• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.318-324
• /
• 2015

Purpose: This study compared shear bond strengths of five self-adhesive cements with phosphate monomer to zirconium oxide ceramic with and without airborn particle abrasion. Materials and methods: One hundred zirconia samples were air-abraded ($50{\mu}mAl_2O_3$). One hundred composite resin cylinders were fabricated. Composite cylinders were bonded to the zirconia samples with either Permacem 2.0 (P), $Clearfil^{TM}$ SA Luting (C), $Multilink^{(R)}$ Speed (M), $RelyX^{TM}$ U200 Automix (R), G-Cem $LinkAce^{TM}$ (G). All bonded specimens were stored in distilled water ($37^{\circ}C$) for 24 h and half of them were additionally aged by thermocycling ($5^{\circ}C$, $55^{\circ}C$, 5,000 times). The bonded specimens were loaded in shear force until fracture (1 mm/min) by using Universal Testing Machine (Model 4201, Instron Co, Canton, MA, USA). The failure sites were inspected under field-emission scanning electron microscopy. The data was analyzed with ANOVA, Tukey HSD post-hoc test and paired samples t-test ($\alpha$=.05). Results: Before and after thermocycling, $Multilink^{(R)}$ Speed (M) revealed higher shear-bond strength than the other cements. G-Cem $LinkAce^{TM}$ (G) showed significantly lower bond strengths after thermocycling than before treatment (P<.05), but the other groups were not significantly different (P>.05). Conclusion: Most self-adhesive cements with phosphate monomer showed high shear bond strength with zirconia ceramic and weren't influenced by thermocycling, so they seem to valuable to zirconia ceramic bonding.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.1
• /
• pp.33-41
• /
• 2011

The objective of this study was to compare the shear bond strengths of five dentin adhesive systems cured with three different light curing sources. Seventy five noncarious permanent teeth were collected and stored in an 0.1% thymol solution at room temperature after extraction. The tested adhesives were: Adper Scotchbond Multi-purpose Plus Adhesive (SM) Adper Single bond 2 (SB), Clearfil SE Bond (SE), Adper Prompt L-Pop (PL), G-Bond (GB). And three light curing unit systems were used: Elipar Free light 2(LED), OptiLux 501 (Halogen), Flipo (PAC). For the shear bonding test, the labial and lingual surfaces of permanent teeth were used. To obtain a flat dentin surface, the labial and lingual surfaces of the teeth were sanded on SiO2 with number 600 grit and then divided into 15 groups of 10 surfaces each. All samples were theromocycled in water $5^{\circ}C$ and $55^{\circ}C$ for 1000 cycles. The results were as follows: 1. When cured with Freelight 2, the shear bond strength of SM was significantly higher than that of PL, GB (p<0.05), whereas no significant difference was found among those of any other bonding agents. 2. When cured with Optilux 501, the shear bond strength of SM was significantly higher than those of any other bonding agents (p<0.05), whereas no singnificant difference was found among those of andy other bonding agents. 3. When cured with Flipo, the shear bond strength of SM was significantly higher than those of SB, SE, GB (p<0.05), whereas no significant differences was found among those of any other bonding agents. 4. For comparison according to three different light cure unit system, except SB and GB, each three dentin bonding agents showed no significant difference. For SB, only Freelight 2 was significantly higher than the others, with no significant difference between Optilux 501 and Flip. For GB, Statistically significant difference was found only between Freelight and Flipo.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.3
• /
• pp.410-424
• /
• 2011

This study was investigated for the purpose of obtaining basic data which can be applied to processing of canned sea mussel using tomato paste. Shell were washed, and then steamed and shucked. Sea mussel meat was prepared with ratio of sea mussel 90g, tomato paste sauce 65g(tomato paste 42%, gum guar 1.0%, salt 2.0%, starch syrup 2.0%, cooking wine 1%, water 52%). The sea mussel meats were packed with vacuum seamer in 301-3 can, and then sterilized for various F0 value(F0 8-12 min.) in a steam system retort at $118^{\circ}C$. The factors such as pH, VBN, amino-N, total amino acid, free amino acid, chemical composition, color value (L, a, b), texture profile, TBA value, mineral, sensory evaluation and viable bacterial count of the canned sea mussel produced with various sterilization condition(F0 8-12 min.) were measured. The same element was also measured during preservation. The results showed that the product sterilized at F0 8 min. and preserved for 90 days were the most desirable.

• Journal of Ginseng Research
• /
• v.32 no.3
• /
• pp.179-186
• /
• 2008

Effect of pulverization on total solid, crude saponin, and acidic polysaccharide contents of dried red ginseng main root were tested. Several particle size samples, including red ginseng main root (non pulverized), $10{\sim}40$ mesh powder, $40{\sim}100$ mesh powder, and >100 mesh powder were used in the extraction. The sequential solvent extraction method (1st: 70% EtOH at $70^{\circ}C$ for 12 hr, 2nd: 70% EtOH at $70^{\circ}C$ for 12 hr, 3rd: water at $70^{\circ}C$ for 12 hr) was applied to extract the saponins and acidic polysaccharide. Extraction yield of total solid of pulverized red ginseng ($10{\sim}40$ mesh size) was increased to 20% compared with that of non-pulverized. Especially, the crude saponin content of pulverized red ginseng ($10{\sim}40$ mesh size) showed an increase of 47% over non-pulverized. No difference in the component ratio was observed by pulverization, when the individual ginsenosides were quantified by HPLC. Also, extraction yield of acidic polysaccharide of pulverized red ginseng ($10{\sim}40$ mesh size) was increased 57% compared with that of non-pulverized. The results suggested that pulverization might be useful for increasing the extraction yield of red ginseng components.

• Food Science and Preservation
• /
• v.11 no.2
• /
• pp.195-200
• /
• 2004

Microbial lethal value and nutrient retention of sous vide processed spinach were evaluated with mathematical model prediction and experimental trial for different package sizes and pasteurization temperatures. The package size covers 500 g, 1 kg and 2 kg, while the pasteurization temperature includes 80, 90 and 97$^{\circ}C$. The basic process scheme consists of filling blanched spinach into barrier plastic film pouch, sealing under vacuum, pasteurization in hot water with over pressure and final cooling to 3$^{\circ}C$. Pasteurization condition was designed based on attainment of 6 decimal inactivation of Listeria monocytogenes at geometric center of the pouch package by heating cycle, which was determined by general method. Heat penetration property of the package and thermal destruction kinetics were combined to estimate the retention of ascorbic acid and chlorophyll. Smaller packages with shorter pasteurization time gave better nutrient retention, physical and chemical qualities. Larger package size was estimated and confirmed experimentally to give higher pasteurization value at center, lower ascorbic acid and chlorophyll contents caused by longer heat process time. Lower pasteurization temperature with longer process time was predicted to give lower pasteurization value at center and lower ascorbic acid, while chlorophyll content was affected little by the temperature. Experimental trial showed better retention of ascorbic acid and chlorophyll for smaller package and higher pasteurization temperature with shorter heating time. The beneficial effect of smaller package and higher pasteurization temperature was also observed in texture, color retention and drip production.

• Journal of Life Science
• /
• v.18 no.1
• /
• pp.63-68
• /
• 2008

This study was carried out to investigate the effect of the addition of pine needle juice and mugwort juice on the color, hardness, pH, VBN content, TBARS value and total plate count of beef jerky during storage at room temperature for 60 days. Beef jerky was prepared by three types such as beef jerky containing 50 ml water (control), beef jerky containing 50 ml pine needle juice (PBJ) and beef jerky containing 50 ml mugwort juice (MBJ). The L (lightness) value of the control and PBJ was not significantly changed during storage, but the $L^*$ value of MBJ tended to increase during storage (p<0.05). The $a^*$ (redness) value had the highest at the 60 day storage, and the $a^*$ value of PBJ and MBJ were higher than that of the control (p<0.05). The $b^*$ (yellowness) had the highest at the 60 day storage (p<0.05), and the $b^*$ value was not significantly different among samples. The addition of pine needle juice and mugwort juice had no effect on the changes of color of beef jerky. The hardness tended to increase during storage period, the hardness of the control was higher than those of PBJ and MBJ until storage for 30 days (p<0.05). The pH of samples tended to decrease during storage period (p<0.05). The VBN content of samples tended to increase during storage period, and the VBN content of the control was higher than those PBJ and MBJ on the storage of 60 days (p<0.05). The TBARS value of samples tended to decrease during storage period, and the TBARS value of MBJ had the lowest during storage period (p<0.05). The total plate count tended to decrease during storage period (p<0.05), and the total plate count of control, PBJ and MBJ were 4.93, 4.11 and 4.17 log CFU/g, respectively.

• Radiation Oncology Journal
• /
• v.15 no.1
• /
• pp.71-78
• /
• 1997

Purpose : To collect beam data for dynamic wedge fields using conventional measurement tools without the multi-detector system, such as the linear diode detectors or ionization chambers. Materials and Methods : The accelerator CL 2100 C/D has two photon energies of 6MV and 15MV with dynamic wedge an91es of 15o, 30o, 45o and 60o. Wedge transmission factors, percentage depth doses(PDD's) and dose Profiles were measured. The measurements for wedge transmission factors are performed for field sizes ranging from $4\times4cm^2\;to\;20\times20cm^2$ in 1-2cm steps. Various rectangular field sizes are also measured for each photon energy of 6MV and 15MV, with the combination of each dynamic wedge angle of 15o 30o. 45o and 60o. These factors are compared to the calculated wedge factors using STT(Segmented Treatment Table) value. PDD's are measured with the film and the chamber in water Phantom for fixed square field. Converting parameters for film data to chamber data could be obtained from this procedure. The PDD's for dynamic wedged fields could be obtained from film dosimetry by using the converting parameters without using ionization chamber. Dose profiles are obtained from interpolation and STT weighted superposition of data through selected asymmetric static field measurement using ionization chamber. Results : The measured values of wedge transmission factors show good agreement to the calculated values The wedge factors of rectangular fields for constant V-field were equal to those of square fields The differences between open fields' PDDs and those from dynamic fields are insignificant. Dose profiles from superposition method showed acceptable range of accuracy(maximum 2% error) when we compare to those from film dosimetry. Conclusion : The results from this superposition method showed that commissionning of dynamic wedge could be done with conventional dosimetric tools such as Point detector system and film dosimetry winthin maximum 2% error range of accuracy.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.1
• /
• pp.34-39
• /
• 2001

The purpose of this study was to examine physical properties of the addition of green tea powder on bread flour and dough rheology of white pan bread. Three levels(0.1, 0.5 and 1.0% ) of each green tea powder with bread flour were tested for their effects in dough mixing using rapid disco analyzer, alveogram and farinogram. Addition of green tea powder tended to reduce initial pasting temperature and increase peak viscosity, break down and set back. L(extensibility) and G(swelling index) value in alveogram showed decrement with increasing green tea powder. These meant that the volume of white pan bread would show same tendency. The use of green tea powder increased consistency and water absorption of the bread flour but decreased development time, salability and degree of softening on farinogram. White pan bread with green tea powder had higher value of hardness and springness than without it. Sensory evaluation determined that the white pan bread with 0.5% green tea powder had the highest score.

• Korean journal of food and cookery science
• /
• v.17 no.5
• /
• pp.483-489
• /
• 2001

The objective of this study was to investigate the effect of ripening on the quality of kimchi or freeze-dried/rehydrated kimchi. Kimchi stored/ripened at 0$\^{C}$ for 120 days was taken at an interval of 10 days and freeze-dried/rehydrated with water. The number of lactic acid bacteria(LAB), shearing force and sensory properties of kimchi ripened (Raw sample) or kimchi ripened/freeze-dried/rehydrated (F/D sample) were observed. The results were as follows: (1) The number of LAB of Raw and F/D samples decreased slightly during ripening for 120 days, while the pH of both samples decreased. The number of LAB in kimchi decreased up to 6∼16% of the original value by freeze-drying. (2) Ripening for 120 days did not affect shearing force of kimchi while freeze-drying increased markedly its shearing force. (3) Although overall acceptability and taste of Raw and F/D samples decreased gradually, the degree of change between two samples was different. The odor of Raw and F/D samples decreased slightly during ripening for 120 days while the degree of change between two samples was similar after 70 days of ripening. Moistness of Raw and F/D samples was maintained relatively stable during ripening. Chewiness of Raw sample decreased during ripening for 120 days while that of F/D sample was not affected by ripening. Color of Raw and F/D sample was changed during ripening while the degree of change between two samples was not significant. It can be concluded that the change of some sensory properties between Raw sample and F/D sample was affected by ripening for 120 days while the change in the number of LAB, pH and shearing force between both samples was not affected markedly by ripening.

• Food Science of Animal Resources
• /
• v.26 no.3
• /
• pp.269-275
• /
• 2006

The objective of this study was to investigate the physicochemical, microbiological and sensory properties of food additive-free grilled pork products manufactured using loin (T1), tender loin (T2) and ham (T3). The samples were heated for 30 min at $60^{\circ}C$, and then 50 min for $150^{\circ}C$. After cooling, vacuum packaged grilled pork samples was stored at $4{\pm}1^{\circ}C$ for 40 days. The pH values of grilled pork samples ranged from 5.92 (T1) to 6.10 (T3) at the initial storage time, and from 6.28 (T1) to 6.60 (T3) after 40 days. The water holding capacities(%) was $85.99{\sim}93.24%$ for T1, $95.26{\sim}93.89%$ for T2 and $89.11{\sim}94.67%$ for T3, all of which were slightly higher than those of other pork products. The shear force values of T2 were significantly higher(p<0.05) than those of the other pork products throughout the storage period. The TBARS and VBN values of T2 were significantly higher(p<0.05) than those of T1 and T3. With regard to microorganisms, all grilled pork samples was in good condition, showing $1.93{\sim}3.48\;log_{10}$ CFU/g via total plate counts, and $1.74{\sim}3.48\;log_{10}$ CFU/g far lactic acid bacteria throughout the storage period. Regarding sensory evaluation, the scores of overall acceptability in all products were above 5.0 points through 40 days of storage.