• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.3
• /
• pp.84-95
• /
• 2001

This study was conducted to suggest the ecological restoration methods for the decomposed granite roadside cutslopes by Natural Topsoil Restoration Methods(NTRM). Four woody species, 3 shrub species, 4 native grasses, 8 wild flowers and 2 cool-season grasses were used. The experiment was conducted with the purpose of developing ecological restoration techniques by achieving following objectives for restoration by using native woody plants, shrubs, native plants and wild flowers; (1) prevention or reduction of wind and water erosion, (2) provision of food and cover for variety of animal species, (3) improvement of the visual or aesthetic quality of disturbed sites. The main results were summarized as follows. 1. Restoring naturalness to human-altered landscapes are important to protecting the worlds biodiversity. In this study, to restore or create an ecological community use as full a complement of native species as possible. Ecological restoration means returning a specific sites to its predisturbance condition. 2. Some species which are introduced first may inhibit the germination and growth of slower-growing species, or they may prevent the growth of other species whose propagules arrive later. In this study, cool season grasses was used small amount than native plants and woody species, because and Indigofera pseudo-tintoria grows well. Tall fescue and perennial ryegrass shows quick germination, but they could not inhibit the other species growing relatively slow. Pinus thunbergii used at Gonam near the ocean was suppressed by the other plants, so it can be concluded that using container seedlings is effective than seeding. 4. Ailanthus altissima, Albizzia julibrissin, Rhus chinensis Lespedeza cyrtobotrya, and Indigofera pseudo-tinctoria were germinated. In wild flowers, Coreopsis lanceolata, Dianthus sinensis, Coreopsis tinctoria, and Lotus corniculatus var. japonicus grew well and show enough plant height which will not suppressed by shrub and woody plants. After one year, native grasses such as Arundinella hirta, Miscanthus sinensis var. purpurascens and Imperata cylindrica var. koenigii cover the slopes well. 5. 25 herbaceous plants such as Trifolium repens, Arthraxon hispidus, Barbarea orthocerae, Potentilla fragarioides, Lepidium apetalum, Chenopodium album var. centrorubrum, Glycine soja, Rubus crataegifolius and 4 woody species such as Lespedeza maximowiczii, Robinia pseudoacacia, Symplocos Chinensis, Quercus acutissma were invaded. 6. Ecological restoration works by Natural Topsoil Restoration Methods for revegetation of the decomposed granite roadside cutslopes were successfully accomplished. It prevents surface water erosion and shows diverse vegetation structure. It will be successful to restore decomposed granite cutslopes.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.9
• /
• pp.533-541
• /
• 2015

We investigate the Japan's Master Plan of Comprehensive Sewerage System (JMPS) and Lake Biwa basin sewerage and suggest future development direction of the Watershed Sewerage System Maintenance Plan in Korea enforced on February 2, 2013. The JMPS is designed for compliance with the environmental standard for water quality under the Environmental Policy Act. The effluent standards applied in the master plan of Lake Biwa's Sewerage Plan for the Lake Biwa is tougher than the national standards. Therefore the Lake Biwa Baisn Sewerage System was the first in Japan to adopt facilities that perform advanced treatment for nitrogen and phosphorus removal. BOD, SS, T-N and T-P concentrations of discharge water of sewage are 0.9, 0.6, 5.5, 0.06 mg/L, respectively. Especially removal efficiency for BOD is 99.5 percent. It is necessary to study the diversification of the evaluation criteria, cost minimization approach, subsidy system improvement, economic concept of discharge load adjustment system and establishment of basin sewerage concept for the development of the basin sewerage plan in Korea.

• Journal of the Korean association of regional geographers
• /
• v.15 no.1
• /
• pp.1-15
• /
• 2009

This study aims to provide preliminary data needed for establishing policies on the environment and disasters of Goryeong county. The main results are as follows. First, the present master plan of the region does not reflect local socio-economic and environmental conditions and the local people's opinion. Second, The air conditions of Gyeongbuk province and Goryeong county are within the permitted limit of air pollution of Korea. Third, the analysis of water pollution index in Nakdong river system shows improvement of water quality in both Andong and Goryeong. Fourth, the conditions of waste collection and disposal are improved in both Gyeongbuk province and Goryeong county. Fifth, in case of environmental pollutant emitting facilities of Gyeongbuk province, the proportion of 1st to 4th grade(relatively much more environmental pollutant emitting quantity than 5th grade) tends to be increasing. Sixth, environmental pollutant emitting facilities of Goryeong county are remarkably increasing in Dasan, Gaegin, Ssangrim, involving industrial complex. Finally, in case of disasters, it is relatively stable in Yecheon, Gumi, Uiseong, Yeongju and Cheongdo, while relatively unstable in Seongju, Gunwi, Yeongcheon, Chilgok, Mungyeong, Bonghwa and Goryeong.

• Journal of Convergence for Information Technology
• /
• v.10 no.5
• /
• pp.117-125
• /
• 2020

Our study identifies a cost and a benefit incurred in implementing an investment project to offer new public services by use of food waste disposers and direct input of feces in sewers. This is done with identifying costs of each processing division and benefits of the project by objective statistical data and engineering perspective. In summary, cost items identified are as follows: there are house laterals, removal of septic tanks, etc. for sewer pipes system. As to water quality conservation, cost incurs in storm water outfalls and divert chambers, sewage storage tanks, equipment to treat sewer overflows, and so on. With respect to sewage treatment plants(STPs), there are so many items as increase of contaminant loads in influent of STPs, and other items. There are benefit items in health improvement due to odor mitigation, increase of energy productivity, saving cost of food waste treatment and cleaning septic tanks, etc. These estimates will be used as a basic data for its economic effect.

• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.611-623
• /
• 2014

The alluvial aquifer, widely developed near the four major rivers such as Nakdong River, can be used effectively for groundwater artificial recharge and is expected to be the future water resources in Korea. This study is aimed at examining the impact of repeatedly injected river water into the riverside alluvial aquifer on injection rate or efficiency in its system at Changweon area. For this, injection tests were performed two times, first on June 19 and second on September 25 through October 9, 2013, and the mixing ratios of river water to groundwater were used as the tool to compare the efficiency of injection. The mixing ratios were evaluated by using electrical conductivities of injected river water (average $EC=303{\mu}S/cm$) and groundwater ($EC{\fallingdotseq}6,000{\mu}S/cm$) measured at 20 m depth of four observation wells installed 10 m apart from each injection well. The result shows the remarkable differences on two respects. First, in some observation well, detection time for incipient injection effect during $2^{nd}$ injection test was shown to be much slower than that of $1^{st}$ injection test. Second, the hourly increasing rate of mixing ratios in $2^{nd}$ test was revealed to be reduced much more than that of $1^{st}$ test. This means that the efficiency of injection was badly deteriorated by only 1,210 minute injection work. Therefore, injection water needs to be adequately treated beforehand and repeated pumping work and/or resting phase is needed afterwards. To a certain extent, the improvement of water quality in saline aquifer was verified in this system by injection tests.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.385-390
• /
• 1998

The effect of agglomeration treatment was examined to prevent the parched cereal powder from clumping when it is blended with water. Parched cereal powder was composed of 66.9% carbohydrate, 7% water, 12.1% crude protein, 12.1% crude fat and 1.9% ash, respectively. Particle size of parched cereal powder was generally enlarged by agglomeration treatment. This phenomenon was confirmed by particle size analyzer and microscopic observation. The color of agglomerated sample was shown to be slightly darker than the untreated sample. The water absorption indices of agglomerated samples which were steamed for 2min and re-dried were significantly increased as compared with the untreated sample. The water solubility indices of agglomerated samples showed generally lower values than those of untreated samples. In views of quality and processing time, the optimum condition of agglomeration treatment for manufacturing well-dispersable parched cereal powder in water was 15min re-drying after 2min steaming. It is concluded that the agglomeration treatment improves the dispersibility of parched cereal powder and thus facilitates the intake of it after mixing with water.

• Resources Recycling
• /
• v.18 no.3
• /
• pp.55-61
• /
• 2009

Dewatering process to remove water from pigment sludge was important in the diverse aspects of the improvement of product quality, curtailment of the drying cost and the transportation. It was difficult to dewater pigment particles with the mechanical forces because the size was fine under $5{\mu}m$. Thermal filter press dewatering equipment composed of squeezing plate and a fixed heating plate was developed to improve the dewaterability of pigment the sludge as supplying the heat from the fixed heating plate to the cake. Several tests that estimate the dewaterability for pigment sludge as with or without squeezing process and the difference of dewatering time was conducted with this equipment. Dewaterability of thermal dewatering under squeezing process was increased about 20% compared with non squeezing process. Under squeezing process, thermal dewatering tests changing dewatering time with 70 and 80 minute were conducted respectively. The water content of cake was more reduced at dewatering time of 80 minute compared with 70 minute, and dewatering velocity was also decreased, which caused the productivity of thermal filter press to drop. It was observed that clogging of filter cloth didn't almost occur because the liquid was discharged from cake layer easily. In this research, it was resulted that the squeezing process and long dewatering time were effective to improve the dewaterability of pigment sludge. So, this thermal filter press equipment was useful for dewatering the fine particle sludge like pigment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.9
• /
• pp.1219-1224
• /
• 2007

In this study, we explored the application of Wasabi addition to baechu kimchi with regard to quality improvement, by reviewing the optimum Wasabi level and its effects on the product physicochemical characteristics during fermentation. The final weight percentages of Wasabi in the baechu kimchi were adjusted to 0, 2, 3, 4, and 5% per weight of baechu, respectively, and the samples were fermented for 35 days at $10^{\circ}C$. Following fermentation, the treatments over 3% Wasabi contained the highest pH and lowest total acidity values. Total vitamin C and reducing sugar content increased initially, up to certain fermentation times depending on the level of Wasabi contents within the treatments over 3% Wasabi, and decreased afterwards. The water soluble pectin content increased as the fermentation period increased; however, it decreased with increasing levels of Wasabi. In conclusion, the optimum levels of added Wasabi in the baechu kimchi were 3% and 5% per weight of baechu, to have a fermentation-retarding effect on the product.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.87-92
• /
• 2010

As the Concept "how environmental friendly" becomes more and more important in road construction. However, so far there is no estimation method. Environmental friendly concept can be incorporated at the plan level in order to influence decision making, and support policies that affect environment. The overall goal of this study was to develop environmental friendly concept measures for the national highway and to develop a methodology to implement a more environmental friendly concept. The research identified 8 performance measures through a project analysis that could address environmental impact assessment system's ten strategic goals - Topography, Wildlife, hydrology, landuse, air quality, water quality, soil, waste, noise, landscape. The qualitatively and quantitatively evaluation approach was selected as the decision support framework and performance measure were investigated using the AHP(Analytic Hierarchy Process) and pilot corridor for a 10 section and calculate the index values. The methodology was applied to a pilot corridor comprised of a 120km section of national highway in korea. The methodology made it possible to identify the specific performance measures that need improvement to enhance the overall environmental friendly concept. It is fairly intuitive, based on readily available data, and is easy to apply. It provides a powerful tool for government to assess the relative environmental friendly conceptof their transportation corridors now and in the future. It allows for comparisons within a corridor and with other corridors and identifies the improvements needed to enhance the environmental friendly concept.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.675-684
• /
• 2020

To prevent safety accidents caused by aging pipe infrastructure and to maintain water quality, construction projects for water and sewage pipes are actively conducted across Korea. This study analyzed the criteria situations, site survey details, and regulation revisions related to the calculation of construction cost standards for pipe laying and joining work. The analysis showed that the major causes for revision are the unclear construction scope, limitations in implementing some pipe materials due to installation facility types, workforce focused on ordinary labor, limitations of manual laying work, and the lack of tool hire cost and machine expense-calculation criteria. Field studies were conducted to categorize the pipes according to their features, in addition to identifying the use of lifting heavy equipment and light equipment. In addition, excavation and testing work conducted in connection to pipe laying, as well as the use of skilled labor, were investigated. The current study clarified the work scope through new common items, provides an organization based on the pipe material, adjusted the workforce ratio to focus more on skilled labor, and developed grounds for calculating machine expenses. These revisions were estimated to save approximately 1.28% of the construction costs in each project according to an analysis of the construction cost impact study. truction costs in each project, according to an analysis of construction cost impact study.