• 대한건축학회논문집:계획계
• /
• 제34권7호
• /
• pp.13-20
• /
• 2018

In this study, it was started with the research for improving the housing plan of the elderly and the aged housing environment. The spatial extent of the study is in Haedoji Village, Yeongdo, Busan, and the time ranged from the mid-1950s, when the Korean war broke out and the refugees started to settle, to the present as of August 2017. As Result, the size of the residential space per capita was overcrowded at $9.2m^2$ in the 1970s and 1980s, when the number of families was high, but since 2010, the size of the residential space currently living alone with only one elderly or couple was $29.2m^2$. In the future, it can be judged that the size of elderly housing can be expected to be envisioned within about $35{\sim}40m^2$ in consideration of the diversity of housing including table space in the 2LDK type.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권1호
• /
• pp.1-13
• /
• 2010

A comparative study between a computation and an experiment has been conducted to predict the performance of a Pod type waterjet for cm amphibious wheeled vehicle. The Pod type waterjet has been chosen on the basis of the required specific speed of more than 2500. As the Pod type waterjet is an extreme type of axial flow type waterjet, theoretical as well as experimental works about Pod type waterjets are very rare. The main purpose of the present study is to validate and compare to the experimental results of the Pod type waterjet with the developed CFD in-house code based on the RANS equations. The developed code has been validated by comparing with the experimental results of the well-known turbine problem. The validation also extended to the flush type waterjet where the pressures along the duct surface and also velocities at nozzle area have been compared with experimental results. The Pod type waterjet has been designed and the performance of the designed waterjet system including duct, impeller and stator was analyzed by the previously mentioned m-house CFD Code. The pressure distributions and limiting streamlines on the blade surfaces were computed to confirm the performance of the designed waterjets. In addition, the torque and momentum were computed to find the entire efficiency and these were compared with the model test results. Measurements were taken of the flow rate at the nozzle exit, static pressure at the various sections along the duct and also the nozzle, revolution of the impeller, torque, thrust and towing forces at various advance speed's for the prediction of performance as well as for comparison with the computations. Based on these measurements, the performance was analyzed according to the ITTC96 standard analysis method. The full-scale effective and the delivered power of the wheeled vehicle were estimated for the prediction of the service speed. This paper emphasizes the confirmation of the ITTC96 analysis method and the developed analysis code for the design and analysis of the Pod type waterjet system.

• 식품보건융합연구
• /
• 제6권4호
• /
• pp.11-16
• /
• 2020

Footpad dermatitis (FPD) can be considered as a threat for poultry production due to it causes losses due to condemnation in slaughterhouse. The prevalence and the severity of FPD in broiler breeders increase over time with development of poultry industry. The condition is produced by multifactorial including include drinker design and management, diet composition, house (temperature and humidity levels), litter (type, quality, and quantity) and gut health. Bacterial infections can be associated. FPD lesions can develop in less than a week. FPD is a variable size of inflammatory lesion of the footpad in commercial poultry characterized by necrotic lesions on the plantar surface of the footpad of poultry. These lesions can be exposed after removal of fecal mass and litter stuck on it. There are considerable and numerous interactions between the environment and the genetic traits. Prevention depends mainly on improvement of litter condition. Genetic selection against footpad dermatitis must be contributed to reduce pain and suffering for particular bird experiencing contact dermatitis as well as to avoid economic losses. The objective of this review is to collect different literature written about FPD to be available to students, researchers and veterinarian in poultry practical.

• 지역사회간호학회지
• /
• 제23권4호
• /
• pp.376-385
• /
• 2012

Purpose: The aim of this study was to evaluate the effects of tailored case management using a gatekeeper on depression and life satisfaction in the single-household elderly population. Methods: The design of Quasi experiment was applied to compare the variables before and after the management. Ninety-seven people who had depression categorized by the Korean Geriatric Depression Scale. Results: Depression (t=11.22, p<.001) and life satisfaction (t=-5.36, p<.001) were improved after management in comparison to the results of pre-tests, and the differences were statistically significant. The difference in the pre-test and post-test scores of the support system ($x^2$=13.89, p<.001) were significant, while the differences in the perception of depression ($x^2$=.02, p=.891) and coping methods ($x^2$=.34, p=.558) were not statistically significant. Conclusion: Tailored case management using a gatekeeper is effective to reduce the degree of depression and improve life satisfaction in the single-household elderly population having depression. This study offers a model of individualized as well as systemic mental health care for the community of single-house hold elderly people as an effective means for prevention of and early intervention in depression.

• 박물관보존과학
• /
• 제23권
• /
• pp.49-60
• /
• 2020

국립중앙박물관 소장 운보문단 보자기(증9393) 유물의 전시와 안전한 보호를 위한 보존처리를 실시하였다. 이후 보존 처리한 직물 무늬의 시대를 추정하기 위하여 함께 기증 된 이항복(1556-1618)의 17세기 활동시기와 후모본(後模本) 초상화의 제작시기인 18세기의 유물과 비교하여 운보문단 보자기 무늬의 구성과 연대를 추정하였다. 운보문단의 시대 추정을 위해 시대가 확실한 유물과 비교한 내용을 확인한 결과는 다음과 같다. 첫째, 이항복의 생몰년(1556-1618)을 기준으로 유사한 시기의 출토복식과 의궤의 표지의 무늬와 비교하였으나 운두와 꼬리크기의 비율에서 확연히 차이가 보여 이항복의 생몰년 대에 제작한 직물로는 추정되지 않다고 판단되었다. 둘째, 이항복의 호성공신과 위성공신 초상 후모본의 제작시기인 18세기 운보문단 직물 무늬와 비교한 결과 가장 유사한 1702년 『숙종인원왕후가례도감의궤』 표지의 운보문단이 확인 되었으며, 이외 1730년대까지의 의궤표지와 출토직물에서 배열, 크기, 비율 등 유사한 구성양식을 나타내고 있었다. 보자기의 정확한 용도는 확인 할 수 없었지만 함께 기증 된 후모본 초상화와 유사한 18세기 초에 제작된 것으로 추정할 수 있다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권4호
• /
• pp.11-17
• /
• 2020

This paper proposed the design of a new window signage system architecture, which utilized a window of a building, with attached LED for visible light communication. In this paper, the proposed method using the LED strip to transmit light data and receive the data through a HMD with a smart device camera. The LED strip attached to the existing building window, as a part of semi-transparent signage. Semi-transparent signage based on a controllable LED strip-modules and attached to the window used to provide entertainment contents and the information service to people through optical camera communication (OCC) as well. Also, this work suggests using the camera supplied Head Mounted Device (HMD) as an OCC receiver. The LED attached window signage system structure described in this paper can be utilized in various buildings infrastructure like house, shopping areas, industrial building, etc.

• Wind and Structures
• /
• 제11권3호
• /
• pp.193-208
• /
• 2008

This paper focuses on assessing the failure of one of the transmission towers that collapsed in Winnipeg, Canada, as a result of a microburst event. The study is conducted using a fluid-structure numerical model that was developed in-house. A major challenge in microburst-related problems is that the forces acting on a structure vary with the microburst parameters including the descending jet velocity, the diameter of the event and the relative location between the structure and the jet. The numerical model, which combines wind field data for microbursts together with a non-linear finite element formulation, is capable of predicting the progressive failure of a tower that initiates after one of its member reaches its capacity. The model is employed first to determine the microburst parameters that are likely to initiate failure of a number of critical members of the tower. Progressive failure analysis of the tower is then conducted by applying the loads associated with those critical configurations. The analysis predicts a collapse of the conductors cross-arm under a microburst reference velocity that is almost equal to the corresponding value for normal wind load that was used in the design of the structure. A similarity between the predicted modes of failure and the post event field observations was shown.

• Ocean Systems Engineering
• /
• 제11권4호
• /
• pp.313-330
• /
• 2021

In this study, the dynamic interaction between an Arctic Spar and drifting level ice is examined in time domain using the newly developed ice-hull-mooring coupled dynamics program. The in-house program, CHARM3D, which is the hull-riser-mooring coupled dynamic simulator is extended by coupling with the open-source discrete element method (DEM) simulator, LIGGGHTS. In the LIGGGHTS module, the parallel-bonding method is implemented to model the level ice using an assembly of multiple bonded spherical particles. As a case study, a spread-moored Artic Spar platform, whose hull surface near waterline is the inverted conical shape, is chosen. To determine the breaking-related DEM parameter (the critical bonding strength), the four-point numerical bending test is used. A series of numerical simulations is systematically performed under the various ice conditions including ice drift velocity, flexural strength, and thickness. Then, the effects of these parameters on the ice force, platform motions, and mooring tensions are discussed. The simulations reveal various features of dynamic interactions between the drifting ice and moored platform for various ice conditions including the novel synchronous resonance at low ice speed. The newly developed simulator is promising and can repeatedly be used for the future design and analysis including ice-floater-mooring coupled dynamics.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권11호
• /
• pp.1652-1662
• /
• 2014

The present study investigated the optimum blending condition of protected fat, choline and yeast culture for lowering of rumen temperature. The Box Benken experimental design, a fractional factorial arrangement, and response surface methodology were employed. The optimum blending condition was determined using the rumen simulated in vitro fermentation. An additive formulated on the optimum condition contained 50% of protected fat, 25% of yeast culture, 5% of choline, 7% of organic zinc, 6.5% of cinnamon, and 6.5% of stevioside. The feed additive was supplemented at a rate of 0.1% of diet (orchard grass:concentrate, 3:7) and compared with a control which had no additive. The treatment resulted in lower volatile fatty acid (VFA) concentration and biogas than the control. To investigate the effect of the optimized additive and feed energy levels on rumen and rectal temperatures, four rumen cannulated Hanwoo (Korean native beef breed) steers were in a $4{\times}4$ Latin square design. Energy levels were varied to low and high by altering the ratio of forage to concentrate in diet: low energy (6:4) and high energy (4:6). The additive was added at a rate of 0.1% of the diet. The following parameters were measured; feed intake, rumen and rectal temperatures, ruminal pH and VFA concentration. This study was conducted in an environmentally controlled house with temperature set at $30^{\circ}C$ and relative humidity levels of 70%. Steers were housed individually in raised crates to facilitate collection of urine and feces. The adaptation period was for 14 days, 2 days for sampling and 7 days for resting the animals. The additive significantly reduced both rumen (p<0.01) and rectal temperatures (p<0.001) without depressed feed intake. There were interactions (p<0.01) between energy level and additive on ruminal temperature. Neither additive nor energy level had an effect on total VFA concentration. The additive however, significantly increased (p<0.01) propionate and subsequently had lower acetate:propionate (A/P) ratios than non-additive supplementation. High concentrate diets had significantly lower pH. Interactions between energy and additive were observed (p<0.01) in ammonia nitrogen production. Supplementation of diets with the additive resulted in lower rumen and rectal temperatures, hence the additive showed promise in alleviating undesirable effects of heat stress in cattle.

• Journal of Information Display
• /
• 제13권1호
• /
• pp.17-20
• /
• 2012

The current panels for liquid crystal display (LCD) TV sets are all characterized by pins placed on two sides. To manufacture one type of panel, a dedicated mask is needed, and the production line should be started once. Moreover, the whole panel needs to be removed if a dead pixel is found. If the panel, however, will first be fabricated with pins placed on four sides and then divided by a cross-cut into four equal-sized panels with pins placed on two sides, one set of masks can be used to manufacture two types of LCD panels, which was referred to by the authors as dual mode. In this paper, the concept of the dual mode and its differences from the conventional way of producing panels are introduced. Its advantages in boosting production efficiency, improving the product's good rate, and lowering the production cost are also described based on case studies. Of particular importance is the fact that the dual mode is very suitable for the trial production of very-large-area LCD TV sets.