• Journal of Korean Society of Forest Science
• /
• v.87 no.1
• /
• pp.20-26
• /
• 1998

The objective of this study was to determine the rate of nitrogen mineralization and nitrification in a mature sawtooth oak(Quercus acutissima $C_{ARRUTH}$) stand in the Chungbu Forest Experiment Station, Kyonggi Province. Nitrogen mineralization and nitrification in the top 15cm of mineral soil were examined from November 1995 to November 1996 using an in situ buried bag method. Net nitrogen mineralization was 95.2mg/kg/yr and nitrification was 65.4mg/kg/yr. Nitrification consisted of 69% of annual nitrogen mineralization. Neither nitrogen mineralization nor nitrification was significantly correlated with the monthly soil temperature and soil moisture content.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.8
• /
• pp.907-914
• /
• 2005

Experiments at the Japan Microgravity Center (JAMIC) have investigated the interaction between diffusion flames and solid surfaces Placed neat flames The fuel for the flames was $C_{2} H_{4}$ The surrounding oxygen concentration was 35$\%$ with surrounding air temperatures of $T_{a}$ : 300K. Especially, the effect of wall temperature on soot deposition from a diffusion flame Placed near the wall has been studied by utilizing microgravity environment, which can attain very stable flame along the wall. Cylindrical burner with fuel injection was adopted to obtain two dimensional soot distributions by laser extinction method. In the experiment two different wall temperatures. $T_{w}$=300, 800 K, were selected as test conditions The results showed that the soot distribution between flame and burner wall was strong1y affected by the wall temperature and soot deposition increases with decrease in wall temperature. The comparison among the values lot two different wall temperatures suggests that the change in thermophoretic effect is the most dominant factor to give the change in soot deposition characteristics.

• Journal of Pharmaceutical Investigation
• /
• v.1 no.1
• /
• pp.3-12
• /
• 1971

Many of the studies on absorption and excretion of drugs have been reported in the field of pharmaceutics, but the effect of acrid condiments for the absorption of drugs has not been. Hereupon, the authors investigated them in small intestine canal of rat in situ. In this experiment, aminopyrine, sulfadiazine and salicylic acid appended acrid condiments such as garlic, red pepper and pepper showed more increased absorption than constituted drugs. In particular, pepper showed the most increased than pepper, red pepper and garlic take lower absorption than pepper. When two drugs and over exist at a time, the efficacy is different from each other. Therefore, it is necessary to research of each circumstances administering one drug or compound drugs. We considers that we are abet to get safe and effectivecopound preparations when we studies on the effect. of drug action.

• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.556-567
• /
• 2015

The evaluation of THM coupling behavior in deep underground repository condition is essential for the long term safety and stability assessment of high-level radioactive waste repository. In order to develop reliable THM analysis techniques effectively, an international cooperation project, DECOVALEX, is carried out. In DECOVALEX-2015 Task B2, the in situ THM experiment planned to be conducted by JAEA was modeled by the research teams from the participating countries. In this study, a THM coupling technique combining TOUGH2 and FLAC was developed and applied to 1 dimensional THM modeling, in which rock, buffer, and heater are considered. The results were compared with those from other research teams.

• Tunnel and Underground Space
• /
• v.23 no.1
• /
• pp.66-77
• /
• 2013

This paper deals with Poisson's ratio and volumetric strain behavior on loading-reloading terms under uniaxial condition targeting 404 individual rocks, which include sedimentary rocks as sandstone, shale, mudstone, conglomerate and tuff on Kyungsang basin. Poisson' ratio demonstrates increase, convergence and decrease behavior according to the increase in load, which results in preponderance of increase behavior. Volumetric strain demonstrates normal, positive and negative behavior according to the increase in load, which results in preponderance of normal behavior. On practice, Poisson's ratio can be indicative of high or low values with low values of design load. Consequently, a careful selection of results in in-situ sample experiment should be made and varying design conditions should be considered.

• Journal of Powder Materials
• /
• v.25 no.4
• /
• pp.336-339
• /
• 2018

A unique porous material with controlled pore characteristics can be fabricated by the freeze-drying process, which uses the slurry of organic material as the sublimable vehicle mixed with powders. The essential feature in this process is that during the solidification of the slurry, the dendrites of the organic material should repel the dispersed particles into the interdendritic region. In the present work, a model experiment is attempted using some transparent organic materials mixed with glass powders, which enable in-situ observation. The organic materials used are camphor-naphthalene mixture (hypo- and hypereutectic composition), salol, camphene, and pivalic acid. Among these materials, the constituent phases in camphor-naphthalene system, i.e. naphthalene plate, camphor dendrite, and camphor-naphthalene eutectic exclusively repel the glass powders. This result suggests that the control of organic material composition in the binary system is useful for producing a porous body with the required pore structure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1B
• /
• pp.85-91
• /
• 2012

Permeable Reactive Barriers (PRBs) using zero valent iron (ZVI, $Fe^0$) is a promising technology for in-situ remediation of trichloroethylene (TCE) forming dense non aqueous phase liquid (DNAPL). The objective of this study is to develop an enhanced treatment method of trichloroethylene-contaminated groundwater using ZVI packed bed with direct current (D.C.). A column experiment was performed to investigate degradation efficiency of TCE that was performed in three different combination of control (only sand), ZVI column (ZVI:sand, packing ratio 1:2(v/v)) and bipolar column (ZVI:sand=1:2(v/v) with electric current) in the test columns. As the results of this study, the degradation efficiency of TCE was improved with simultaneous application of both bipolar column compared to that used ZVI column. Because ZVI particles are isolated and individual particles act like small electrodes. In this experiment, it was indicated a basic material for application of bipolar packed bed as electro-PRBs that was effective degradation of TCE.

• Journal of Korean Society on Water Environment
• /
• v.33 no.4
• /
• pp.409-415
• /
• 2017

This study aims to evaluate the effect of capping materials on blocking pollutant elution from contaminated sediment to water body. Experiments were carried out under conditions in which the elution rate was intensified artificially using compost with high concentration of organic compound and nutrient salts instead of sediments. Activated carbon (AC), modified activated carbon (MAC), P. putida immobilized activated carbon (PBAC) and effective microorganisms immobilized activated carbon (EBAC) were used as capping materials. Zeolite (ZT) and two kinds of commercially available microorganisms immobilized zeolite products (ZC, ZN) were used for comparison experiment. The elution rate of organic compound, nitrogen and phosphorus were compared with that of control experiment. The experiments were conducted for 56 days. Concentrations of chemical oxygen demand, total nitrogen, and total phosphorus were measured to use the comparison of release rate of organic compound, nitrogen and phosphorus. From the experimental results, AC based materials showed better performance to block the elution of organic compound and nitrogen than ZT based materials. Although ZT based materials were more effective than AC and PBAC to block phosphorus, MAC and EBAC showed the best performance of phosphorus elution blocking among the all candidate materials. In conclusion, EBAC is considered as the most effective capping materials, because organic compound, nitrogen and phosphorus will be degraded continuously by EM in the long term.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.6
• /
• pp.133-140
• /
• 2001

This paper suggests another system for a cutting force measuring tool in a milling process. Generally, tool dynamometer is taken into account for the most appropriate cutting force measuring tool in the analysis of cutting mechanism. However, high price and limited space make it difficult to be in-situ system for controllable milling process. Although an alternative method using AC current of servo-motor has been suggested, it is unsuitable for cutting force control because of small upper frequency limit and noise. The cutting force measuring system is composed of two load cells placed between the moving table bracket and the nut flange part of ballscrew. It has many advantages such as low cost and wide range measurement than tool dynamometer because of the built-in moving table and the low cost load cell. The static and dynamic model of the measuring system using imbeded load cell is introduced. Various Experiments are carried out to validate both models. By comparing the cutting forces from a series of end milling experiments on the tool dynamometer and the system developed in this paper, the accuracy of the cutting force measuring system is verified. Upper frequency limit is measured by the experiment of dynamic characteristics.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.171-175
• /
• 2010

Various soil characteristics for safe construction is necessary to understand the tests using the samples collected, and head in place an energy evaluation is conducted to evaluate the ground. In-Situ testing ground, Rod length and around the intrusive when the energy loss due to friction has been measured only in the head. Abstract The purpose of this agreement when increasing contract area of Rod agreement to transform the energy attenuation and the attenuation at the energy being delivered to evaluate. To this end, the same material used in the field test, laboratory test to apply Rod diameter and length have been considered, designed to perform the experiment was to use the Rod. Energy that raised at head of Rod, was increased and decreased by contracting type. The energy difference occurs in the head with the tip that shows the energy rating may be required at the tip is showing. Abstract The energy evaluation for the Rod field test to be at the basic sources and will be able to calculate the trusted information are measured from the tip.