• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.910-918
• /
• 2004

The vibration analysis of an axially moving membrane are investigated when the membrane has the two sets of in-plane boundary conditions, which are free and fixed constraints in the lateral direction. Since the in-plane stiffness is much higher than the out-of-plane stiffness, it is assumed during deriving the equations of motion that the in-plane motion is in a steady state. Under this assumption, the equation of out-of-plane motion is derived, which is a linear partial differential equation influenced by the in-plane stress distributions. After discretizing the equation by using the Galerkin method, the natural frequencies and mode shapes are computed. In particular, we put a focus on analyzing the effects of the in-plane boundary conditions on the natural frequencies and mode shapes of the moving membrane.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.553-571
• /
• 2019

Geometric variation including welding distortion accumulates as many parts are joined together, ultimately affecting the final product. This variation is then subjected to correction, which requires considerable effort, time, and cost. This variation can be categorized as in-plane/out-of-plane variation. To date, studies on variation simulation have largely focused on the out-of-plane variation, however the variation generated in the in-plane direction requires more time and efforts to correct afterwards. This research aims to construct a variation simulation model considering both the in-plane and out-of-plane variations. A geometric analysis was performed to derive an equation that reflects the coupling effect of the out-of-plane variation on the in-plane variation. The proposed model is validated with case study analysis and the results shows that good fidelity in predicting and diagnosing the in-plane variation during the block assembly process considering welding distortion.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.121-129
• /
• 1998

In-plane ESPI(Electronic Speckle Pattern Interferometry) was devised to measure in-plane deformations and rotation of a specimen with laser in this study. ESPI is a optical measuring method to be able to measure the deformations of engineering components and materials in industrial fields. The conventional measuring methods of surface deformations such as the strain gauge have many demerits because they are contact and point-to-point measuring ones. But that ESPI is noncontact, nondestructive and whole field measuring method can overcome previous disadvantages. We used ESPI which is sensitive to in-plane displacement for measuring in-plane deformations of a disk. And the 4-frame phase shifting method was used for the quantitative analysis. First of all, the system calibration was done due to an in-plane rotation before getting deformations of a disk. Finally we showed good agreement between the experiment results and those of the FEA(Finite Element Analysis).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.164-168
• /
• 2004

The vibration analysis of an axially moving membrane are investigated when the membrane has the two sets of in-plane boundary conditions, which are free and fixed constraints in the lateral direction. Since the in-plane stiffness is much higher than the out-of-plane stiffness, it is assumed during deriving the equations of motion that the in-plane motion is in a steady state. Under this assumption. the equation of out-of\ulcornerplane motion is derived, which is a linear partial differential equation influenced by the in-plane stress distributions. After discretizing the equation by using the Galerkin method, the natural frequencies and mode shapes are computed. In particular, we put a focus on analyzing the effects of the in-plane boundary conditions on the natural frequencies and mode shapes of the moving membrane.

• The Journal of Advanced Prosthodontics
• /
• 제5권1호
• /
• pp.58-66
• /
• 2013

PURPOSE. The purpose of this study was to decide the most appropriate point on tragus to be used as a reference point at time of marking ala tragus line while establishing occlusal plane. MATERIALS AND METHODS. The data was collected in two groups of subjects: 1) Dentulous 2) Edentulous group having sample size of 30 for each group with equal gender distribution (15 males, 15 females each). Downs analysis was used for base value. Lateral cephalographs were taken for all selected subjects. Three points were marked on tragus as Superior (S), Middle (M), and Inferior (I) and were joined with ala (A) of the nose to form ala-tragus lines. The angle formed by each line (SA plane, MA plane, IA plane) with Frankfort Horizontal (FH) plane was measured by using custom made device and modified protractor in all dentulous and edentulous subjects. Also, in dentulous subjects angle between Frankfort Horizontal plane and natural occlusal plane was measured. The measurements obtained were subjected to the following statistical tests; descriptive analysis, Student's unpaired t-test and Pearson's correlation coefficient. RESULTS. The results demonstrated, the mean angle COO (cant of occlusal plane) as $9.76^{\circ}$, inferior point on tragus had given the mean angular value of IFH [Angle between IA plane (plane formed by joining inferior point-I on tragus and ala of nose- A) and FH plane) as $10.40^{\circ}$ and $10.56^{\circ}$ in dentulous and edentulous subjects respectively which was the closest value to the angle COO and was comparable with the values of angle COO value in Downs analysis. Angulations of ala-tragus line marked from inferior point with occlusal plane in dentulous subject had given the smallest value $2.46^{\circ}$ which showed that this ala-tragus line was nearly parallel to occlusal plane. CONCLUSION. The inferior point marked on tragus is the most appropriate point for marking ala-tragus line.

• Structural Engineering and Mechanics
• /
• 제59권3호
• /
• pp.503-526
• /
• 2016

In-plane and out-of-plane free vibration analysis of Timoshenko curved beams is addressed based on the isogeometric method, and an effective scheme to avoid numerical locking in both of the two patterns is proposed in this paper. The isogeometric computational model takes into account the effects of shear deformation, rotary inertia and axis extensibility of curved beams, and is applicable for uniform circular beams, and more complicated variable curvature and cross-section beams as illustrated by numerical examples. Meanwhile, it is shown that, the $C^{p-1}$-continuous NURBS elements remarkably have higher accuracy than the finite elements with the same number of degrees of freedom. Nevertheless, for in-plane or out-of-plane vibration analysis of Timoshenko curved beams, the NURBS-based isogeometric method also exhibits locking effect to some extent. To eliminate numerical locking, the selective reduced one-point integration and $\bar{B}$ projection element based on stiffness ratio is devised to achieve locking free analysis for in-plane and out-of-plane models, respectively. The suggested integral schemes for moderately slender models obtain accurate results in both dominated and non-dominated regions of locking effect. Moreover, this strategy is effective for beam structures with different slenderness. Finally, the influence factors of structural parameters of curved beams on their natural frequency are scrutinized.

• The Korean Journal of Pain
• /
• 제34권4호
• /
• pp.487-500
• /
• 2021

Background: Although the erector spinae plane block has been used in various truncal surgical procedures, its clinical benefits in patients undergoing spinal surgery remain controversial. The aim of this meta-analysis was to evaluate the clinical benefits of erector spinae plane block in patients undergoing spinal surgery. Methods: We searched the Cochrane Library, PubMed, EMBASE, and China National Knowledge Infrastructure for randomized controlled trials comparing the erector spinae plane block with a nonblocked control for spinal surgery. Results: Twelve studies encompassing 696 subjects were included in our systematic review and meta-analysis. We found that the erector spinae plane block decreased postoperative pain scores and opioid consumption in the postoperative and intraoperative periods. Moreover, it prolonged the time to the first rescue analgesic, reduced the number of patients who required rescue analgesia, and lowered the incidence of postoperative nausea and vomiting. However, it did not exhibit efficacy in decreasing the incidence of urinary retention and itching or shortening the length of hospital stays, or the time to first ambulation. Conclusions: Erector spinae plane block improves analgesic efficacy among patients undergoing spinal surgery compared with nonblocked controls; however, there is insufficient evidence regarding the benefits of erector spinae plane block for rapid recovery.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.160-167
• /
• 2004

A two degree-of-freedom mathematical model is presented to investigate the friction mechanism of a disc brake system. A contact parameter is introduced to describe the coupling between the in-plane and the out-of-plane motions. The model with the contact parameter is considered under the assumption that the out-of-plane motion depends on the friction force along the in-plane motion. In order to describe the relationship between the friction force and the out-of plane motion, the dynamic friction coefficient is considered as a function of both relative velocity and normal farce. Using this friction law, a contact stiffness matrix along the normal direction can be obtained. The out-of-plane motion is then investigated by both the stability analysis and the numerical analysis for various parametric conditions. The results show that the stiffness parameters of the pad and the disc must be controlled at the same time. Also, the numerical analysis shows the existence of limit cycle caused by the effect of intermittent contact stiffness.

• 대한건축학회논문집:구조계
• /
• 제35권9호
• /
• pp.171-182
• /
• 2019

Isogeometric concept is introduced to carry out free vibration analysis of plane structures. The geometry of structures is represented by using non-uniform rational B-spline surface (NURBS) and its basis function is consistently used in the formulation of plane stress element. In addition, multi-patch strategy is introduced to deal with the openings in building. The performance of the present isogeometric plane stress element is investigated by using five numerical examples. From numerical results, it is found to be that the isogeometric concept can successfully identify reliable natural frequencies and associated mode shapes of plane structures with/without openings in efficient way.

• 한국학교수학회논문집
• /
• 제13권1호
• /
• pp.1-21
• /
• 2010

본 논문은 2007년 개정 수학과 교육과정에서 제시된 평면도형 내용을 바탕으로, 교과용 도서에 제시된 평면도형의 지도내용과 지도방법을 분석하였다. 구체적으로 수학교과서에 제시된 평면도형의 전반적인 지도흐름을 분석함으로써 교육과정의 기본적인 취지를 어떻게 구현하는지 살펴보고, 도형지도에서 중요한 개념정의와 관련하여 교과서의 ‘약속하기’와 수학적 정의를 비교분석하였으며, 평면도형의 지도방법에 따라 교과서와 익힘책의 관련 내용을 면밀하게 분석하였다. 이를 통해 평면도형과 관련된 교과용도서 개발에 기초적인 자료 및 시사점을 제공하고자 한다.