• 대한조선학회논문집
• /
• 제52권3호
• /
• pp.187-197
• /
• 2015

This study aims the development of a semi-analytic method for the parametric roll of large containerships advancing in longitudinal waves. A 1.5 Degree-of-Freedom(DOF) model is proposed to account the change of transverse stability induced by wave elevations and vertical motions (heave and pitch). By approximating the nonlinearity of restoring moment at large heel angles, the magnitude of roll amplitude is predicted as well as susceptibility check for parametric roll occurrence. In order to increase the accuracy of the prediction, the relationship between righting arm(GZ) and metacentric height(GM) is examined in the presence of incident waves, and then a new formula is proposed. Based on the linear approximation of the mean and first harmonic component of GM, the equation of parametric roll in irregular wave excitations is introduced, and the computational results of the proposed model are validated by comparing those of weakly nonlinear simulation based on an impulse-response-function method combined with strip theory. The present semi-analytic doesn’ t require heavy computational effort, so that it is very efficient particularly when numerous sea conditions for the analysis of parametric roll should be considered.

• 비파괴검사학회지
• /
• 제34권4호
• /
• pp.290-298
• /
• 2014

초음파 두께 측정 방법은 초음파가 표면에서 되돌아오는 시간을 측정하여 두께를 측정하는 비파괴검사 방법이다. 이때 초음파 진행 시간은 펄스의 최대값을 이용하여 측정하기 때문에, 물체의 두께가 얇을 경우 펄스 신호가 서로 중첩이 되어 기존의 초음파 방법으로 측정하기 어렵다는 단점이 있다. 이러한 단점을 보완하기 위해 본 논문에서는 파워켑스트럼과 최소분산켑스트럼을 사용하여 두께를 측정하는 방법을 제안하고자 한다. 켑스트럼 신호 처리는 초음파 신호를 임펄스 트레인과 전달함수(초음파 펄스 신호)로 분리하기 때문에 표면에서 돌아오는 초음파 신호의 시간을 임펄스 트레인의 주기로 정확하게 측정할 수 있다. 제안된 방법을 검증하기 위하여 다양한 두께를 가진 철, 아크릴 시편에 대해 실험을 수행하였다. 두께가 얇은 시편에 대해서는 펄스가 중첩이 되기 때문에 기존방법으로 측정이 어려움을 알 수 있었다. 하지만 제안된 방법인 켑스트럼 초음파 신호 처리를 적용한 결과 임펄스 신호로 분리하기 때문에 두께를 정확히 측정함을 알 수 있었다.

• The Korean Journal of Physiology
• /
• 제9권2호
• /
• pp.17-22
• /
• 1975

Adult nonpregnant female rabbits were subjected to the study of the effects of carbon monoxide inhalation on the uterine motility. Animals were anesthetized with intravenous injection of nembutal, 35 mg/kg, and the uteri were exposed. Polyethylene tubing which had a small hole near the blind tip was inserted in the loop and normal saline was infused at a constant rate of 1.5 ml/min. On the other end of the loop, an outlet of fluid was made. When a peristaltic wave proceeded to the hole, a rise of the pressure was ensued and it was transmitted to the pressure transducer, making an upward deflection of the recording pen on the physiograph. Carbon monoxide, 1,000 ppm in the concentration, was inhaled through a tracheal cannula for 30 minutes, following fresh air for 30 minutes. In some cases, pure oxygen was also supplemented for another 30 minutes. Uterine motility was expressed in terms of the impulse that was the time integral of the pressure and of the frequency of the peristaltic waves. The results obtained were as follows. 1. When 1,000 ppm carbon monoxide was inhaled for 30 minutes, the impulse dropped to $72{\pm}16.5%$ and the frequency to $75{\pm}22.7%$ of the values obtained before the gas administration. 2. By fresh air for 30 minutes, the impulse and the frequency restored to $77{\pm}25.7%$ and $92{\pm}21.1%$, respectively. 3. By the supplement of pure oxygen for 30 minutes, no remarkable improvement were revealed, showing $89{\pm}35.2%$ in the impulse and $91{\pm}10.8%$ in the frequency, respectively. 4. There was an appreciable discrepancy in the recovery courses of the impulse and the frequency, suggesting different mechanisms attributable to the alteration by carbon monoxide inhalation.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권8호
• /
• pp.477-486
• /
• 2000

This paper presents Pspice modeling methods for spark gaps and ZnO varistors and describes the application for the two-stage surge suppression circuit which was composed of the nonlinear components. The simulation modelings of nonlinear components were conducted on the basis of the voltage and current curves measured by the impulse current with the time-to-crest of $1~50 \mus$ and the impulse voltage with the rate of the time-to-crest of 10, 100 and 1000 V/\mus$. The firing voltages of the spark gap increased with increasing the rate of the time-to-crest of impulse voltage and the measured data were in good agreement with the simulated data. The I-V curves of the ZnO varistor were measured by applying the impulse currents of which time-to-crests range from 1 to $50 \mus$ and peak amplitudes from 10 A to 2 kA. The simulation modeling was based on the I-V curves replotted by taking away the inductive effects of the test circuit and leads. The meximum difference between the measured and calculated data was of the order of 3%. Also the two-stage surge suppression circuit made of the spark gap and the ZnO varistor was investigated with the impulse voltage of $10/1000\mus$$mutextrm{s}$ wave shape. The overall agreement between the theoretical and experimental results seems to be acceptable. As a consequence, it was known that the proposed simulation techniques could effectively be used to design the surge suppression circuits combined with nonlinear components.

• 한국해양공학회지
• /
• 제24권2호
• /
• pp.1-9
• /
• 2010

Oscillating Water Column is one of the most widely used converting systems all over the world. The operating performance is influenced by the efficiencies of the two converting stages in the OWC chamber-turbine integrated system. In order to study the effects of the pressure drop induced by the air turbine, the experiments using the impulse turbine and the orifice device are carried out in the wave simulator test rig. The numerical simulation utilizing the orifice and porous media modules is calculated and validated by the corresponding experimental data. The numerical wave tank based on the two-phase VOF model embedded with the above modules is employed to investigate the wave elevation, pressure variation inside the chamber and the air flow velocity in the duct. The effects of the air turbine on the integrated system and interaction among the wave elevation, pressure and air flow velocities variations are investigated, which demonstrates that the present numerical model are more accurate to be employed.

• 한국소음진동공학회논문집
• /
• 제12권7호
• /
• pp.510-519
• /
• 2002

The present study addresses a computational work of the weak shock wave propagating inside an automobile exhaust muffler. Several different types of the silencer systems are employed to investigate the magnitude of the shock wave during propagating through them. The Initial shock wave Mach number $M_s$ is varied between 1.01 and 1.30, and a normal shock wave is given at the inlet of the silencer systems. The second order total variation diminishing scheme Is employed to solve the two dimensional, compressible, unsteady Euler equations. The present computational results are compared with the previous experimental ones available. The present computations predict the experimental results with a quite good accuracy. Of the four silencer systems applied. the most desirable silencer system to reduce the peak pressure at the exalt of the exhaust pipe is discussed from the Point of view of the engineering design of the silencer systems.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.525-539
• /
• 2019

In this study, vibration characteristics of a gravity-based caisson-foundation breakwater system are investigated for ambient and geometric parameters such as various waves, sea levels, and foundation conditions. To achieve the objective, following approaches are implemented. Firstly, operational modal analysis methods are selected to identify vibration modes from output-only dynamic responses. Secondly, a finite element model of an existing caisson-foundation breakwater system is established by using a structural analysis program, ANSYS. Thirdly, forced vibration analyses are performed on the caisson-foundation system for two types of external forces such as controlled impacts and wave-induced dynamic pressures. For the ideal impact, the wave force is converted to a triangular impulse function. For the wave flow, the wave pressure acting on the system is obtained from wave field analysis. Fourthly, vibration modes of the caisson-foundation system are identified from the forced vibration responses by combined use of the operational modal analysis methods. Finally, vibration characteristics of the caisson-foundation system are investigated under various waves, sea levels, and foundations. Relative effects of foundation conditions on vibration characteristics are distinguished from that induced by waves and sea levels.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.394-402
• /
• 2009

To investigate the heavy-weight impact noise of apartment houses, numerical analysis was performed. The analysis acoustic pressure consider acoustic mode by finite element method. The variables considered effecting on the acoustic pressure are the Acoustic mode, acoustic damping, and the impulse load. The heavy-weight impact noise is a changeable value in the room. Since the most part of the frequency component of heavy-weight impact noise has low frequency. The noise in low frequency is related to the vibration of structure, the reflection of acoustic wave caused by wall and the standing wave called by acoustic mode. The prediction by the numerical analysis was verified with test result of the heavy weight-impact noise at apartment houses.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권12호
• /
• pp.597-600
• /
• 2006

When the energy of the nanoseconds high voltage pulse with hundreds picoseconds of the pulse rise time is emitted into the free space via an antenna, an ultra wide band electromagnetic wave is generated. This electromagnetic wave is expected to be used in transmitting vast amount of informations to far distance, high performance radars, post-packaging pasteurization of food, the detection of underground buried objects, searching of underground water veins or caves, the treatment of waste water or polluted gases and so forth. Additionally, this technology can be used in EMI(electromagnetic interference) evaluation of measuring instruments or printed circuit boards.

• 한국안전학회지
• /
• 제30권2호
• /
• pp.63-69
• /
• 2015

Recoilless weapons, which lead strong back blast and impulse noise more than 160 dB, have been used in compliance with the regulation of the safety zone for the safe operations. However, the safety zone regulations for the newly developed weapons should be prepared since the existing guidelines do not provide any information concerning the reason for the safety zone. In this study, the outdoor launch tests were performed to collect the data such as noise, pressure and temperature of the back blast. An assessment method using data obtained from launch tests has been proposed to determine the safety zone. The safety zone has been determined with consideration for the following criteria: Impulse noise, temperature and pressure of the back blast and blast angle. As a results, new safety zones for them have been established for the recoilless weapon developed by ADD (Agency for Defense Development). We expect that this research can be used as a guideline for establishing a new safety zone regulation of similar weapon to be developed.