• Interaction and multiscale mechanics
• /
• 제4권2호
• /
• pp.123-137
• /
• 2011

We review a series of crack problems arising in the general deformations of a linearly elastic solid (Mode-I, Mode-II and Mode-III crack) and, perhaps more significantly, when the contribution of surface effects are taken into account. The surface mechanics are incorporated using the continuum based surface/interface model of Gurtin and Murdoch. We show that the deformations of an elastic solid containing a single crack can be decoupled into in-plane (Mode-I and Mode-II crack) and anti-plane (Mode-III crack) parts, even when the surface mechanics is introduced. In particular, it is shown that, in contrast to classical fracture mechanics (where surface effects are neglected), the incorporation of surface elasticity leads to the more accurate description of a finite stress at the crack tip. In addition, the corresponding stress fields exhibit strong dependency on the size of crack.

• 대한전자공학회논문지SD
• /
• 제41권8호
• /
• pp.59-65
• /
• 2004

본 논문에서는 IT(In-plane switching foisted nematic) 모드를 기반으로 광 투과 특성을 개선시킨 Pseudo-TN IPS(Pseudo-Twisted Nematic In-Plane Switching) 모드를 새롭게 제안하고 그 광 투과 특성을 분석하였다. PTN-IPS 모드의 경우 개구율을 향상시켜 투과율 면적을 향상시킴으로써 종래의 IT 모드보다 약 25%정도의 높은 광 투과 특성을 나타내었으며, 전압인가에 따른 광 투과율의 변화가 선형적이므로, 광 투과율 조절을 위한 액정의 제어가 IT 모드에 비해 용이함을 확인하였다. 또한, IT 모드에 비해 수평방향 대비비는 약 8%정도 특성이 열화 되었으나 수직 방향에 있어서는 약 20%이상의 특성개선을 확인 할 수 있었다. 이와 더불어, 기존 IT 모드가 가지고 있는 샐 갭에 대한 특성 및 장점을 가지고 있어, 차세대 액정 셀을 개발하는데 유용하게 사용될 것이라 생각된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1992년도 춘계학술대회 논문집 92
• /
• pp.83-102
• /
• 1992

As shear localization is observed in different deformation modes, an attempt is made to understand the conditions for shear localization in general deformation modes. Most emphasis in put upon the effects of pre-localization deformation mode on the onset of shear localization and all the other well-recognized effects of subtle constitutive features and imperfection sensitivity studied elsewhere are not investigated here. Rather, an approximate perturbation stability analysis is performed for simplified isotropic rigid-plastic solids subjected to general mode of homogeneous deformation. Shear localization is possible in any deformation mode if the material has strain softening. The incipient rate of shear localization and shear plane orientations are strongly dependent upon the pre-localization deformation mode. Significant strain softening is necessary for shear localization in homogeneous axisymmetric deformation modes while infinitesimal strain softening is necessary for shear localization in plane strain deformation mode. In any deformation mode, there are more than one shear plane orientation. Except for homogeneous axisymmetric deformation modes, there are two possible shear plane orientations with respect to the principal directions of stretching. Some well-known examples are discussed in the light of the current analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1092-1095
• /
• 2003

A driving mechanism and excellent features for an in-plane switching twisted nematic liquid crystal mode (IT mode) that could possibly improve the viewing-angle and color shift characteristics and the cell gap error tolerance is proposed. .It is important that the surface azimuthal anchoring strength of the liquid crystal cell differs at the upper and lower substrates. Furthermore. as a rubbing-free LCD. amorphously aligned in-plane switching twisted nematic mode (a-IT mode) is also demonstrated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.337-338
• /
• 2008

We have studied electro-optic characteristics of a high performance liquid crystal display using Fringe In-plane field Switching (FIS) mode. The strong electric fields cause more liquid crystals to reorient almost in plane above and between the pixel electrodes. As a result, the operation voltage is lower and transmittance is higher than those of Fringe Field Switching (FFS) and In-Plane Switching (IPS) modes. Apparently, the transmittance depends on voltage applied at the configurations of FIS mode which are proposed. Therefore, we have studied certain length of between electrodes for maximum transmittance and light intensity.

• 한국산업정보학회논문지
• /
• 제22권3호
• /
• pp.39-47
• /
• 2017

깊이 화면을 부호화함에 있어서 깊이 화면의 일부를 평면으로 추정하여 부호화하는 평면 부호화 모드를 적용할 수 있다. 본 논문에서는 평면 부호화 모드를 통한 깊이 영상 부호화에서 가변 블록 부호화를 위해 가변 블록 크기를 결정하는 방법을 제안한다. 깊이를 통해 블록 내 화소에 대해 제일 근접한 평면을 추정하는 방법을 통해 평면 부호화를 수행할 수 있다. 평면 부호화를 수행할 때, 가변 블록 부호화를 다음과 같이 적용할 수 있다. 먼저 최대 블록 크기에 대하여 추정 오차를 계산한 뒤 오차가 임계값 이하라면 해당 블록 크기가 선택 된다. 반면 오차가 임계값을 초과한다면 해당 블록이 분할되고 위 과정을 반복한다. 분할된 블록 크기가 최소 블록 크기 미만이 되면 해당 블록은 평면 부호화 모드로 선택되지 않는다. 제안된 방법을 실험한 결과, 부호화하여야 할 블록의 개수가 평면으로 이루어진 영상에서 고정 블록 크기를 이용한 방법에 비해 19%로 줄었다.

• 드라이브 ㆍ 컨트롤
• /
• 제18권3호
• /
• pp.16-22
• /
• 2021

The variable structure controller has the characteristic that while in sliding mode, the system moves along the switching plane in the vicinity of the switching plane, so it is robust to the parameter fluctuations of the plant. However, a controller based on a variable structure may not meet the desired performance when it is commanded to track any input or exposed to disturbances. To solve this problem, a sliding mode controller based on the IVSC approach excluding an integrator is proposed in this study. The proposed sliding mode control was applied to the position control of a hydraulic cylinder piston. The sliding plane was determined by the pole placement and the control input was designed to ensure the existence of the sliding mode. The feasibility of the modeling and controller was reviewed by comparing it with a conventional proportional control through computer simulation using MATLAB software and experiment in the presence of significant plant parameter fluctuations and disturbances.

• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.910-918
• /
• 2004

The vibration analysis of an axially moving membrane are investigated when the membrane has the two sets of in-plane boundary conditions, which are free and fixed constraints in the lateral direction. Since the in-plane stiffness is much higher than the out-of-plane stiffness, it is assumed during deriving the equations of motion that the in-plane motion is in a steady state. Under this assumption, the equation of out-of-plane motion is derived, which is a linear partial differential equation influenced by the in-plane stress distributions. After discretizing the equation by using the Galerkin method, the natural frequencies and mode shapes are computed. In particular, we put a focus on analyzing the effects of the in-plane boundary conditions on the natural frequencies and mode shapes of the moving membrane.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.106-111
• /
• 1999

This study discusses a non-contact optical technique electronic, electronic speckle pattern interferometry(ESPI) that is well suited for in-plane and out-of-plane deformation measurement Used as specimen which has the boundary condition of two clamped parallel edges composite material AS4/PEEK[30/-30/90]s was analyzed by ESPI to determined the characteristics of tensile and vibration. These are quantitativly compared with the result of FEM analysis. Finally the results of this study are briefly summarized as follows : (1) In the in-plane strain analysis by comparison of theoretical results with experimental results qualitatively we confirmed that measurement errors are within 3 % in case of accuracy (2) From comparison of experimental vibration modes with numerical vibration mode shapes by the FEM analysis quantitatively we confirmed that vibration mode measurement by the ESPI has high accuacy.

• 대한전자공학회논문지
• /
• 제22권6호
• /
• pp.46-52
• /
• 1985

본 논문은 구형 마이크로스트립 안테나의 H-plane 상호결합에 관한 연구이다. 두 안테나의 상호결합을 계산하기 위해서 단일 마이크로스트립 패치의 교사저항을 구하였으며 결합된 전송선로를 even mode와 add mode로 분발하여 각 mode의 특성저항와 실효 유전률을 계산하였다. 이로부터 자계적으로 결합된 안테나를 S-band 주파수에서 S-parameter를 구한 결과 이론치와 실험치가 거의 일치함을 확인할 수 있었다.