• 한국토양비료학회지
• /
• 제49권5호
• /
• pp.598-607
• /
• 2016

This study was conducted to evaluate the amount of nitrogen (N) top dressing based on the normalized difference vegetation indices (NDVI) by ground based sensors for leaf perilla under the polyethylene house. Experimental design was the randomized complete block design for five N fertilization levels and conventional fertilization with 3 and 4 replications in Gumsan-gun and Milyang-si field, respectively. Dry weight (DW), concentration of N, and amount of N uptake by leaf perilla as well as NDVIs from sensors were measured monthly. Difference of growth characteristics among treatments in Gumsan field was wider than Milyang. SPAD-502 chlorophyll meter reading explained 43.4% of the variability in N content of leaves in Gumsan field at $150^{th}$ day after seedling (DAS) and 45.9% in Milyang at $239^{th}$ DAS. Indexes of red sensor (RNDVI) and amber sensor (ANDVI) at $172^{th}$ day after seedling (DAS) in Gumsan explained 50% and 57% of the variability in N content of leaves. RNDVI and ANDVI at $31^{th}$ DAS in Milyang explained 60% and 65% of the variability in DW of leaves. Based on the relationship between ANDVI and N application rate, ANDVI at $172^{th}$ DAS in Gumsan explained 57% of the variability in N application rate but non significant relationship in Milyang field. Average sufficiency index (SI) calculated from ratio of each measurement index per maximum index of ANDVI at $172^{th}$ DAS in Gumsan explained 73% of the variability in N application rate. Although the relationship between NDVIs and growth characteristics was various upon growing season, SI by NDVIs of ground based remote sensors at top dressing season was thought to be useful index for recommendation of N top dressing rate of leaf perilla.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권3호
• /
• pp.433-442
• /
• 2013

This study aimed to compare the dynamics of air temperature and velocity under two different ventilation and housing systems during summer and winter in Korea. The $NH_3$ concentration of both housing systems was also investigated in relation to the pig's growth. The ventilation systems used were; negative pressure type for the enclosed pig house (EPH) and natural airflow for the conventional pig house (CPH). Against a highly fluctuating outdoor temperature, the EPH was able to maintain a stable temperature at 24.8 to $29.1^{\circ}C$ during summer and 17.9 to $23.1^{\circ}C$ during winter whilst the CPH had a wider temperature variance during summer at 24.7 to $32.3^{\circ}C$. However, the temperature fluctuation of the CPH during winter was almost the same with that of EPH at 14.5 to $18.2^{\circ}C$. The NH3 levels in the CPH ranged from 9.31 to 16.9 mg/L during summer and 5.1 to 19.7 mg/L during winter whilst that of the EPH pig house was 7.9 to 16.1 mg/L and 3.7 to 9.6 mg/L during summer and winter, respectively. These values were less than the critical ammonia level for pigs with the EPH maintaining a lower level than the CPH in both winter and summer. The air velocity at pig nose level in the EPH during summer was 0.23 m/s, enough to provide comfort because of the unique design of the inlet feature. However, no air movement was observed in almost all the lower portions of the CPH during winter because of the absence of an inlet feature. There was a significant improvement in weight gain and feed intake of pigs reared in the EPH compared to the CPH (p<0.05). These findings proved that despite the difference in the housing systems, a stable indoor temperature was necessary to minimize the impact of an avoidable and highly fluctuating outdoor temperature. The EPH consistently maintained an effective indoor airspeed irrespective of season; however the CPH had defective and stagnant air at pig nose level during winter. Characteristics of airflow direction and pattern were consistent relative to housing system during both summer and winter but not of airspeed. The ideal air velocity measurement favored the EPH and therefore can be appropriate for the Korean environment. Further emphasis on its cost effectiveness will be the subject of future investigations.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.82-96
• /
• 2019

A semi-submersible structure has been widely used for offshore drilling and production of oil and gas. The small water plane area makes the structure very sensitive to weight increase in terms of payload and stability. Therefore, it is necessary to lighten the substructure from the early design stage. This study aims at an optimization of hull structure based on a sophisticated yield and buckling strength in accordance with classification rules. An in-house strength assessment system is developed to automate the procedure such as a generation of buckling panels, a collection of required panel information, automatic buckling and yield check and so on. The developed system enables an automatic yield and buckling strength check of all panels composing the hull structure at each iteration of the optimization. Design variables are plate thickness and stiffener section profiles. In order to overcome the difficulty of large number of design variables and the computational burden of FE analysis, various methods are proposed. The steepest descent method is selected as the optimization algorithm for an efficient search. For a reduction of the number of design variables and a direct application to practical design, the stiffener section variable is determined by selecting one from a pre-defined standard library. Plate thickness is also discretized at 0.5t interval. The number of FE analysis is reduced by using equations to analytically estimating the stress changes in gradient calculation and line search steps. As an endeavor to robust optimization, the number of design variables to be simultaneously optimized is divided by grouping the scantling variables by the plane. A sequential optimization is performed group by group. As a verification example, a central column of a semi-submersible structure is optimized and compared with a conventional optimization of all design variables at once.

• 한국건설관리학회논문집
• /
• 제15권2호
• /
• pp.62-70
• /
• 2014

민간시설물인 공동주택은 한 건축물 안에 다수의 인원이 각각 독립생활을 할 수 있도록 지어진 주택으로서 부실점검에 의한 건축물 안전사고 발생 시 인명피해가 제일 많이 발생할 수 있는 건축물이다. 하지만 관리주체의 안전점검에 대한 의식부족 및 최저가입찰방식에 의한 진단업체의 저가수주 등으로 인해 형식적인 점검이 이루어지고 있는 실정으로 향후 구조물의 유지관리 등 보수 보강 시 막대한 대가가 투입되고, 구조물의 안전사고 발생 시 인적피해를 유발할 가능성이 크다고 판단된다. 이에 본 논문은 효율적인 정밀점검 수행을 위한 현행 기준의 개선점을 도출하고자 광주광역시 및 전라남도 지역의 2종 시설물에 대하여 최근 3년간 실시한 정밀점검 대상건축물 66개동의 설계대가 및 실행대가현황을 조사 분석한다. 이를 통해 2차 대상건축물을 선정하고, 선정 된 공동주택 10개 단지의 정밀점검 보고서 및 정밀점검 실행대가 산정 기준을 평가하여 현행 문제점 분석을 통한 개선점을 제시하고자 한다.

• 동력기계공학회지
• /
• 제19권2호
• /
• pp.78-83
• /
• 2015

In Korea, multi-housing in one of the most common types of residential space due to its easy management and convenience. In particular, south-facing plate-type(一) multi-housing has attracted a great deal of public interest because it consumes less energy compared with other types of multi-housing, making it advantageous from an energy-saving perspective. Although there have been many studies on the annual energy consumption of multi-housing in relation to building shape and area of window, there have not been sufficient research on the annual energy consumption of multi-housing in relation to individual units of the multi-housing. The purpose of this study is to propose a strategy for reducing energy consumption in plate-type(一) multi-housing, taking the units with the lowest energy consumption as the standard. The result, Standard Models's energy load was as 4000 ~ 5600kWh, and Passive Houses's energy load was less than Stand Models at the 1600kWh.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.1085-1097
• /
• 2022

A printed circuit steam generator (PCSG) is being considered as the component for pressurized water reactor (PWR) type small modular reactor (SMR) that can further reduce the physical size of the system. Since a steam generator in many PWR-type SMR generates superheated steam, it is expected that dryout front oscillation can potentially cause thermal fatigue failure due to cyclic thermal stresses induced by the transition in boiling regimes between convective evaporation and film boiling. To investigate the fatigue issue of a PCSG, a reference PCSG is designed in this study first using an in-house PCSG design tool. For the stress analysis, a finite element method analysis model is developed to obtain the temperature and stress fields of the designed PCSG. Fatigue estimation is performed based on ASME Boiler and pressure vessel code to identify the major parameters influencing the fatigue life time originating from the dryout front oscillation. As a result of this study, the limit on the temperature difference between the hot side and cold side fluids is obtained. Moreover, it is found that the heat transfer coefficient of convective evaporation and film boiling regimes play an essential role in the fatigue life cycle as well as the temperature difference.

• International Journal of Contents
• /
• 제16권4호
• /
• pp.26-38
• /
• 2020

Determining the optimal levels of the technical attributes (TAs) of a product to achieve a high level of customer satisfaction is the main activity in the planning process for quality function deployment (QFD). In real applications, the number of customer requirements for developing a single product is quite large, and the number of converted TAs is also high so the size of the house of quality (HoQ) becomes huge. Furthermore, the TA levels are often discrete instead of continuous and the product market can be divided into several market segments corresponding to the number of HoQ, which also unacceptably increases the size of the QFD optimization problem and the time spent on making decisions. This paper proposed a genetic algorithm (GA) solution approach to finding the optimum set of TAs in QFD in the above situation. A numerical example is provided for illustrating the proposed approach. To assess the computational performance of the GA, tests were performed on problems of various sizes using a fractional factorial design.

• 가정과삶의질연구
• /
• 제22권6호
• /
• pp.111-119
• /
• 2004

A rapid increase of the elderly population and changes in the social structure, family type and lifestyle bring us to the moment for considering the various aspects of supporting the elderly including the elderly housing facilities. Traditionally it is considered as a merit for a son to support parents in his own house. Hut recently the elderly increasingly want to live independently without support from their children. To satisfy these needs, new housing facilities for the elderly were developed by private non-profit foundations. A number of outstanding housing facilities for the elderly have been built in the last five years. These facilities show significant progress in housing for the elderly. Unfortunately, there u e no standard design checklists or guidelines for housing for the elderly available in Korea. The housing facilities were built based on foreign design guidelines or architect's experience. This research aims to develop an affordable design checklist that can meet the needs of the Korean elderly lifestyle. This study evaluated the senior residential facilities using Woo's checklist which consolidated the guidelines available here and abroad. As the result of this study, we presented the checklist subject in upper group $25\%, middle group, lower group $25\% distribution and 6, 5, 4, categories in order to importance. When designing the future senior residential facilities, a constraint can be made based on the scope and financial factors of the facility first and the determine how extensive the application of the checklist should be.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권4호
• /
• pp.740-756
• /
• 2017

This paper proposes a feedback-linearization-based control algorithm for multirotor unmanned aerial vehicles (UAVs). The feedback linearization scheme is highly efficient for considering nonlinearity between the rotational and translational motion of multirotor UAVs. We also propose a dynamic equation that reflects the aerodynamic effects of the vehicles; the equation's parameters can be determined through curve fitting using actual flight data. We derive the feedback linearization controller from the proposed dynamic equation, and propose a Luenberger observer to attenuate measurement noises. The proposed algorithm is implemented using our in-house flight control computer, and we describe its implementation in detail. To investigate the performance of the proposed algorithm, we carry out two flight scenarios: the first scenario, an autonomous landing on a moving platform, is a test of maneuverability; the second, picking up and replacing an object, test the algorithm's accuracy. In these scenarios, the proposed algorithm precisely controls multirotor UAVs, and we confirm that it can be successfully applied to real flight environments.

• 대한조선학회논문집
• /
• 제50권1호
• /
• pp.49-58
• /
• 2013

Recently, the design of commercial ships with less green-house gas is one of great interests in naval architecture fields. Ship designers are asked to find optimum hull forms with minimum resistance in ocean waves. The accurate computation of added resistance, therefore, is getting more important for the prediction of power increase in random ocean waves. This study focuses on the numerical computation of added resistance on ships with Ax-bow shapes which are designed to reduce added resistance. To this end, the time-domain Rankine panel methods based on weakly-nonlinear and weak-scatterer approaches are applied, which can reflect the influence of above-still-water bow shape. As computational models, KCS and KVLCC2 hull forms are considered. Each ship is combined with the three types of Ax-bow shape, and computational results are compared each other.