• Geomechanics and Engineering
• /
• v.24 no.4
• /
• pp.337-348
• /
• 2021

Brillouin Optical Frequency Domain Analysis (BOFDA) is a distributed fiber optic sensing (DFOS) technique that has unique advantages for performance monitoring of piles. However, the complicated production process and harsh operating environment of offshore PHC pipe piles make it difficult to apply this method to pile load testing. In this study, sensing cables were successfully pre-installed into an offshore PHC pipe pile directly for the first time and the BOFDA technique was used for in-situ monitoring of the pile under axial load. High-resolution strain and internal force distributions along the pile were obtained by the BOFDA sensing system. A finite element analysis incorporating the Degradation and Hardening Hyperbolic Model (DHHM) was carried out to evaluate and predict the performance of the pile, which provides an improved insight into the offshore pile-soil interaction mechanism.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.6
• /
• pp.673-679
• /
• 1998

The experiment was conducted to determine in situ rumen degradability of soybean meal (SM), fish meal (FM), sesame cake (SC) and Italian ryegrass hay (IRGH) and the effect of supplementing the above protein meals to IRGH on digestibility and balance of nutrients in three Saanen goats. For measuring the degradability, nylon bags containing each meal were incubated in the rumen of one fistulated dry cow for 3, 6, 12, 24, 36, and 48 hrs. Degradability revealed that SM protein was highly degradable in the rumen (99.1%), while FM protein was less degradable (76.8%) with SC protein being intermediate (91.2%) at 48 hrs of incubation (p < 0.01). Degradation rate of the potentially degradable fraction was estimated to be 12.12, 5.88 and 5.88%/hr for SM, FM and SC, respectively. In the metabolism trial, all goats were offered daily 900 g IRGH and one of the supplements, SM (100 g), FM (75 g) or SC (100 g). Intake of DM, OM, CP and GE was similar among diets. However, digestibility of OM for SC diet was significantly lower than that for diets supplemented with FM and SM (p < 0.10). Nitrogen (N) excreted in faeces (p < 0.05) and in urine (p < 0.10) was, respectively, higher and lower for SC diet than that for the other two diets. The same tendency was observed in energy losses in faeces (p < 0.10) and in urine (p < 0.05). There was no difference in energy loss in methane or in heat production among diets. Consequently, no significant difference was observed in N retention (2.13, 0.42 and -0.11 g/day for FM, SC and SM diet, respectively) or in energy retention (-1.49, -2.14 and -2.70 MJ/day for FM, SM and SC diet, respectively). These results showed that protein supplements affected the digestion of diets based on grass hay with 7.45% CP in DM in goats, although there was no significant influence on N or energy retention.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.802-806
• /
• 2005

The objective of this study was to determine the effects of processing method and rapeseed variety on ruminal and intestinal protein digestibility of rapeseed meal in steers. Intestinal amino acid digestibility was assessed with an in situ ruminal incubation and precision-fed rooster bioassay. In this experiment one traditional rapeseed meal sample (sample A, prepress extraction) and three double low rapeseed meal samples (sample B, prepress extraction, sample C, screw press and sample D, low temperature press) were placed in polyester bags(8 cm${\times}$12 cm) and suspended in the ventral rumen of steers for 16 h. The residues of in situ incubations were intubated to roosters. Total excreta were collected for 48 h after incubation and then desiccated and amino acid concentrations were determined. Results showed that in ruminal incubation the degradation rate of amino acid and crude protein was higher for traditional rapeseed meal sample A than for double low rapeseed meal sample B, but was much lower than for double low sample C and D. In the group of double low rapeseed meal samples, sample D processed by low temperature press had the highest degradation rate of amino acids in the rumen. For all amino acids, the digestibility of the residual protein as measured by the precision-fed rooster bioassay tended to be lower for sample B than for sample A, which had the same processing method with sample B, and in the group of double low rapeseed meals, sample B had similar digestibility of amino acid in residual protein to sample D and higher than that of sample C. However, although the total amino acid availability involving the digestibility of amino acids in the rumen and rooster bioassay of double low rapeseed meal sample D (low temperature press) was higher than those of the other three samples by 7 to 9 percent, there were no significant differences. Results indicated that processing method markedly affected ruminal and post ruminal amino acid digestibility of rapeseed meal when the temperature exceeded 110$^{\circ}C$. Rapeseed meal that had a high content of fiber was not suitable for dry heat treatment at higher temperatures or the amino acids digestibility in rumen and total availability of amino acids could be reduced. Results also suggested the variety of rapeseed meal had no significant effect on the digestibility and availability of amino acids.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05b
• /
• pp.79-83
• /
• 2001

In order to compare the barrier properties of Ta-N/Si(001) with those of Ta-N/Ta/Si(001), we studied structural properties of films grown by RF magnetron sputtering with various $Ar/N_2$ ratios. To evaluate the barrier properties, the samples were annealed in a vacuum chamber. Ex-situ x-ray scattering measurements were done using an in-house x-ray system. With increasing nitrogen ratio in Ta-N/Si(001), the barrier property of Ta-N/Si(001) was enhanced, finally failed at $750^{\circ}C$ due to the crystallization and silicide formation. Compared with Ta-N/Si(001), Ta-N/Ta/Si(001) forms silicides at $650^{\circ}C$. However it does not crystallize even at $750^{\circ}C$. With increasing nitrogen composition in Ta-N/Ta/Si(001), the formation of tantalum silicide was reduced and the surface roughness was improved. To observe the surface morphology of Ta-N/Ta/Si(001) during annealing, we performed an in-situ x-ray scattering experiment using synchrotron radiation of the 5C2 at Pohang Light Source(PLS). Addition of Ta layer between Ta-N and Si(001) improved the surface morphology and reduced the surface degradation at high temperatures. In addition, increasing $N_2/Ar$ flow ratio reduced the formation of tantalum silicide and enhanced the barrier properties.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.5
• /
• pp.633-637
• /
• 2004

The experiment of silage for preservation of fresh Italian ryegrass (Lolium multiflorum) was carried out to examine whether the fermentation quality and microbial degradation in the rumen can be altered by the treatment of amino acids fermentation byproduct (AFB). The plant was ensiled for 40 days with 4 treatments of different ratios of AFB and sugarcane molasses (SCM) mixture. The treatment 2 (T2, AFB:SCM=100:0) and treatment 3 (T3, AFB:SCM=40:60) silages showed higher (p<0.05) concentrations of lactic acids, lower (p<0.05) pH and dry matter (DM) losses than the Control (T1, none additive) and treatment (T4, AFB:SCM=0:100) silages. The treatments 2 and 3 contained higher (p<0.05) DM and crude protein contents in silages compared to treatments 1 and 4 silages. The NDF, ADF and cellulose contents were also lower (p<0.05) in T2, T3 and T4 silages than T1 silage and fresh material before ensiled. The in situ rumen DM, NDF, ADF, hemicellulose and cellulose degradability was also higher (p<0.05) in T2, T3 and T4 silages than T1 silage, while the highest improvement was achieved with addition of AFB:SCM at level of 40:60 at ensiling. The result in this study indicates that the addition of AFB and SCM additives improved the silage fermentation and cell wall degradability of Italian ryegrass silage.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.4 s.71
• /
• pp.415-423
• /
• 2004

To investigate the long-term corrosion resistance of an uncoated weathering steel, an important outdoor constructional steel material, skyward surfaces of the weathering steel and a control steel initially exposed to rural and industrial atmospheres for 9 years were electrochemically tested in neutral artificial rain in terms of electrochemical potentials, impedances, and anodic potentiodynamic polarization curves. Their results were then discussed. A quite passive and stable rust layer to the artificial rain was well formed on the skyward surface of the weathering steel exposed to the industrial and rural atmospheres, and its corrosion rate in the artificial rain was measured to be about a low $3{{\mu}m}/y$. Continuous immersion of all the weathered surfaces in the artificial rain revealed the gradual degradation of the weathered corrosion layers on the steel, resulting in a cathodically controlled corrosion of the substrate steel by the electrochemical measurements. Alloy components of the weathering steel were found to retard the degradation of the weathered corrosion layers on the steel in the artificial rain. For better corrosion evaluation of the weathering steel, more electrochemical measurements of surfaces that have been exposed for more than 9 years to more closely simulated atmospheric waters are needed. These measurements are almost non-destructive and can provide online and in situ information on the corrosion rate, the development of corrosion and the conditions of rust layers on any interested surface and at any exposure time of the steel, so they can be effectively applicable to the corrosion evaluation of steel structures such as bridges, towers, and architectures by forming an electrochemical cell on an interested structural surface and by using a portable electrochemical instrument.

• Journal of Soil and Groundwater Environment
• /
• v.28 no.1
• /
• pp.15-24
• /
• 2023

A persulfate(PS)/sulfidated microscale zero-valent iron(S-mZVI) system was tested for treating a soil contaminated with phenol. Sulfidation of bare mZVI was conducted using a mechanochemical process utilizing a ball mill in order to improve persulfate activation capacity and stability of unmodified mZVI. The synthesized S-mZVI performed markedly better than the bare mZVI in activating PS. The optimum molar ratio of sulfur to mZVI was around 0.12. In the soil slurry experiments, a very rapid and complete removal of phenol was observed at the optimum molar ratios of PS to S-mZVI of 2:1 and PS to phenol of 16:1. The phenol removal efficiencies decreased as the water content of the slurries decreased. This was believed to be due to increased soil oxidant demand as the amount of soil was increased as relative to the water content. To evaluate the field applicability of the process, slurry experiments adopting high soil contents were carried out that simulated in-situ soil mixing conditions. These experiments resulted in substantially compromised degradation efficiencies of 54.3% and 43.8% within 4 hours. The current study generally shows that the PS/S-mZVI process has a potential to be developed into a remediation technology for soils contaminated with organics.

• Korean Journal of Agricultural Science
• /
• v.39 no.3
• /
• pp.407-412
• /
• 2012

Soil texture has an important influence on agriculture such as crop selection, movement of nutrient and water, soil electrical conductivity, and crop growth. Conventionally, soil texture has been determined in the laboratory using pipette and hydrometer methods requiring significant amount of time, labor, and cost. Recently, in-situ soil texture classification systems using optical diffuse reflectometry or mechanical resistance have been reported, especially for precision agriculture that needs more data than conventional agriculture. This paper is a part of overall research to develop an in-situ soil texture classification system using image processing. Issues investigated in this study were effects of sensor travel speed and light source and intensity on image quality. When travel speed of image sensor increased from 0 to 10 mm/s, travel distance and number of pixel were increased to 3.30 mm and 9.4, respectively. This travel distances were not negligible even at a speed of 2 mm/s (i.e., 0.66 mm and 1.4), and image degradation was significant. Tests for effects of illumination intensity showed that 7 to 11 Lux seemed a good condition minimizing shade and reflection. When soil water content increased, illumination intensity should be greater to compensate decrease in brightness. Results of the paper would be useful for construction, test, and application of the sensor.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.4
• /
• pp.388-395
• /
• 2010

In order to decrease level of an organophosphorus fungicide, tolclofos-methyl, from in situ ginseng cultivating soil, we isolated a tolclofos-methyl degrading bacteria from ginseng cultivating soil samples. The bacterial strain removed tolclofos-methyl around 95% after 3 days incubation with complete liquid media. The strain was identified as Sphingomonas sp. by 16S rDNA sequence comparison, and designated as Sphingomonas sp. 224. Through the GC-MS analysis, Sphingomonas sp. 224 was proposed to have an initiative degradation pathway generating the metabolite such as 2,6-dichloro-4-methyl phenol compound from tolclofos-methyl. In addition, Sphingomonas sp. 224 was confirmed representing the effective degrading capability to tolclofosmethyl in situ soil.

• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.151-157
• /
• 1993

Abstract We have fabricated Y-Ba-Cu-O superconducting thin films by in-situ on-axis rf magnetron sputtering method using $Y_1$B$a_2$C${u_4}\;{_2O_x}$ nonstoichiometric target. Reactive ion etching (RIE) method was used in patterning the films. We have investigated the properties of patterned films, and compared the properties of the films before and after patterning. As the line width of the pattern decreases from 5${\mu}$m to 2${\mu}$m, a slight but not significant degradation in superconducting properties of the patterned films is observed. The bridge patterns are found to have clean edges and good electrical properties enough to be applied in device applications. From the result of this research, the possibility of submicron patterning by RlE is confirmed.