• 지구물리와물리탐사
• /
• 제16권1호
• /
• pp.45-52
• /
• 2013

본 연구에서는 판상 구조물의 비파괴시험을 위한 충격응답시험기 및 운용 소프트웨어를 개발하였으며, 콘크리트 또는 아스팔트로 포장된 인도에서 충격응답 자료 취득 시험을 실시하였다. 현장 자료 취득 시험에서 개발된 시스템은 안정적으로 신속하게 충격응답반응을 측정하였다. 현장 시험 결과, 포장재 특성에 따라 동적강성, 평균운동성 등의 절대 값이 크게 변화 하였다. 또한 일부 구간에서는 포장재 또는 하부 지반의 변화를 반영하는 것으로 판단되는 값의 변화가 측정되었다. 본 연구를 통해 만들어진 시스템은 판상구조물의 상태에 대한 정보를 쉽고 빠르게 획득할 수 있을 것으로 판단된다. 본 연구에서 개발된 장비를 이용하여 조사 대상물에 대한 2차원 측정과 모니터링을 한다면, 구조물의 유지 보수에 유용한 정보를 얻을 수 있을 것으로 기대된다.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.283-288
• /
• 1996

This paper presents the development technology of standard shielded resistor divider for full lightning impulse voltage. The ability of large-capacity power apparatus to withstand lighting stroke is usually evaluated by means of full lightning impulse voltage. Lightning impulse voltage test has been essential to evaluate the insulation performance of electrical power apparatus. Recently international standard (IEC 60) on high voltage measurement techniques is being revised and requests a formal traceability of high voltage measurements. Therefore, general interest for this area has grown considerably during last years, and several international intercomparisons have already completed worldwide, i.e. Europe, Japan, America etc., In this viewpoint, we have also investigated the step response of the standard shielded resistor divider, which satisfies the IEC recommendation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1445_1446
• /
• 2009

This paper represents the step response characteristics of shunts for impulse current. This work is aimed at the development of the reference measuring system(RMS) for impulse current rated 10 kA at 1/$20{\mu}s$, 100 kA at 4/$10{\mu}s$, 20 kA at 8/$20{\mu}s$, 40 kA at 30/$80{\mu}s$. According to the IEC 60060-2, the step response characteristics was assessed. As results of the test, the step response characteristics of newly developed shunts for impulse current satisfied requirements of RMS.

• 한국소음진동공학회논문집
• /
• 제12권10호
• /
• pp.792-798
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function (FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. Since the response signals generated by the impact hammer are transient and have damping, they are undoubtedly non-periodic. It is inevitable that the signals be acquired for limited recording time, which causes the finite record length error and the leakage error. In this paper, the errors in the frequency response function of multi degree of freedom system are formulated theoretically. And the method to remove these errors is also suggested. This method is based on the optimization technique. A numerical example of 3-dof model shows the validity of the proposed method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.363.2-363
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function(FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.71-77
• /
• 2002

The spectrum of impulse response signal which is obtained from an impulse hammer testing is used for frequency response function, nevertheless it has serious faults when the record length for the signal processing is not very long. The faults cannot be avoided with the conventional signal analyzer that is processing all the signals as if they are always periodic. The signals generated by the impact hammer are undoubtedly non-periodic because of the damping, and are acquired for limited recording time due to the memory as well as the computation performance of the signal analyzer. This paper will make clear the relation between the faults and the length of recording time, and propose the way for solving the faults.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.714-720
• /
• 2008

This research presents a laboratory study about an subjective response of impulsive sound caused by leisure shooting. The sources are sampled from outdoor noise and their levels range from 40 to 75 dB at the interval of 5dB. The noise unit is based on A-weighted sound exposure level (ASEL; $L_{AE}$). To make equal ASEL of outdoor noise, finite impulse response (FIR) filter is applied to the originally sampled source to include the effect of distance attenuation. The evaluation method of the jury test adopted a Semantic Difference(SD) Method. In the result of the jury test for impulsive noise, the mean response rating expressed a linear relation and %HA(percent highly annoyed) displayed a exponential growth relation.

• 경영과학
• /
• 제25권3호
• /
• pp.13-26
• /
• 2008

We investigate the effect of government and public sector R&D Investment at IT Industry on the amount of Production, export and nongovernment R&D Investment at IT Industry. We, firstly, examine the stationarity of each variable by the unit root t-test and perform the co-integration test for the pairs of variables. We use YECM(Vector Error Correction Model) according to the results of co-integration test for the examination of Granger-causality between variables. It is found that there exist an Granger-causality between public sector R&D Investment and nongovernment R&D investment and also between public sector R&D Investment and export. Secondly, we analyze the impulse response of government and public sector R&D Investment at IT Industry on the amount of production, export and nongovernment R&D investment at IT Industry based on VECM model. It is found that the response of the amount of production is highest at 3th period and is lowest at 8th period and that of export shows similar pattern.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1858-1860
• /
• 2003

Ground rods as the discharge path are commonly installed to ensure the safety of human beings and facilities from the surge. Accordingly, proper grounding resistance are specified by the grounding types, and the specified resistance are also required to install the lightning protective facilities. it is needed to analyze the difference between these two resistance through the field test. Therefore, in this paper, the impulse response behavior of the ground rods is analyzed by constructing the test facilities and by testing the ground rods in multi-ground power distribution systems. The impulse responses were analyzed, in transient state, by testing the concrete poles as well since the grounding wires are installed in the concrete poles.

• Ocean and Polar Research
• /
• 제40권1호
• /
• pp.49-58
• /
• 2018

This study aimed to analyze the causality of hairtail prices among import and domestic distribution channels using a Vector Error Correction Model(VECM). The results are as follows. First, since the ADF unit-root test suggests that each of the price variables, apart from retail price, has a unit root, the price variables should be 1st-differenced to secure the stability of the prices. Next, through the Johansen co-integration test, it was discovered that there are long-term relationships among the price variables. On the basis of the co-integration test, VECM analysis shows that the producer price has a long-run balance with the import and wholesale prices. In particular, when the prices deviate from the balance, the producer price dynamically adjusts to return to the long-term relationship among prices. It also indicates that the producer price has an impact on the import, wholesale, and retail prices in the short-term, and the import price has an influence on the producer and wholesale prices. In addition, the impulse response analysis demonstrates that the impulse of import and producer prices has a lasting impact on each of the prices.