• Fibers and Polymers
• /
• 제6권4호
• /
• pp.336-338
• /
• 2005

This paper investigates the influence of raw material and process parameters in spinning that affect the inter fiber cohesion in yams. An instrument has been developed for measuring the minimum twist of cohesion. With regard to the raw material parameters, the influence of different cotton fiber mixings for a given count of yarn is investigated. Also the effect of spinning to varying counts for a given cotton variety is studied. With regard to the process parameters, studies have been carried out to investigate the influence of noil extraction in comber, number of draw frame passages, draft pressure in ring frame and direction of twist. Cohesion improved with increase in the noil extraction percentage in the comber. Increase in the number of draw frame passages also improved the cohesion. Draft pressure in ring frame improved the fiber cohesion in yarn up to a pressure of $2.1kg/cm^2$. Direction of twist had no effect on the cohesion.

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.68-74
• /
• 2001

In the drawing of large size automotive panels, elastic deflection of die components is induced by the contact force between them. The deflection is nonuniform and locally distributed, and results in nonuniform material flow. In order to arrange such a nonuniform die gap, a correcting operation, so called die spotting, is inevitable, which requires trial and error works and consuming time. A prediction of the bending deflection prior to a try-out must be useful to reduce the die spotting time. In this study, drawing process of a front fender is simulated first. and the deflection of the blank holder is calculated from the contact force imposing on th blank holder. The balance block heights ensuring a uniform deflection are optimized by the analysis and design of experiments.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권1호
• /
• pp.19-25
• /
• 2000

This paper describes the sheath induced voltage in underground transmission cable system which will be operated with cable cover protection unit(CCPU). Simulation was carried out to analyze the sheath induced voltage in the real cable system which was installed by 154㎸ CV cable in the case with and without CCPU. The sheath induced voltage will be also analyzed according to the change of grounding method, fault resistance and fault angle. Simulation was performed using EMTP and ATP Draw, the simulation results show whether the CCPU in necessary or not in underground transmission power cable system.

• 소성∙가공
• /
• 제20권5호
• /
• pp.344-349
• /
• 2011

Variation of contact pressure causes change of friction coefficient, which in turn changes stress distribution in the sheet being formed and final springback. In the present study, U-draw bending experiments were carried out under constant blank holding force(BHF) and different blank sizes, and finite element analysis was conducted with and without considering contact pressure effect on friction. When the BHF was sufficiently high, the degree of springback was different between constant blank holding pressure condition and that with varying blank holding pressure. Finite element analysis considering the influence of contact pressure effect on friction could explain the occurrence of springback.

• 한국산업융합학회 논문집
• /
• 제8권3호
• /
• pp.149-154
• /
• 2005

The purpose of this study was to develop the High Functional Stretch Yarns and Woven Fabrics to produce the high value added textile goods and to meet the consumer's needs. For the study 8 yarns and 10 fabrics were made with three develop machine and the thermal-stress properties of the sample were tested and analysed. The result indicated that the sample fabrics kept their stretch performance regardless of conventional process. EDY(elastic DTY) had higher stretch than that of DTY(drawn textured yarn). Especially Macel yarn had higher stretch than that of DTY compared with the same condition of yarn. With time course behavior the elongation of DTY and EDY had stabled tendency without variation. The above results show that wearing sensation and comfort properties of fabrics are changed depending on the end-use. and thus, above results can be used to manufacture of fabrics for specific end-use with high comfort properties.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.252-255
• /
• 2004

Design modification of the stamping die for the upper member of a front end module carrier is carried out in order to improve the feeling qualify of the final product. The small inferiority induced by wrinkling near the wall of the FEM upper member has been inspected after the draw-forming process. The finite element simulation shows that the excess metal is developed by the irregular contact of the blank the tool and it remains after the final stroke. This paper proposes two guidelines for the modification: one is to add the draw-bead; and the other is to modify the tool shape such as the forming shape at the wall. Simulation results show that the proposed guidelines both guarantee the improved feeling quality.

• Journal of Information Technology Applications and Management
• /
• 제26권6호
• /
• pp.13-27
• /
• 2019

Social media are used as a tool which is suitable for delivering various images emotionally in the area of fashion. How deeply consumers are led by the brands to be engaged in the brands' SNS, how often they visit SNS and gain information, how much empathy they elicit from visitors with their contents and how continuously brands provide up-to-date information are the important factors to raise consumers' fashion consciousness and draw out their fashion consumption to express themselves. Therefore, this study aims to explore the effect of social media engagement and contents characteristics on fashion consumption tendency and purchase intention. In order to verify the research question, study makes analysis centering on the 2 × 2 × 2 MANCOVA model to draw out results of the differences among groups. As a result of analysis, this study verifies the difference between the effect of social media engagement on purchase intention and the effect of interaction of three variables on fashion consumption propensity and purchase intention and summarizes the implications.

• 소성∙가공
• /
• 제11권8호
• /
• pp.682-690
• /
• 2002

The formation of adiabatic shearband in tungsten heavy alloys(WHA) was studied in this investigation. Five prismatic specimens were loaded by high velocity impacts and treated as plane strain problems. To find out the effect of particle's volume ratio, specimens containing 81%, 93% and 97% volume percents of tungsten particles were used. Also the effects of particle's geometry and size on the formation of shearband were studied for 81% volume percent alloys by small size particle model, large size particle model and undulated particle models, and the results were discussed.be used to diagnose the causes of necking and fracture in industrial practice and to investigate whether these defects were caused by material property variation, changes in lubrication, or incorrect press settings. In non-axisymmetric deep drawing, three modes of forming regimes are found: draw, stretch, plane strain. The stretch mode for non-axisymmetric deep drawing could be defined when the major and minor strains are positive. The draw mode could be defined when the major strain is positive and minor strain is negative, and plane strain mode could be defined when the major strain is positive and minor strain is zero. Through experiments the draw mode was shown on the wall and flange are one of a drawn cup, while the plane strain and the stretch mode were on the punch head and the punch corner area respectively, We observed that the punch load of elliptical deep drawing was decreased according to increase of die corner radius and the thickness deformation of minor side was more large than major side.

• 대한족부족관절학회지
• /
• 제12권1호
• /
• pp.36-40
• /
• 2008

Purpose: The purpose of this study is to find out the normal results in ankle on varus stress, valgus stress, and anterior draw stress in young men in korea. This would be helpful as the basic data of measuring of ankle instability for operational indication. Materials and Methods: Varus and Valgus stress anteroposterior radiographs and Anterior drawing stress lateral radiographs of 600 normal ankles were reviewed. First, A line parallel was drawn parallel to the articular surface of the distal tibia, and another line was drawn parallel to the articular surface of the talus on anteroposterior radiographs. The interior angle that subtended by these two lines was measured. Second, the reference point is located at the posterior border of the tibia, and the shortest distance from this point to the proximal posterior articular surface of the talus is measured. Results: There were 300 males and 600 ankles. The mean age overall was 21 years (19-22 years) old. The mean length of ankle on anterior draw stress was $5.54{\pm}3.33\;mm$. The mean a interior angle of ankle on varus stress was $0^{\circ}-8.93^{\circ}$, and on valgus stress $0^{\circ}-7.78^{\circ}$. Conclusion: We can consider for operational indication at over the 8.87 mm on anterior draw stress, over the $8.93^{\circ}$ on varus stress, and over the $7.78^{\circ}$ on valgus.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제24권1호
• /
• pp.25-32
• /
• 2018

Purpose: This study was conducted to figure out the cognitive characteristics of the elderly living in apartment complex in order to construct basic data for the design of sustainable and age friendly apartment area. Methods: Cognitive map was used to identify and analyze the elderly residents' status of residential environment cognitions. The elderly living in Gongreung-dong apartment was randomly interviewed outdoor area and requested to draw cognitive maps on their living environment. 26 valid cognitive maps collected were analyzed, classified into two different types: Line type and Dot type. The average age, cognitive distance, length of residence, number of elements in the map(complexity) were then compared by Line and Dot type, as well as by gender. Correlations among variables also were analysed. Results: Males showed a tendency to draw dot types, which means they are place-centered, and females drew line types more than males, which means they are way-centered. The average cognitive distance of male group was greater than that of female group. As the age went up, the number of perceived place and the cognitive distance decreased. Oder people tended to draw line types rather than dot types. As the cognitive distance was longer, the perceived place and the number of lines increased. Implications: The age was more related to the recognition of the residential environment. The younger the residents were, the more they recognized the elements. The points that were represented by dots in the cognitive maps are places for memories for the individuals. Creating more memorable spaces will affect the cognition of residents on living environment. It is better to improve the cognitive environments before cognitive abilities of residents decrease.