• Structural Engineering and Mechanics
• /
• v.38 no.4
• /
• pp.479-501
• /
• 2011

Even though fiber reinforced polymer (FRP) has been widely used as a retrofitting material, the FRP behavior and effect in FRP retrofitted structure under blast loading, impulsive loading with instantaneous time duration, has not been accurately examined. The past studies have focused on the performance of FRP retrofitted structures by making simplifications in modeling, without incorporating accurate failure mechanisms of FRP. Therefore, it is critical to establish an analytical model that can properly consider the specific features of FRP material in evaluating the response of retrofitted concrete structures under blast loading. In this study, debonding failure analysis technique for FRP retrofitted concrete structure under blast loading is suggested by considering FRP material characteristics and debonding failure mechanisms as well as rate dependent failure mechanism based on a blast resisting design concept. In addition, blast simulation of FRP retrofitted RC panel is performed to validate the proposed model and analysis method. For validation of the proposed model and analysis method, the reported experimental results are compared with the debonding failure analysis results. From the comparative verification, it is confirmed that the proposed analytical model considering debonding failure of FRP is able to reasonably predict the behavior of FRP retrofitted concrete panel under blast loading.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.3
• /
• pp.239-245
• /
• 2017

As a new technical approach, wave energy converter by using vertical motion of water in the multiple water chambers were developed to realize actual wave power generation as eco-environmental renewable energy. And practical use of wave energy converter was actually to require the following conditions: (1) setting up of the relevant device and its application to wave power generation in case that severe wave loading is avoided; (2) workability in installation and maintenance operations; (3) high energy conversion potential; and (4) low cost. In this system, neither the wall(s) of the chambers nor the energy conversion device(s) are exposed to the impulsive load due to water wave. Also since this system is profitable when set along the jetty or along a long floating body, installation and maintenance are done without difficulty and the cost is reduced. In this paper, we describe the system which consists of a float, a shaft connected with another shaft, a rack and pinion arrangement, a ratchet mechanism, and rotary type generator(s). Then, we present the dynamics model for evaluating the output electric power, and the results of numerical calculation including the effect of the phase shift of up/down motion of the water in the array of water chambers aligned along the direction of wave propagation.

• Structural Engineering and Mechanics
• /
• v.13 no.6
• /
• pp.615-638
• /
• 2002

This paper presents a method of seismic analysis for a cylindrical liquid storage structure considering the effects of the interior fluid and exterior soil medium in the frequency domain. The horizontal and rocking motions of the structure are included in this study. The fluid motion is expressed in terms of analytical velocity potential functions, which can be obtained by solving the boundary value problem including the deformed configuration of the structure as well as the sloshing behavior of the fluid. The effect of the fluid is included in the equation of motion as the impulsive added mass and the frequency-dependent convective added mass along the nodes on the wetted boundary of the structure. The structure and the near-field soil medium are represented using the axisymmetric finite elements, while the far-field soil is modeled using dynamic infinite elements. The present method can be applied to the structure embedded in ground as well as on ground, since it models both the soil medium and the structure directly. For the purpose of verification, earthquake response analyses are performed on several cases of liquid tanks on a rigid ground and on a homogeneous elastic half-space. Comparison of the present results with those by other methods shows good agreement. Finally, an application example of a reinforced concrete tank on a horizontally layered soil with a rigid bedrock is presented to demonstrate the importance of the soil-structure interaction effects in the seismic analysis for large liquid storage tanks.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1409-1416
• /
• 2010

It is essential to predict a blasting-induced excavation damage zone (EDZ) beyond the proposed excavation line of a tunnel because the unwanted damage area requires extra support system for tunnel safety. Complicated blasting process which may hinder a proper characterization of the damage zone can be effectively represented by two loading mechanisms. The one is a dynamic impulsive load generating stress waves outwards immediately after detonation. The other is a gas pressure that remains for a relatively long time. Since the gas pressure reopens up the arrested cracks and continues to extend some cracks, it contributes to the final formation of EDZ induced by blasting. This paper presents the simple method to evaluate EDZ induced by gas pressure during blasting in rock. The EDZ is characterized by analyzing crack propagation from the blasthole. To do this, a model of the blasthole with a number of radial cracks of equal length in an infinite elastic plane is considered. In this model, the crack propagation is simulated by using three conditions, the crack propagation criterion, the mass conservation of the gas, and the adiabatic condition. As a result, the stress intensity factor of the crack generally decreases as crack propagates from the blasthole so that the length of the crack is determined. In addition, the effect of rock properties, initial number of cracks, and the adiabatic exponent are investigated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.681-688
• /
• 2009

This paper deals with a bearing faults localization technique based on holographic approach by visualizing sound radiated from the faults. The main idea stems from the phenomenon that bearing faults in a moving vehicle generate impulsive sound. To visualize fault signal from the moving vehicle, we can use the moving frame acoustic holography [H.-S. Kwon and Y.-H. Kim, "Moving frame technique for planar acoustic holography," J. Acoust. Soc. Am. 103(4), 1734-1741, 1998]. However, it is not easy to localize faults only by applying the method. This is because the microphone array measures noise (for example, noise from other parts of the vehicle and the wind noise) as well as the fault signal while the vehicle passes by the array. To reduce the effect of noise, we propose two ideas which utilize the characteristics of fault signal. The first one is to average holograms for several frequencies to reduce the random noise. The second one is to apply the partial field decomposition algorithm [K.-U. Nam, Y.-H. Kim, "A partial field decomposition algorithm and its examples for near-field acoustic holography," J. of Acoust. Soc. Am. 116(1), 172-185, 2004] to the moving source, which can separate the fault signal and noise. Basic theory of those methods is introduced and how they can be applied to localize bearing faults is demonstrated. Experimental results via a miniature vehicle showed how well the proposed method finds out the location of source in practice.

• Fashion & Textile Research Journal
• /
• v.19 no.4
• /
• pp.448-467
• /
• 2017

Attention to living lifestyle shops covering with the wide product range including household items, interior decoration, and bedding have recently increased since consumers have been improving their standard of living and income levels and they are getting more interested in up-to-date trends of global living lifestyles. The purpose of this study is first, to analyze the market situation of living lifestyle shops using the case study method and second, to investigate consumer's store usage behavior, product purchase motives, and attitudes to the living lifestyle shops using the empirical study method. For an empirical study, the survey was conducted with 20s to 50s female respondents who have visited living lifestyle shops and a total of 227 responses were analyzed using SPSS 18.0. The results of this study were as follows. The most frequently visit store was MUJI and most of respondents tended to visit the store once a month and their interest and purchase items were household items. Only impulsive purchase motives among other motives of living lifestyle shops, such as others-oriented, situational, and reasonable motives, significantly had a positive effect on store attitudes toward living lifestyle shops. There were differences in purchasing items at living lifestyle shops depending on marriage status and occupation. Purchase motives of living lifestyle products were statistically influenced by demographic factors such as age, marriage status and income level, however store attitudes were not. The managerial implications for living lifestyle shops are discussed limitations and areas for future research as well.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.1
• /
• pp.34-39
• /
• 2009

As a subjective recognition effect, human's emotion has impulsive characteristic and it expresses intentions and needs unconsciously. These are pregnant with information of the context about the ubiquitous computing environment or intelligent robot systems users. Such indicators which can aware the user's emotion are facial image, voice signal, biological signal spectrum and so on. In this paper, we generate the each result of facial and voice emotion recognition by using facial image and voice for the increasing convenience and efficiency of the emotion recognition. Also, we extract the feature which is the best fit information based on image and sound to upgrade emotion recognition rate and implement Multi-Modal Emotion recognition system based on feature fusion. Eventually, we propose the possibility of the ubiquitous computing service reasoning method based on Bayesian Network and ubiquitous context scenario in the ubiquitous computing environment by using result of emotion recognition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.641-655
• /
• 1992

In this paper, the performance of the various multiple accesstechniques for the mobile computer network has been studied in the consideration of the characteristics. Of the mobile communication channel. In the case of the hidden node occurring, it could be seen that the performance of the code division multiple access(CDMA) technique. With simultaneous access function is better than that of the other packet access methods such as carrier sensed multiple access(CAMA). Busy tone mulitiple access(BTMA)and idle signal muitiple access(ISMA) in the view of the throuhtput and mean delay time. Also it has been shown that the performance of the CDMA method is superior to that of other packet access techniques such as multiple access(CSMA).etc when the fading effect or impulsive noise exists in the mobile channel. Especially in the case of the distributed mobile network. It has been shown that the receiver-transmitter based CDMA method using the characteristics of CDMA effectively has better throughput and less mean delay time than the commontransmitter based CDMA technique.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.2
• /
• pp.1-15
• /
• 2021

The purposes of this study was to investigate the effects of materialism value on the clothing shopping orientation and impulse buying behaviors of Chinese female consumers. The subjects were 417 female millennials in Gillim-province, China. The research method was a survey, and the questionnaire consisted of questions to ascertain materialism value, clothing shopping orientation, impulse buying behaviors, and the subjects' demographic characteristics. For data analysis, descriptive statistics, Cronbach's α, factor analysis, and regression analysis were performed. The results of this study were as follows: First, materialism value was derived with 3 factors (happiness pursuit, possession-oriented, and success judgement). Second, the clothing shopping orientation was derived with 5 factors (trend pursuit, pleasure pursuit, brand pursuit, economic pursuit, and convenience pursuit). Third, the impulse buying behavior was derived with 4 factors (pure, planned, reminder, and implicit impulse buying). Forth, materialism value had significant effects on clothing shopping orientation. The higher the value of materialism, the more the brand pursuit, pleasure pursuit, and trend pursuit shopping orientation increased, while the economic pursuit and convenience pursuit shopping orientation decreased. Fifth, materialism value had significant effect on pure and planned impulse buying behaviors. As the value of materialism increased, pure and planned impulsive buying behaviors increased. This study suggested that materialism value is an effective variable to understand the clothing shopping orientation and clothing impulse buying behavior.

• Structural Engineering and Mechanics
• /
• v.77 no.4
• /
• pp.441-461
• /
• 2021

Reinforced concrete (RC) columns are crucial in building structures and they are of higher vulnerability to terrorist threat than any other structural elements. Thus it is of great interest and necessity to achieve a comprehensive understanding of the possible responses of RC columns when exposed to high intensive blast loads. The primary objective of this study is to derive analytical formulas to assess vulnerability of RC columns using an advanced numerical modelling approach. This investigation is necessary as the effect of blast loads would be minimal to the RC structure if the explosive charge is located at the safe standoff distance from the main columns in the building and therefore minimizes the chance of disastrous collapse of the RC columns. In the current research, finite element model is developed for RC columns using LS-DYNA program that includes a comprehensive discussion of the material models, element formulation, boundary condition and loading methods. Numerical model is validated to aid in the study of RC column testing against the explosion field test results. Residual capacity of RC column is selected as damage criteria. Intensive investigations using Arbitrary Lagrangian Eulerian (ALE) methodology are then implemented to evaluate the influence of scaled distance, column dimension, concrete and steel reinforcement properties and axial load index on the vulnerability of RC columns. The generated empirical formulae can be used by the designers to predict a damage degree of new column design when consider explosive loads. With an extensive knowledge on the vulnerability assessment of RC structures under blast explosion, advancement to the convention design of structural elements can be achieved to improve the column survivability, while reducing the lethality of explosive attack and in turn providing a safer environment for the public.