지털 비디오 자료에 나타나는 입사파의 파봉선을 이용하여 쇄파지역에서 입사파의 변화를 관측하는 기술을 제안한다. 파봉선은 이미지 상에서 선인식 기법을 이용하여 이미지 강도가 큰 픽셀들을 추적해 나감으로써 추출한다. 입사파향은 추출된 파봉선의 일차미분값, 즉, 실제 평면좌표 공간에서 파봉선의 기울기를 계산하여 구한다. 비디오 자료로부터 입사파향의 측정결과는 실측 파랑자료의 파향 스펙트럼으로부터 구한 파향 계산결과와 비교적 잘 일치한다.