Browse > Article
http://dx.doi.org/10.12989/sem.2011.38.4.479

Debonding failure analysis of FRP-retrofitted concrete panel under blast loading  

Kim, Ho Jin (Civil Engineering Research Institute, ATMACS Co. Ltd.)
Yi, Na Hyun (School of Civil and Environmental Engineering, Yonsei University, Concrete Structural Engineering Laboratory)
Kim, Sung Bae (School of Civil and Environmental Engineering, Yonsei University, Concrete Structural Engineering Laboratory)
Nam, Jin Won (Department of Civil & Environmental Engineering, Southern University)
Ha, Ju Hyung (School of Civil and Environmental Engineering, Yonsei University, Concrete Structural Engineering Laboratory)
Kim, Jang-Ho Jay (School of Civil and Environmental Engineering, Yonsei University, Concrete Structural Engineering Laboratory)
Publication Information
Structural Engineering and Mechanics / v.38, no.4, 2011 , pp. 479-501 More about this Journal
Abstract
Even though fiber reinforced polymer (FRP) has been widely used as a retrofitting material, the FRP behavior and effect in FRP retrofitted structure under blast loading, impulsive loading with instantaneous time duration, has not been accurately examined. The past studies have focused on the performance of FRP retrofitted structures by making simplifications in modeling, without incorporating accurate failure mechanisms of FRP. Therefore, it is critical to establish an analytical model that can properly consider the specific features of FRP material in evaluating the response of retrofitted concrete structures under blast loading. In this study, debonding failure analysis technique for FRP retrofitted concrete structure under blast loading is suggested by considering FRP material characteristics and debonding failure mechanisms as well as rate dependent failure mechanism based on a blast resisting design concept. In addition, blast simulation of FRP retrofitted RC panel is performed to validate the proposed model and analysis method. For validation of the proposed model and analysis method, the reported experimental results are compared with the debonding failure analysis results. From the comparative verification, it is confirmed that the proposed analytical model considering debonding failure of FRP is able to reasonably predict the behavior of FRP retrofitted concrete panel under blast loading.
Keywords
fiber reinforced polymer; KFRP; AFRP; GFRP; CFRP; retrofitting material; blast load; failure mechanism; rate dependent; debonding failure;
Citations & Related Records
Times Cited By KSCI : 20  (Citation Analysis)
Times Cited By Web Of Science : 0  (Related Records In Web of Science)
Times Cited By SCOPUS : 1
연도 인용수 순위
1 Landry, K.A. (2003), "The blast resistance of unreinforced, ungrouted, one-way, concrete masonry unit walls", Thesis of Doctor of Philosophy, Rensselaer Polytechnic Institute Troy, New York, USA.
2 Lenwari, A., Thepchatri, T. and Watanabe, E. (2002), "Prediction of premature separation of bonded CFRP plates from strengthened steel beams using a fracture criterion", Struct. Eng. Mech., 14(5), 565-574.   DOI
3 Li, G.Q., Yang, T.C. and Chen, S.W. (2009), "Behavior and simplified analysis of steel-concrete composite beams subjected to localized blast loading", Struct. Eng. Mech., 32(2), 337-350.   DOI
4 Lorenzis, L.D. and Tegola, A.L. (2005), "Bond of FRP laminates to concrete under impulse loading : A simple model", Proceedings of the International Symposium on Bond Behaviour of FRP in Structures (BBFS 2005), Hong Kong, December.
5 Lu, Y. (2009), "Modelling of concrete structures subjected to shock and blast loading: An overview and some recent studies", Struct. Eng. Mech., 32(2), 235-249.   DOI
6 Mahini, S.S. and Ronagh, H.R. (2009), "Numerical modelling of FRP strengthened RC beam-column joints", Struct. Eng. Mech., 32(6), 649-665.   DOI
7 Malvar, L.J., Crawford, J.E., Wesevich, J.W. and Simons, D. (1997), "A plasticity concrete material model for DYNA3D", Int. J. Impact Eng., 19(9-10), 847-873.   DOI   ScienceOn
8 Malvar, L.J., Morrill, K.B. and Crawford, J.E. (2004), "Numerical modeling of concrete confined by fiber reinforced composites", J. Compos. Constr., 8(4), 315-322.   DOI   ScienceOn
9 Matta, F., Karbhari V.M. and Vitaliania, R. (2005), "Tensile response of steel/CFRP adhesive bonds for the rehabilitation of civil structures", Struct. Eng. Mech., 20(5), 589-608.   DOI
10 Morrill, K.B., Malvar, L.J., Crawford, J.E., Hegemier, G. and Seible, F. (2001), "Full-scale testing of reinforced concrete column retrofits to resist blast loads", Proceedings of 10th International Symposium on Interaction of the Effects of Munitions with Structures, Defense Threat Reduction Agency, San Diego.
11 Nam J.W., Kim, H.J., Yi, N.H., Kim, I.S., Kim, J.H.J. and Choi, H.J. (2009), "Blast analysis of concrete arch structures for FRP retrofitting design", Comput. Concrete, 6(4), 305-318.   DOI
12 Nam, J.W., Kim, H.J. Kim, S.B., Yi, N.H. and Kim, J.H.J. (2010), "Numerical evaluation of the retrofit effectiveness for GFRP retrofitted concrete slab subjected to blast pressure", Compos. Struct., 92(5), 1212-1222.   DOI   ScienceOn
13 Nam, J.W., Kim, H.J., Kim, S.B., Kim, J.H.J. and Byun, K.J. (2009), "Analytical study of finite element models for FRP retrofitted concrete structure under blast loads", Int. J. Damage Mech., 18(5), 461-490.   DOI   ScienceOn
14 Ngo, T. and Mendis, P. (2009), "Modelling the dynamic response and failure modes of reinforced concrete structures subjected to blast and impact loading", Struct. Eng. Mech., 32(2), 269-282.   DOI
15 Pandey, A.K. (2010), "Damage prediction of RC containment shell under impact and blast loading", Struct. Eng. Mech., 36(6), 729-744.   DOI
16 Park, H. (2003), "A nonlinear solid shell element formulation for analysis of composite panels under blast wave pressure loading", Thesis of Doctor of Philosophy, University of Maryland, Maryland, USA.
17 Park, H., Lee, K., Lee, S.W. and Kim, K. (2006), "Dynamic analysis of nonlinear composite structures under pressure wave loading", J. Compos. Mater., 40(15), 1361-1383.   DOI
18 Pham, D.H. (2002), Finite Element Study of a Composite Tube under Impact Load, SAE 2002 World Congress Technical Paper 2002-01-0723, Detroit, Michigan, March.
19 Razaqpur, A.G., Tolba, A. and Contestabile, E. (2007), "Blast loading response of reinforced concrete panels reinforced with externally bonded GFRP laminates", Compos. Part B-Eng., 38(5-6), 535-546.   DOI   ScienceOn
20 Shi, Y., Li, Z.X. and Hao, H. (2009), "Bond slip modelling and its effect on numerical analysis of blast-induced responses of RC columns", Struct. Eng. Mech., 32(2), 251-267.   DOI
21 Swanson, S.R. (1997), Advanced Composite Materials, Prentice-Hill, Upper Saddle River, New Jersey.
22 Al-Hassini, S.T.S. and Kaddour, A.S. (1998), "Strain rate effect on GRP, KRP and CFRP composite laminates", Key Eng. Mat., 141-143(Pt2), 427-452.   DOI
23 Al-Salehi, F.A.R., Al-Hassani, S.T.S. and Hinton, M.J. (1989), "An experimental investigation into the strength of angle ply GRP tubes under high rate of loading", J. Comput. Mat., 23(3) 288-305.   DOI   ScienceOn
24 Buchan, P.A. and Chen, J.F. (2007), "Blast resistance of FRP composite and polymer strengthened concrete and masonry structures-A State-of-the-Art Review", Compos. Part B-Eng., 38(5-6), 509-522.   DOI   ScienceOn
25 Chang, F.K. and Chang, K.Y. (1987), "A progressive damage model for laminated composite containing stress concentration", J. Compos. Mater., 21(9), 834-855.   DOI   ScienceOn
26 Chen, J.F. and Teng, J.G. (2001), "Anchorage strength models for FRP and steel plates bonded to concrete", J. Struct. Eng.-ASCE, 127(7), 784-791.   DOI   ScienceOn
27 Cho, J.U. (2009), "Evaluation of critical impact energy on aluminum foam using numerical and experimental analysis", Proceeding of Computational Design in Engineering (CODE 2009), Seoul, Korea, November.
28 Dai, J., Harries, K.A. and Yokota, H. (2008), "A critical steel yielding length model for predicting intermediate crack-induced debonding in FRP strengthened RC members", Steel Compos. Struct., 8(6), 457-473.   DOI
29 Dai, J.G., Harries, K.A. and Yokota, H. (2008), "A critical steel yielding length model for predicting intermediate crack-induced debonding in FRP-strengthened RC members", Steel Compos. Struct., 8(6), 457-473.   DOI
30 Dancygier, A.N. (2009), "Characteristics of high performance reinforced concrete barriers that resist nondeforming projectile impact", Struct. Eng. Mech., 32(5), 685-699.   DOI
31 Valipour, H.B., Huynh, L. and Foster, S.J. (2009), "Analysis of RC beams subjected to shock loading using a modified fibre element formulation", Comput. Concrete, 6(5), 377-390.   DOI
32 Takashi, H. (2009), "Analysis and design of FRP dome structure", Proceeding of Computational Design in Engineering (CODE 2009), Seoul, Korea, November.
33 Thiruppukuzhi, S.V. and Sun, C.T. (2001), "Models for the strain-rate dependent behavior of polymer composites", Comp. Sci. Tech., 61, 1-12.   DOI   ScienceOn
34 Tolba, A. (2001), Response of FRP-Retrofitted Reinforced Concrete Panels to Blast Loading, Thesis of Doctor of Philosophy, Department of Civil and Environmental Engineering, Carleton University, Ottawa, Canada, December.
35 Yi, N.H., Lee, J.G., Kim, S.B., Kim, J.H.J. and Kim, H.J. (2009), "Blast analysis of FRP-retrofitted concrete slab considering rate-dependent failure", Proceeding of Computational Design in Engineering (CODE 2009), Seoul, Korea, November.
36 Yuan, H., Teng, J.G., Seracino, R., Wu, Z.S. and Yao, J. (2004), "Full-range behavior of FRP-to-concrete bonded joints", Eng. Struct., 26(5), 553-564.   DOI   ScienceOn
37 Yuan, H., Wu, Z.S. and Yoshizawa, H. (2001), "Theoretical solutions on interfacial stress transfer of externally bonded steel/composite laminates", J. Struct. Mech. Earthq. Eng.-JSCE, 38(1), 27-39.
38 Yun, G.J., Harmon, T.G., Dyke, S.J. and So, M. (2008), "A total strain-based hysteretic material model for reinforced concrete structures: theory and verifications", Comput. Concrete, 5(3), 217-241.   DOI
39 Zhou, X.T., Ko, J.M. and Ni, Y.Q. (2007), "Experimental study on identification of stiffness change in a concrete frame experiencing damage and retrofit", Struct. Eng. Mech., 25(1), 39-52.   DOI
40 Davidson, J.S., Fisher, J.W., Hammons, M.I., Porter, J.R. and Dinan, R.J. (2005), "Failure mechanisms of polymer-reinforced concrete masonry walls subjected to blast", J. Struct. Eng.-ASCE, 131(8), 1194-1205.   DOI   ScienceOn
41 Dogan, A.B. and Anil, O. (2010), "Nonlinear finite element analysis of effective CFRP bonding length and strain distribution along concrete-CFRP interface", Comput. Concrete, 7(5), 437-453.   DOI
42 Gibson, R.F. (1994), Principles of Composite Material Mechanics, McGraw-Hill, New York.
43 Gong, S.F., Lu, Y., Tu, Z. and Jin, W. (2009), "Validation study on numerical simulation of RC response to close-in blast with a fully coupled model", Struct. Eng. Mech., 32(2), 269-282.   DOI
44 Guzas, E.L. and Earls, C.J. (2010), "Air blast load generation for simulating structural response", Steel Compos. Struct., 10(5), 429-455.   DOI
45 Hashin, Z. (1980), "Failure criteria for unidirectional fiber composite", ASME J. Appl. Mech., 47(2), 329-334.   DOI
46 Kim, K. and Fries, J. (2002), "Blast response of glass-fiber composite plates with progressive material damage model", Proceedings of the 73rd Shock and Vibration Symposium, Newport, Rhode Island, November.
47 Kollar, L.P. and Springer, G.S. (2002), Mechanics of Composite Structures, Cambridge University Press, UK.
48 Kotsovos, M.D., Pavlovic, M.N. and Cotsovos, D.M. (2008), "Characteristic features of concrete behaviour: Implications for the development of an engineering finite-element tool", Comput. Concrete, 5(3), 243-260.   DOI
49 Kumar, S. (2010), "Analysis of impact response and damage in laminated composite cylindrical shells undergoing large deformations", Struct. Eng. Mech., 35(3), 349-364.   DOI
50 Kusumaningrum, P. and Ong, K.C.G. (2009), "Performance of RC columns retrofitted with hybrid-fiber ECC subjected to blast loading", Proceeding of Computational Design in Engineering (CODE 2009), Seoul, Korea, November.