• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.89-94
• /
• 1998

With increasing demands on automatic and high-capability manufacturing, the dynamic performance of machine tools becomes more and more important. In this paper, the correlation between dynamic compliance of the cutting system and the commencing point of chatter vibration in turning is checked by impulse excitation method and cutting tests for some cutting system. The correlation between chucking conditions of workpiece and the commencing point of chatter vibration is clarified, and it is proven that there is a mutual relations between them. Chatter vibration commenced at certain level of dynamic compliance of the cutting system regardless of the kind of the system. It shows the possibility of dynamic performance test of a lathe by means of impulse excitation method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.484-490
• /
• 2008

For CSLDV, the Chebyshev demodulation (or polynomial) technique and Hilbert transform approach have been used for mode shape reconstruction with harmonic excitation. In this paper, the Hilbert-Huang transform approach was applied as an alternative to impact excitation cases in terms of a numerical approach. The vibration of the tested structure is modeled using impulse response functions. In order to verify this technique, a simply supported beam was chosen as the test rig. With additional innovative steps which are the ideal-band pass filter and the nodal point determination, Hilbert-Huang transformation can be used for a good mode shape reconstruction even in the impact excitation case.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.241-246
• /
• 2002

Usually vibration properties are obtained from frequency response functions or impulse response functions of a system. Since the contact type sensors can affect the characteristics of vibrating systems, the non-contact type sensors such as laser Doppler vibrometer (LDV) are being widely used. Currently researches are being carried out in terms of modal analysis using a scanning vibrometer. For the continuous scan; the Chebyshev demodulation (or polynomial) is apparently suggested to extract the mode shapes. With single frequency sinusoidal excitation, this approach is well fitted. In this research, the Chebyshev demodulation technique has been applied to the impact excitation case. The vibration of the tested structure is modeled using impulse response functions. The technique is also adopted to the random excitation case. In order to verify the technique, a simply supported beam was chosen as the test rig. The calculation modules are developed by using MATLAB$\^$(R)/ in WindowsNT$\^$(R)/ environment.

• 한국음향학회지
• /
• 제18권5호
• /
• pp.63-67
• /
• 1999

최근 들어 실내음향 특성의 측정과 평가를 위해 백색잡음을 이용한 잔향시간 측정법 대신에 임펄스응답을 이용한 측정법이 널리 이용되고 있다. 이 방법은 재현성이 우수하고 다양한 실내음향 특성치들을 한꺼번에 산출할 수 있어 전통적인 잔향시간 측정법에 비해 여러 가지 장점을 가지고 있다. 본 연구에서는 MLS(Maximum Length Sequence) 신호를 이용하여 실내에서의 임펄스 응답을 측정하고 이를 후처리(post-processing) 하여 잔향시간(EDT, RT), 명료도 지수(C50, C80, D, U50, U80, AI), 음의 크기 지수(G) 등, 주로 실의 음성음향 성능을 측정하는 시스템을 구축하였다. 본 연구에서는 측정시스템과 후처리 프로그램의 구성, 몇몇 실내공간에 대한 시험 측정의 결과 및 고찰 등에 대해 소개하고자 한다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.235-240
• /
• 2007

For the identification of the 3 dimensional dynamic characteristics of the Bongjeong Temple, the dynamic test for 1/3 scaled model was performed. Dynamic test with impulse excitation and vibration table excitation can provide useful data for the estimation of dynamic characteristics such as natural frequencies, damping ratios, mode shapes and stiffness center. This will complement the previous research from the 2-dimensional static test and provide the reference data for the enhanced structural analysis of the traditional wooden structures.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.491-497
• /
• 2010

In this paper, we employed the classical molecular dynamics simulations using Tersoff's potential to calculate the elastic constants of the silicon carbide (SiC) crystal at high temperature. The elastic constants of the SiC crystal were calculated based on the stress-strain characteristics, which were drawn by the simulation using LAMMPS software. At the same time, the elastic constants of the SiC ceramics were measured at different temperatures by impulse excitation testing (IET) method. Based on the simulated stress-strain results, the SiC crystal showed the elastic deformation characteristics at the low temperature region, while a slight plastic deformation behavior was observed at high strain over $1,000^{\circ}C$ temperature. The elastic constants of the SiC crystal were changed from about 475 GPa to 425 GPa by increasing the temperature from RT to $1,250^{\circ}C$. When compared to the experimental values of the SiC ceramics, the simulation results, which are unable to obtain by experiments, are found to be very useful to predict the stress-strain behaviors and the elastic constant of the ceramics at high temperature.

• 실천공학교육논문지
• /
• 제13권3호
• /
• pp.497-505
• /
• 2021

재료의 변형률과 진동 측정을 실습하기 위한 외팔보 형태의 실험 장치를 개발하였다. 주변에서 구할 수 있는 재료와 저렴한 제어기를 사용하여 제작하였다. 철재 자로 된 외팔보에 서로 다른 위치에 변형률게이지를 설치하여 외부 하중에 따른 보의 변형률을 측정할 수 있도록 구성하였다. 전자석으로 외팔보를 가진하며, 함수발생기로 원하는 주파수로 외팔보에 진동이 발생하도록 하였다. 장치를 사용하여 수행이 가능한 세 가지 실험을 제시하였으며, 각각 저울 만들기 시험, 외팔보의 공진주파수 측정 실험, 그리고 가진주파수와 측정 주파수의 차이를 구하는 실험이다. 간단하면서도 저렴하게 만들 수 있는 실험 장치와 실험 포트폴리오를 통해 효과적인 하중 및 진동 측정 교육 수행이 가능할 것으로 기대된다.

• International Journal of Ocean System Engineering
• /
• 제3권4호
• /
• pp.225-230
• /
• 2013

This paper introduces the experimental results of sloshing model tests carried out at Seoul National University. Two 1/50-scale tanks, i.e., 2D and 3D models with the same shape, were manufactured for the comparative study. Particular interest was taken in the differences in impact pressures between the 2D and 3D models. Regular motion tests were conducted for different filling depths. For each filling depth, 500 cycles of regular excitation were imposed at each frequency. To observe the characteristics and severity of sloshing from the acquired pressure data, statistical analyses were performed, not only for the peak pressure, but also for the area-concept indices, which represented the amount of impulse.

• 소음진동
• /
• 제10권6호
• /
• pp.985-990
• /
• 2000

The signals that can be obtained from rotating machines often convey the information of machine. For example, if the machine under investigation has faults, then these signals often have pulse signals, embedded in noise. Therefore the ability to detect the fault signal in noise is major concern of fault diagnosis of rotating machine, In this paper, minimum variance cepstrum (MV cepstrum) . which can easily detect impulse in noise, has been applied to detect the type of faults of ball bearing system. To test the performance of this technique. various experiments have been performed for ball bearing elements that have man made faults. Results show that minimum variance cepstrum can easily detect the periodicity due to faults and also shows the pattern of excitation by the faults.

• 한국건축시공학회지
• /
• 제23권1호
• /
• pp.11-22
• /
• 2023

본 연구에서는 디스크형 공시체를 활용하여 콘크리트의 깊이별 열화도를 평가하기 위한 방법을 개발하고자 하였다. 이를 위해 원통형 콘크리트 시편의 동탄성계수는 양단자유공진주기법을, 디스크형 콘크리트 시편의 동탄성계수는 임펄스 기법과 충격공진기법을 활용하여 측정하였고, 이를 비교 분석하였다. 실험결과, 임펄스 기법 및 충격공진기법 모두 동일한 지름일 경우 두께가 두꺼워지면 디스크 시편의 동탄성계수는 원주형 공시체의 동탄성계수에 가깝게 측정되었으며, 그 값의 변동성 은 줄어들었다. 또한 같은 (두께)/(반지름) 비율일 경우 지름이 증가하면 디스크 시편의 동탄성계수 측정값의 변동성은 감소하였고, 이러한 경향은 충격공진기법을 이용한 측정에서 더욱 분명하게 나타났다. 디스크의 동탄성계수 측정 시 지름 100mm, 두께25mm의 시편에 대해 충격공진기법을 이용하는 것이 오차율을 줄일 수 있는 방법으로 확인되었다.