• 한국전자통신학회논문지
• /
• 제16권4호
• /
• pp.591-598
• /
• 2021

디지털 위상 고정 루프는 위상 동기화를 위해 사용되는 회로로 일반적으로 통신, 회로분야 등 다양한 분야에서 사용된다. 디지털 위상 고정 루프를 설계 시 상태추정기를 사용하는 경우 보통 칼만 필터와 같은 무한 임펄스 응답 상태추정기를 활용해왔다. 일반적으로 무한 임펄스 응답 상태추정기 기반 디지털 위상 고정 루프의 성능은 우수하지만, 초기값의 부정확, 모델 오차, 외란 등의 예상하지 못하는 상황에서 급격한 성능저하가 발생할 수 있다. 본 논문에서는 새로운 디지털 위상 고정 루프를 설계 하기 위해 최적의 측정값 구간 길이를 갖는 최소 공분산 유한 임펄스 응답 필터를 제안한다. 제안된 유한 임펄스 응답 필터의 중요 파라미터인 측정값 구간 길이를 구하기 위해 수치적 방법을 소개하며, 필터의 이득을 얻기 위해 비용함수로 오차의 공분산 행렬을 설정하고, 이를 최소화 하기 위하여 선형 행렬 부등식을 사용하였다. 제안된 디지털 위상 동기 루프의 우수성과 강인성을 검증하기 위해 노이즈 정보가 부정확한 상황에서 기존 방법과의 비교 및 분석을 위한 시뮬레이션을 수행하였다.

• 한국지반환경공학회 논문집
• /
• 제12권4호
• /
• pp.53-63
• /
• 2011

동적 지진해석 수행 시 적절한 입력지진파를 선정 생성하는 것은 매우 중요하다. 현재 국내에서는 일반적으로 국외에서 계측된 강진 기록이나 인공지진파가 입력지진파로 사용된다. 계측지진기록은 지진파의 고유성질인 시간에 따라서 주파수 특성이 변이하는 비정상(Non-Stationary) 특성을 가지고 있지만 설계 응답스펙트럼과는 일치하지 않으며 주파수영역에서 생성된 인공지진파는 설계 응답스펙트럼과는 일치하지만 정상(Stationary) 특성을 가지고 있는 단점이 있다. 본 연구에서는 계측기록의 Non-stationary 특성을 보존하되 동시에 설계 응답스펙트럼에 상응하는 지진파를 생성하였다. 적용된 기법은 Impulse 함수를 이용하여 시간영역에서 지진기록을 목표 스펙트럼에 상응하도록 보정하는 알고리즘이다. 적용 결과, 시간영역 변화 알고리즘은 성공적으로 계측 지진기록을 설계 응답스펙트럼와 일치하도록 조정할 수 있으며 원 지진기록의 Non-stationary 특성을 보존하는 것으로 나타났다. 나아가 계측 지진기록과 보정된 지진기록을 적용한 비선형 지반응답해석을 수행한 결과, 보정된 지진파를 이용한 결과가 보다 합리적인 것으로 나타났다. 본 연구에서 변환된 지진기록은 기존 기록의 문제점을 보완하는 진보된 입력지진파인 것으로 나타났으며 추후 지진해석 시 이를 준용하는 것이 합리적일 것으로 판단된다.

• Smart Structures and Systems
• /
• 제20권3호
• /
• pp.263-272
• /
• 2017

This paper presents the time response of a mixed vibration system with the viscous damping and the hysteretic damping. There are two ways to derive the time response of such a vibration system. One is an analytical method, using the contour integral of complex functions to compute the inverse Fourier transforms. The other is an approximate method in which the analytic functions derived by Hilbert transform are expressed in the state space representation, and only the effective eigenvalues are used to efficiently compute the transient response. The unit impulse responses of the two methods are compared and the change in the damping properties which depend on the viscous and hysteretic damping values is investigated. The results showed that the damping properties of a mixed damping vibration system do not present themselves as a linear combination of damping properties.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.122-128
• /
• 2002

In this paper dynamic responses of an engine, which is supported by hydraulic mount, to throttle tip-in/Tip out are analyzed. Because the hydraulic mounts have non-linearity that the characteristics of stiffness and damping vary with frequencies, it is difficult to analyze the dynamic behavior of an engine using general integral algorithms. Convolution integral and relationship between unit impulse response functions and frequency response functions are therefore used to simulate the transient behaviors of an engine indirectly. In time domain, impulse response functions are calculated by two-side discrete inverse courier transform of frequency response function achieved by laplace transform of equations of motion. Considering the fact that the shapes of behavior of an engine simulated by the proposed method are in good agreement with test results, it is confirmed that the proposed method is very effective for the analysis of transient response to throttle tip-in/out of an engine with hydraulic mounts.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권4호
• /
• pp.283-288
• /
• 2002

This paper has shown that the impulse and the unit step responses of 2nd-order systems can be computed by an analytic method. Three different 2nd-order systems are investigated: the prototype system, the system with one LHP(left half plane) real zero and the system with one RHP(right half plane) real zero. It has also shown that the effects of the LHP or the RHP zero are very serious when the zero is getting closer to the origin on the complex plane. Based on these analytic results, this paper has presented two sufficient and necessary conditions for 2nd-order linear SISO(single-input/single-output) stable systems to have the nonovershooting and the monotone nondecreasing step response, respectively. The latter condition can be extended to the sufficient conditions for the monotone nondecreasing step response of high-order systems.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.540-545
• /
• 2001

In this paper dynamic responses of an engine, which is supported by hydraulic mount, to throttle tip-in/tip out are analyzed. Because the hydraulic mounts have non-linearity which the characteristics of stiffness and damping vary with frequencies, it is difficult to analyze the dynamic behavior of an engine using general integral algorithms. Convolution integrals and relationships between unit impulse response functions and frequency response functions are therefore used to simulate the transient behavior of an engine indirectly. In time domain, impulse response functions are calculated by two-side discrete inverse Fourier transform of frequency response function achieved by Laplace transform of equations of motion. Considering the fact that the shapes of behavior of an engine simulated by the proposed method are in good agreement with test results, it is confirmed that the proposed method is very effective for the analysis of transient response to throttle tip-in/out of an engine with hydraulic mounts.

• 응용통계연구
• /
• 제25권2호
• /
• pp.239-249
• /
• 2012

We estimate nonlinear impulse responses of stock indices by asset class by the Local Projection method as suggested by Jorda (2005) to compute impulse responses. The method estimates impulse responses without the specification and estimation of the underlying multivariate dynamic system unlike the usual way of vector autoregression(VAR). It estimates Local Projections at each period of interest rather than extrapolating into increasingly distant horizons with the advantages of easy estimation and non-linear flexible specification. The Local Projection method adequately captures the nonlinearity and asymmetry of the impulse responses of the stock indices compared to those from VARs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1979년도 하계 전자.전기연합학술발표회논문집
• /
• pp.166-167
• /
• 1979

Performances of three computational algorithms for one-dimensional frequency filtering are compared and tradeoffs are studied. If the size of the filter impulse response is small, it is well-known that the conventional convolution is superior than the FFT convolution. If the size of the impulse response is large, it was suggested that the recursive filter might be competitive in terms of speed to the FFT convolution. We, therefore, have developed an computational, algorithm for the recursive filter to compare the speed advantages over the FFT convolution and the results are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.980-983
• /
• 1996

A new version of the discrete-time optimal FIR (finite impulse response) filter utilizing only the measurements of finite sliding estimation window is suggested for linear time-invariant state-space models. This filter is called the BLUFIR (best linear unbiased finite impulse response) filter since it provides the BLUE (best linear unbiased estimate) of the state obtained from the measurements of the estimation window. It is shown that the BLUFIR filter has the deadbeat property when there are no noises in the estimation window.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2548-2551
• /
• 2005

In this paper, a robust receding horizon finite impulse response(FIR) filter is proposed for a class of linear discrete time systems with uncertainty satisfying an integral quadratic constraint. The robust state estimation problem involves constructing the set of all possible states at the current time consistent with given system input, output measurements and the integral quadratic constraint.