• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1029-1038
• /
• 1993

The microstructures of aluminas, included of dissolved CaO as $\alpha$-alumina seeded pseudo-boehmite hydrosol was gelled in plaster mold and doped of MgO as dipping of calcines(120$0^{\circ}C$-2h) into Mg-nitrate solution, were compared to the one of which additives are excluded during the gellation. It was formed the boundary layer of 300~350${\mu}{\textrm}{m}$ distance from surface to the inside, containing of approximately 500ppm CaO by dissolved Ca from plaster mold. As the MgO addition to the boundary layer with dissolved CaO, the microstructure of the layer was uniformed and inhibited the grian growth, compared to one of that additives be excluded specimen and of MgO doped-inside region. This result was considered as abnormal grain growth and effect of flat boundary formation be appeared by effects of dissolved CaO, were decreased by MgO co-doping.

• 한국주조공학회지
• /
• 제21권1호
• /
• pp.41-47
• /
• 2001

본 연구에서는 FDM법과 CA법을 결합하여 주물의 응고조직성장 예측 프로그램을 개발하였다. 새로운 농도장 분포 알고리즘을 개발하고, 이 결과를 1차원 해석해와 비교하였으며, 이를 2차원 응고조직 및 농도계산에 적용하였다. 3차원 응고조직 예측 해석연구를 통하여 복잡한 형상의 주물에 적용 하였으며, turbine blade형상의 응고조직 시뮬레이션을 통하여 인출속도가 응고조직에 미치는 영향에 대하여 조사하였고, 원하는 주조조업변수를 본 시뮬레이션에 의하여 결정할 수 있으리라 생각된다.

• 한국응용곤충학회지
• /
• 제3권
• /
• pp.27-30
• /
• 1964

저장중의 과맥, 소맥에 미치는 쌀바구미의 영향을 R.H. $75\%,\,28^{\circ}C$하에서 조사하여 다음과 같은 결과를 얻었다. 1. 무곤충구에 있어서는 4주간에 함수량은 연차 감소되어 과맥은 $2.07\%$, 소맥은 $1.29\%$의 감소를 보였다. 2. 100-200두구에서는 4주간에 과맥은 $6.29\%$ 감, $0.79\%$증, 소맥에서는$0,84\%$감, $0.13\%$ 감을 나타내었다. 3. 함수량의 증감은 곡물의 종류여하를 막론하고 동일한 경향을 나타내며 시간이나 집단의 크기에 다라 밀접한 관계가 있었다. 4. 100두구에 있어서는 제3주까지 감소하였다. 제4주에 증가하였으며 200두구에 있어서는 제2주까지 감소하고 제3-4주에 증가하였고 제5주에 우화성충을 제거하는 데 따라 감소하였다. 5. 제2주의 함수량의 감소는 1-2령유충의 생리적활동이 적은데 인한 것이며 100두구에 있어서 제3주까지 함수량이 감소하는 것은 2-3령유충까지도 밀도가 g당 3두 이사일때는 탈수량을 보상하지 못하기 때문이라고 생각된다. 6. 미생물의 수는 제4주까지 지수함수적증가를 나타내며 집단의 크기에 따라 증가율에 큰 차가 있었다. 7. 미생물의 종류는 곡물에 따라 별무차였으며, A. restrictus, A. versicolor가 가장 많았고, A. candidus가 다음으로 많았다.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.39-48
• /
• 2005

As the industrial development is accelerated, a new machining process and system are keenly required to achieve super precision surface finish. Especially to get ground surface finish fer complicated and narrow inner shape of molds, it is impossible with the existing methods so that a new method is being required to be developed. A new material, called Magic(MAGnetic Intelligent Compounds), is finally made and it is called Magic machining that uses this material. There is a way to make a material as follows, the mixture of magnetic particles, bonding material and particles of abrasive grain should be melt down by proper heat, and then this mixture put in a mold and cool down in magnetic field which has a uniform direction. This new polishing method is spotlighted as an excellent solution to the existing problems. However it hasn't reported any study about the influence of the machining conditions of polishing velocity, amplitude and polishing pressure to the surface roughness yet. This study would examine closely the influence of polishing conditions of the Magic polishing tool to the surface finish to decide the optimum polishing condition and to standardize the Magic polishing work.

• 한국산학기술학회논문지
• /
• 제20권7호
• /
• pp.607-612
• /
• 2019

크래시패드의 소프트감은 차량 실내의 고급감에 영향을 미치는 중요한 요소 중 하나이다. 그리고 실내 크래시패드의 소프트감을 향상시키면서 동시에 제조 및 생산 비용의 절감을 위한 다양한 연구들이 진행되고 있다. 크래시패드의 PU 발포 공정은 부품공정, 공정장비 및 다양한 재료의 특성에 대한 이해를 기초로 진행된다. 그러므로 차량 내장 부품의 외관 상품성에 대한 고객 요구조건을 만족하기 위해서 부품공정, 공정장비, 재료선정과 컴퓨터 응용 해석기술을 활용한 통합적인 설계 기법이 활용되었다. 본 연구에서는 스킨성형 방법과 기재의 플라스틱 사출성형 방법 그리고 공정 축소를 고려한 발포 공정을 통합한 기술인 IMG 발포일체성형 공법을 세계 최초로 개발하였다. 본 기술 적용을 통하여 크래시패드 표면 소프트감이 기존 진공성형 공법 대비 40% 향상 효과를 볼 수 있었고, 사출 공정과 제조 공정을 통합하여 기존 공정을 50% 축소할 수 있었다. 또한 사출 금형과 스킨 금형을 통합하고 발포 금형을 삭제하여 금형수도 3개에서 1개로 줄임으로 중형 승용차 적용 기준 원가 20% 절감 효과를 얻을 수 있었다.

• 한국주조공학회지
• /
• 제22권3호
• /
• pp.109-113
• /
• 2002

A good fluidity of high strength Al-alloys is required to cast thin wall castings needed to reduce the weight of cast parts. The fluidity, measured as the length to which the metal flows in a standard channel, is affected by many factors, such as the pouring temperature, solidification type of the alloy, the channel thickness, melt head, mold materials and temperature, coating etc. Therefore the experimentally measured fluidity scatters very much and makes it difficult to estimate the fluidity of a melt with a few measurements. The effect of Ti content and grain refinement on the fluidity of high strength aluminum alloy was investigated with a test casting with 8 thin flow channels to reduce the scattering of the fluidity results. The fluidity of Al-4.8%Cu-0.6%Mn Al-6.2%Zn-1.6%Mg-1.0%Cu and well-known commercial aluminum alloy, A356 was tested. Initial content of Ti was varied from 0 to 0.2wt% and Al-5Ti-B master alloy was added for grain refinement. The flow length varied linearly with superheat. By adding Ti and Al-5Ti-B, the fluidity increased. The grain size decreased by adding grain refiner at the same time. The fluidity depended on the degree of grain refinement. The fluidity of the alloy solidifying in mushy type is improved by grain refinement, because grain refinement increases the solid fraction at the time of flow stoppage.

• Design & Manufacturing
• /
• 제2권4호
• /
• pp.44-47
• /
• 2008

The magnetic polishing is the useful method to finish some machinery fabrications by using magnetic power. This method is one of the precision techniques and has an aim for clean technology in the transportation of the pure gas in the clean pipes. The magnetic abrasive polishing method is not so common in the field of machine that it is not known to widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. Therefore, in this paper we deals with the development of the magnetic abrasive with the use of Sr-Ferrite. In this development, abrasive grain A has been made by using the resin bond fabricated at low temperature. And magnetic abrasive powder was fabricated from the Sr-Ferrite which was crushed into 200 mesh. The XRD analysis result shows that only A abrasive and Sr-Ferrite crystal peaks were detected, explaining that resin bond was not any more to contribute chemical reaction. From SEM analysis, we found that A abrasive and Sr-Ferrite were strongly bonding with each other.

• 한국주조공학회지
• /
• 제29권5호
• /
• pp.198-203
• /
• 2009

In order to manufacture copper ultra fine wire used for bonding wire in integrated circuit package, continuous casting process, which can produce high purity copper rod with small cross section, and wiredrawing process have to be optimized to prevent wire brakeage during entire manufacturing process of fine wire. The optimum condition for producing copper rod with mirror surface has to established by investigation of the effects of several parameters such as withdrawal speed, superheat and rod diameter on grain morphology of the cast rod and on its drawing characteristics to fine wire. The purpose of this study is to propose the optimized process parameters in continuous casting process in order to produce cast rod without internal defects, and to predict microstructure orientation suitable for wire drawing process.

• 한국재료학회지
• /
• 제8권9호
• /
• pp.819-824
• /
• 1998

합금의 주조시 냉각속도가 $\textrm{Nd}_{16}\textrm{Fe}_{72}\textrm{V}_{4}\textrm{B}_{8}$ 소결자석의 결정립 분포와 착자특성에 미치는 영향에 대하여 조사하였다. 냉각속도가 높은 Cu mold를 사용하여 제작한 시료는 좁은 결정립 분포와 착자특성의 향상을 보였다. B화합물을 생성하는 Cr, Mn, Nb 그리고 w과 같은 첨가원소가 Nd-Fe-B계 소결자석의 착자특성에 미치는 영향에 대해서도 조사하였다. Cr이나 W첨가는 보자력의 향상에 효과적이고 $\textrm{Nd}_{16}\textrm{Fe}_{72}\textrm{Cr}_{4}\textrm{B}_{9}$합금은 $\textrm{Nd}_{16}\textrm{Fe}_{72}\textrm{V}_{4}\textrm{B}_{8}$합금과 비슷한 착자특성을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.73-76
• /
• 2004

High-temperature Superconductor(HTS) tubes were fabricated in term of different processing variables such as preheating temperature, speed of mold rotation and cooling rate by centrifugal forming method. For powder melting by induction the optimum range of melting temperatures and preheating temperature were $1050^{\circ}C{\sim}1100^{\circ}C$ and $550^{\circ}C$ for 30min, respectively. The mould roating speed was 1000rpm. A tube was annealed at $840^{\circ}C$ for 72hours in oxygen atmosphere. The plate-like grains were well developed along the roating direction and typical grain size was about more than $40{\mu}m$. It was found that Ic values increased with increasing the preheating temperature and speed of mold rotation. While Ic decreased with increasing the cooling rate. The measured Ic in $50mm{\times}70mm{\times}2.5mm$ tube was about 896Amp.