• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.4
• /
• pp.1-11
• /
• 2020

In this study, study on the internal ballistic analysis method for single-chamber dual-thrust rocket motors meeting a dual-thrust profile requirement by tailoring the grain burning area is presented. The analysis method, which can acquire variables required for the performance prediction, considering gradual change of burning rate correction factor and specific impulse in the transition phase, is proposed. Improvements compared to the analysis method in the previous study, which do not consider change in the transition phase, are verified through comparison between the newly proposed method and the method in the previous study. Internal ballistic variables are obtained for four different ground firing test conditions using the proposed method, and the performance prediction for each condition is conducted using these variables. These prediction results and the ground test data are in good agreement, so it is confirmed that the performance prediction of dual-thrust motors with same design geometries based on the proposed analysis method is available.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.3
• /
• pp.32-38
• /
• 2001

Multi-carrier data transmission system performance is mostly limited by Inter- symbol-interference that is caused by a dispersive characteristic of the transmission channel. In order to enhance the system performance to meet the service requirements of local access, the channel impulse response shortening method incorporated with a channel frequency response compensation method is proposed. For a fast and efficient implementation of the equalizer proposed, Kalman and LMS algorithms are successively used. To verify the channel equalization performance, a set of computer simulation is performed on a filter bank based multitone system operating in a typical high-speed local area data transmission environment. The results showed us a comparable signal-to-interference improvement over the conventional multitone equalization scheme.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.6
• /
• pp.72-80
• /
• 2015

Recently air breathing propulsion system is much interested in relatively comparing to the conventional chemical propulsion, and the R&D of this area is performed much more including the basic research of the solid ramjet in our country. The boron is applied to the solid fuel because of its high heating value, but it has a complicated combustion characteristics. therefore many researches have been studied in this area. In this paper the combustion characteristics of the boron have been investigated through the published papers for the purpose of the ramjet fuel application.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.254-257
• /
• 2007

This paper presents an examination of the spatial integration method for extracting the RCS of a trihedral corner reflector from SAR images for SAR external calibration. An exact external radiometric calibration technique is required for extracting an exact calibration constant. Therefore, we examine the accuracy of the spatial integration method, which is commonly used for the SAR external radiometric calibration. At first, an SAR image for a trihedral corner reflector is simulated with a high-resolution SAR impulse response with a known theoretical RCS of the reflector, and a background clutter image for the high resolution SAR system is also generated. Then, a SAR image in a high resolution is generated for a trihedral comer reflector located on a background clutter by superposition of the two SAR images. The radar cross section of a trihedral corner reflector in the SAR image is retrieved by integrating the radar signals of the pixels adjacent to the reflector for various size of the integration area. By comparison of the measured RCS by the integration method and the theoretical RCS of the reflector, the effect of the size of the integration area on the extraction of the calibration constant is examined.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.136-145
• /
• 2007

Redevelopment about land that nature green tract of land and dilapidated city equipment including greenbelt make a strong resolution in city with change of town planning area according to growth of city is consisting. Formation of city of these phenomenon is old and personality of city changes rapidly, the speed becomes fast. Phenomenon that Busan moves to neighborhood area as convenience of traffic of industrial facilities that was on spearhead of economic growth move to outer wall of city and port facilities is deterioration, as becoming decline Tuesday industry form of city in the second industry the third phenomenon that alter by the 4th happen and case of residential area old residential area of inland area change for the worse of habit be and impulse to steal is augmented in the 1970, 80 is appearing. Hereupon the result inland area which analyzes the change with the use area compared to the area where it is coming in contact to the coast the diffusion of the residential area or the business park appears area, the factory back of nine cities acts Gangseo-gu or Gijang-gun of the industry area this with the fact that it changes.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.933-938
• /
• 2001

A 5-valve(intake 3-valve) engine has been developed to increase engine performance. These vehicles have a high power caused by the decrease of inertia mass of an intake valve and the increase of intake effective area. In this study, velocity profiles at near intake valves were inspected by using a two-color PIV and laser sheet method with tumble control valve(TCV). In addition, steady flow tests were performed to quantify tumble ratio on flow-fields generated with a TCV. These experimental results show that the tendency of the tunble ratio in intake 3-valve engine is different from the one in intake 2-valve engine. From this results, the intake flow characteristics around intake valves were made clear.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.589-592
• /
• 2000

무선 LAN은 유선 LAN을 대체하기 보다는 기간망과 이동(Mobile) 사용자간의 수십 미터 이내의 종단 연결점을 제공한다는 개념으로 구성되며, 이동성(Mobility)과 확장성(Scalability)을 발휘할 수 있다는 장점으로 많은 응용 분야에서 각광을 받고 있다. 초광대역 시간 도약(ultra wideband time hopping; UWB/TH) 임펄스 무선기술은 기존 시스템의 정상적인 동작에 거의 영향을 미치지 않기 때문에 별도의 주파수 할당이 필요치 않는 새로운 기술이다. 본 논문에서는 IEEE 802.11의 무선 LAN의 프로토콜을 기적으로 사용하고 전송 방식을 직접수열 확산 스펙트럼 방식을 사용하는 기존의 방법과 임펄스 라디오 방식을 사용하는 경우를 비교하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.3
• /
• pp.174-179
• /
• 2007

In this paper, we present a optimal module selection using genetic algorithm under the power, area, delay constraint. The proposed algorithm use the way of optimal module selection it will be able to minimize power consumption. In the comparison and experimental results, The proposed application algorithm reduce maximum power saving up to 26.9% comparing to previous non application algorithm, and reduce minimum power saving up to 9.0%. It also show the average power saving up to 15.525% and proved the power saving efficiency.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.241-244
• /
• 1997

23 hallux valgus patients were evaluated with clinical examinations and plantar pressure distribution measurements. A masking method for detailed plantar pressure distribution analyses was suggested. With higher grade of hallux valgus, pressure, contact length & area, and impulse on metartasus were significantly increased. Localized pressure concentration is very important in foot diseases and appropriate plantar pressure distributions should be considered on any shoe design.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.25-28
• /
• 2008

This study investigates the effect of geometrical shape of concert halls, with variation in the shape and location of diffusers. The acoustical characteristics both in the audience area and on the stage 1:50 scale models of shoebox and fan-shaped halls. It was found that the front side walls affect sound diffusion. The 1:50 scale model based on the Boston Symphony Hall was used for monaural impulse response measurements for calculation of RT, EDT, C80, G and ST1. In addition, calculating the numbers and amplitudes of reflection rays were applied to quantify diffusion phenomena.