• The Korean Journal of Ceramics
• /
• 제4권1호
• /
• pp.47-52
• /
• 1998

The nonuniformity of energy absorption capability of ZnO varistor is systematically discussed in this paper. The nonuniformity of electrical characteristics and microstructure leads to decrease the energy absorption capability of ZnO varistor. The energy absorption capabilities were measured under different current waves, the experimental results stated that they have highly scattered phenomena. The influences of varistor surface area and nonuniformity of electrical characteristics to the energy absorption capability and the nonuniformity of commercial ZnO varistors were analyzed. There is a high nonuniformity existing in the energy absorption capability of commercial ZnO varistors.

• 한국항공운항학회지
• /
• 제14권2호
• /
• pp.27-32
• /
• 2006

The performance-design algorithm of a liquid ramjet engine was studied, which showed the comparable results with CFD calculation except the shock-boundary layer interaction region. In addition to the description of the design algorithm, several important design parameters, such as equivalence ratio, combustion efficiency, air capturing factor, and flight Mach number, are evaluated as predicting one of performance factors, Isp, of a typical ramjet engine, so that the flight envelope might not be determined with narrow perspective performance-operation-area in off-design regime.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.387-388
• /
• 2007

IEEE 802.15.4a의 UWB(ultra-wide band) 방식에서 PHY(physical layer) 시스템에 사용되는 FEC(forward error correction)는 RS(Reed-Solomon) 조직적(systematic) 블록 부호와 1/2의 부호율을 가진 조직적 길쌈 부호의 연접 형태로 이루어져 있다.[1] UWB 신호를 이용한 시스템은 연속적이지 않은 임펄스(impulse) 기반의 신호를 사용하기 때문에 정밀도 면에서 뛰어난 장점을 가진다. 본 논문에서는 IEEE P802.15.4a 표준에 명시되어 있는 FEC를 구현하여 AWG(adaptive white gaussian noise) 채널에서의 SNR(signal to noise ratio)에 따른 BER(bit error rate)을 구함으로써 성능을 분석하였다. 실험에서의 정확한 결과를 얻기 위해 15.4a의 UWB에서의 변조 방식에 따라 신호를 변조한 후 잡음을 삽입하여 결과를 도출하였다.

• 한국통신학회논문지
• /
• 제22권5호
• /
• pp.990-1006
• /
• 1997

This paper describes an interface function and its performance assessment for high-bit-rate digital subscriber line (HDSL) under ATM. The interface of HDSL function of ATM system was achieved by HDSL subscriber physical layer board assembly(HSPA) which was modeled as design standard for ATM. We have presented a new worst case of subscriber line conditions from existing results of investigations on impairments such as crosstalk, impulse noise, longitudinal, power line noise and others. We have measured the maximum service loop length available by HDSL, and found that HSPA, at a 2.048Mbps data transmission, is possible within a carrier serving area(CSA) under the worst case loop noise conditions at an error rate or 10$^{-7}$ on a two coordinated unshielded twisted pairs in the presense of impairments. We conclude tht, in terms of a performance-per-lin simulator, the HSPA is an excellent candidate for HDSL implementation under ATM.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.425-428
• /
• 2004

65% of the Korean peninsula is composed of mountainous area, 97% of which is composed of forest. Therefore, there is high possibility of mountain fire because a lot of potential inflammables such as fallen leaves are stacked on the ground. Moreover, most of the overhead transmission lines in Korea are operated on the mountain. However, there has been very little study for the effect of mountain fire on polymeric insulator for transmission line, though the study is significantly required Therefore, in this study the authors observed the deformation of the housing of the insulator under fire with respect to the ignition time, using artificial ignition testing equipment, and investigated electrical and mechanical characteristics of the insulator by dry withstand voltage test, impulse flashover test and tensile load test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.772-777
• /
• 2004

Opera house acoustics were subjectively evaluated in order to investigate the effect of performance stage views on the audience's perception of the seat acoustics in an opera house. Nine seats from an existing opera house were selected for the auditory and/or visual experiments according to seating area distribution and acoustical parameters such as RT and $1-IACC_{E3}$. The recorded music, convolved from the impulse response, was presented with and without visual images of the stage. Subjects were asked to assess the auditory/visual descriptors and overall impression of the music at each seat. The results showed that good visual input helps produce a favorable impression of the acoustics, but a limited view degrades acoustical impression. The acoustical parameters in the tested seats were also investigated to find the relationship between the acoustical parameters and the visual/sound impression.

• East Asian Economic Review
• /
• 제22권4호
• /
• pp.507-529
• /
• 2018

This paper evaluates the whole impact of quantitative easing on inflation in Korea implemented by the central banks in four major advanced economies, the U.S., Euro Area, U.K. and Japan. According to the analysis employing a VAR-X model with the security holdings of those central banks an exogenous variable, quantitative easing is estimated to exert downward pressures on inflation in Korea. Considering the impulse responses of Korean macroeconomic variables to a quantitative easing shock, the spillover effect is transmitted through exchange rate channel while trade channel turns out to be ineffective. In an additional analysis assessing the impact of each quantitative easing program of the central banks, only those of the Fed and European Central Bank are estimated to be significant. The empirical results prove to be robust even if using long-term interest rates as an alternative indicator of quantitative easing.

• 대한전자공학회논문지
• /
• 제24권2호
• /
• pp.196-200
• /
• 1987

The following methods are proposed for implementing digital dual tone multi-frequency (DTMF) receiver: using infinite impulse response(IIR) digital filters, period-counting algorithm, discrete Fourier transform(DFT), and fast Fourier transform(FFT)[2]. The PARCOR(Partical Correlation) analysis method which has been widly used in the speech signal processing area is applied to the dual tone multi-frequency(DTMF) signal detection. This method is easy to implement digitally and stronger to digit simulation of speech than any other methods proposed up to date. Since sampling rate of 4KHz is used in the DTMF receiver for the detection of input DTMF signal originally sampled at 8KHz, it effects two times higher multiplexing efficiency.

• 대한조선학회논문집
• /
• 제36권4호
• /
• pp.87-94
• /
• 1999

선수 구조부의 파랑충격현상은 대단히 복잡한 현상을 나타내고 있고 정확하게 규명하기 어렵기 때문에 아직 경험적인 설계에 의존하고 있다. 파랑충격하중에 의한 선수 구조부의 손상은 주로 충격압력역적과 파랑충격하중의 면적에 의하여 크게 영향을 받는다. 본 연구에서는 두 번째 단계로서 파랑충격하중에 대한 선수 구조부 강도의 추정을 위하여 효율적인 부재치수의 결정 프로그램을 개발하고, 파랑충격하중의 면적을 추정하고자 한다. 동적 비선형 범용 프로그램 LS/DYNA3D를 이용하여 DWT 300,000급 VLCC의 선수 구조부를 이상화된 패널구조 모델의 중앙부에서의 최대 손상변형을 비교하여 추정하고자 한다. 이것은 다음 단계의 선수 구조부의 동적 구조해석의 검증에 사용될 것이다. 본 연구에서는 극치 6.5MPa, 후부높이 1.0MPa, 그리고 지속시간 5.0msec인 파랑충격압력 곡선 하에서, 강성이 작은 보강재로 보강된 경우 파랑충격하중의 면적은 $1.5s{\times}1.5s$ 보강재 간격(s), 강성이 큰 스트링거로 보강된 경우는 $2.5s{\times}2.5s$로 추정하였다.

• 한국안전학회지
• /
• 제28권1호
• /
• pp.88-94
• /
• 2013

The purpose of this study is to find out the difference of foot pressure according to the firefighter's work postures for providing the basic information to prevent Musculoskeletal disorders. This study was conducted by 9 male firefighters. Work postures were selected for rescuee handling, fire hose and hydraulic rescue equipment work postures. These were divided into 3 position, "High", "Middle" and the postures of taking out and letting down hydraulic rescue equipment were analyzed as starting point and end point respectively. Foot Pressure was used to analyze contact area, peak pressure, and maximum force in terms of work postures, and compared between fire hose and hydraulic rescue equipment work postures. The results of foot pressure are as follows. According to the results of rescuee handling work postures, one person handling posture showed wide contact area and foot pressure showed the highest at right foot. Accoridng to the (High), (Middle), (Low) postures of fire hose, the results didn't show the difference among the contact area, peak pressure and maximum force. As the results of hydraulic rescue equipment work postures, (Low) postures showed the highest in terms of the right foot of contact area, peak pressure and maximum force and (High) postures showed the highest in left foot. The increase of foot pressure lead to be inconvenience of low extremity and muscle fatigue for maintaining postural control cause pain. Thus, it is necessary to design insole-equipped working shoe for reduce the impulse and effect of foot during the rescuee handling work which standing out as foot pressure.