• Journal of Biomedical Engineering Research
• /
• v.38 no.4
• /
• pp.211-217
• /
• 2017

During the emergency situation such as cardiac arrest, cardiopulmonary resuscitation(CPR) is the most important treatment to maintain patient's blood circulation. Since the quality of CPR can not be easily measured or evaluated by the eye, an assistive device with an accelerometer can help to assess the pressure depth of CPR. In this study, we propose a single frequency analysis method to reduce the error of the accelerometer by extracting only one frequency component from the Fourier transform process. To verify the effectiveness of the single frequency analysis, acceleration data at CPR conditions were measured at a sampling rate of 50 / sec using a wristband equipped with an acceleration sensor. Then, We compared the existing distance estimation method and the single frequency analysis method using the measured data. The amplitude value proportional to the compression depth was obtained by applying the single frequency analysis method.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.3
• /
• pp.29-35
• /
• 2010

This paper discusses a method that can enhance the exactness of depth estimation of an image by PCA(Principle Component Analysis) based on feature reduction through learning algorithm. In estimation of the depth of an image, hyphen such as energy of pixels and gradient of them are found, those selves and their relationship are used for depth estimation. In such a case, many features are obtained by various filter operations. If all of the obtained features are equally used without considering their contribution for depth estimation, The efficiency of depth estimation goes down. This paper proposes a method that can enhance the exactness of depth estimation of an image and its processing speed is considered as the contribution factor through PCA. The experiment shows that the proposed method(30% of an feature vector) is more exact(average 0.4%, maximum 2.5%) than using all of an image data in depth estimation.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.65-71
• /
• 2022

In the case of Mobile PKG Trend is in a situation where a decrease in Mold Top Margin is inevitable due to its miniaturization and high capacity product requirements. However, conventional laser marking technology has an average depth of deep, and when applied to narrow top margin products, PKG strength is expected to decrease due to overlapping processing, and reliability is reduced due to poor quality such as chip damage due to laser exposure. Therefore, we have secured the technology through research on low-depth laser marking solutions that can accommodate narrow top margin products. As a result of the evaluation of applicable technology application for PKG development products, it was verified that the marking depth decreased by 67% reduced and the PKG strength increased by 12%. Furthermore, the quality verification of Laser Damage that can occur through PKG Mechanical analysis was performed, and no Chip Damage defects were found. This ensured the stability of mass production application quality.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1296-1305
• /
• 2008

In this study, the spatial distribution of depth between alluvial soil and weathered soil of Song-do new city is analyzed using geostatistics. From analysis results, the boundary depth of north-east region is deeper than that of south-west region, and average depth of north-east region is 27.14m and average depth of south-west region is 23.25m. The boundary depth is estimated by ordinary kriging and inverse distance method, and estimated results are almost similarity. So, in Song-do new city, these two method can be used to estimate the boundary depth. The ordinary kriging method is a very useful tool because the more exact analysis of spatial continuity and distribution characteristic is possible.

• Korean Journal of Child Education & Care
• /
• v.19 no.3
• /
• pp.31-46
• /
• 2019

Objective: This research draws synthesized and objected results regarding the factors that influence burnout of child care teachers. The purpose for this is to understand in-depth of the burnout child care teachers experience at site through understanding their experience in depth. Methods: A mix research method including meta-analysis and in-depth interview was proceeded. Results: The main factor of burnout of the child care teacher is structural characteristics factor. Also through in-depth interview 13 main subjects and 28 detailed subject were found in the factors that affect burnout of child care teachers. Most factors which were meaningful results from the meta-analysis were re-confirmed through the in-depth interview. Out of those, the most effective sub-factor showed psychological factor of self-esteem. Conclusion/Implications: Based on these results, we have suggested child care environment unification, training education process for child care teachers, reinforcement of qualification standard, and accreditation system in order to enhance qualitative child care service and reduce exhaustion of child care teachers.

• The korean journal of orthodontics
• /
• v.15 no.1
• /
• pp.23-42
• /
• 1985

The morphology and growth changes of the Craniofacial Complex are important in orthodontics and cephalometrics for analysis and evaluation of facial bone growth are widely used. The author analyzed the data using lateral cephalometric roentgenogram of 75 Korean male and 50 Korean females age of 6 to 10 with normal occlusion to provide informations-relative rates of facial bone growth of Korean which is to be contributed in Korean standard. The results were as follows: 1. Means, standard deviation and coefficient of variation of Korean children were obtained. 2. The item which showed significent difference between male and female was craniofacial height in absolute dimension. 9. No difference of sex was showed in increment of craniofacial height and depth. 4. Among the craniofacial depth increments, the lower facial depth dimension increased most, midfacial depth dimension increased less, and cranial depth dimension increased the least. 5. The horizontal body of mandible showed rapid growing tendency more than did the ascending ramus.

• Journal of the Korean Society of Safety
• /
• v.29 no.2
• /
• pp.7-11
• /
• 2014

The electric shock victims were predominantly male, and more than half of the victims were found in companies with less than five employees in terms of the scale of company, and also more than half of victims had less than one month of experience for work experience. Considering the category of industry, more than half of the victims were engaged in construction, and considering the subcategory of industries, more than 60% of electric shock victims were found in building and other construction works. This study intended to conduct an in-depth analysis on the cause of electric shock accidents to provide basic data for policy proposing taking into considering the characteristics such as the electric shock path, low voltage, grounding and protection of workers. Also this study conducted an in-depth analysis of electric shock accidents for the past eleven years taking into account the necessity of a long-term plan.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.2013-2017
• /
• 2019

The radon concentrations in soil air were measured before and after a rainfall. ²²⁶Ra concentration, porosity, moisture content and temperature in soil were measured at Kyungpook National University in Daegu. As the results of measurement and analysis, the arithmetic mean of measured ²²²Rn concentration increased from 12100 ± 500 Bq/㎥ to 16200 ± 600 Bq/㎥ after the rainfall. And the measured ²²⁶Ra concentration was 61.4 ± 5.7 Bq/kg and the measured porosity was 0.5 in soil. The estimated values of ²²⁶Ra concentration and porosity using diffusion model of ²²²Rn in soil were 60.3 Bq/kg and 0.509, respectively. The estimated values were similar to the measured values. ²²²Rn concentration in soil increased with depth and moisture content. The estimations were obtained through fitting based on the diffusion model of ²²²Rn using the measurement values. The measured depth profiles of ²²²Rn were similar to the calculated depth profiles of ²²²Rn in soil. We hope that the results of this study will be useful for environmental radiation analysis.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.177-178
• /
• 2015

Sediments play a major role in determining pollution pattern in aquatic systems and reflecting the pollutant deposition. In the present study analysis the depth effect of organic pollutants and heavy metals using slow release biostimulant ball (BSB) in coastal sediment. BSB size fixed at 3cm, depth varied from 0cm to 10cm depth and 1 and 3 month interval period was carried out for the study. The organic pollutants of chemical oxygen demand, total solids and volatile solids were significantly changed at the surface sediment (0cm)in 1 month and 3 month interval time using BSB. In contrast, sediment depth increase upto 10cm the reduction percentage decrease like to control. Vertical distribution of heavy metals are not consistent from the surface layer toward the bottom layers. Heavy metals fractions were significantly changes, the exchangeable fraction was reduced and other organic and residual fractions were stabilized percentage are increased. This finding concluded BSB is effective for reduce organic pollutants, heavy metals stabilization from the contaminated sediment.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.315-322
• /
• 2001

Underground flexible pipes for electric cables are subject to external loads and surrounding soil pressure. Particularly, strain of flexible pipes is of great concern in terms of safety and maintenance for electric cables. In this paper, stress and strain of flexible pipes with various depth are calculated using traditional formula and FEM analysis. The results show that theoretical values are more conservative in strain whereas FEM analysis gives larger stress. Considering the strain criteria - 3.5 %, maximum, flexible pipes can be buried at the range of 50cm to 5m in depth without additional soil improvement.