• 한국국방경영분석학회지
• /
• 제36권2호
• /
• pp.85-106
• /
• 2010

최근 정부가 공공부문에 대해 저비용, 고효율을 지속적으로 요구해 옴에 따라 국방부문도 효율성 개선을 위한 노력을 하고 있다. 그러나 군수부대의 효율적 운영에 대한 계량적 분석이 없는 실정으로, 본 연구는 군수부대의 효율적 경영 여부를 평가하기 위한 방법을 제시하고자 한다. 이를 위해 기존 선행연구 고찰을 통해 보급부대의 효율성 평가에 적절한 변수를 선정하여 제시하고, 공공부문 효율성 측정에 유용한 DEA(Data Envelopment Analysis)기법을 활용하여, 야전 보급부대를 대상으로 효율성을 평가한 후 비효율적 조직의 효율성 개선을 위한 방안을 제시하고자 한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.67-67
• /
• 2011

Compound semiconductor/CNTs composites have shown considerably improved efficiency improvement in photovoltaic devices, which is often attributed to two different factors. One is the formation of efficient electronic energy cascade structures. The other effect of CNTs on the performance of photovoltaic devices is the decrement of interfacial resistance. The interfacial resistances at n-type/ p-type materials and/or n-type materials/TCO electrode are reduced by an outstanding electrical property of CNTs. In addition to the effects of CNTs, we report the third reason for increment of efficiency in photovoltaic devices by CNT's well-known electrical field enhancement effects. The improved ${\beta}$ values in reverse-FE currents of CIGS electrode with SWNTs layers indicate the enhancement of electrical field in photovoltaic devices, which implies the acceleration of the electron transfer rate in the cell. Due to the formation of an efficient electronic energy cascade structure and the decrease of the interfacial resistance as well as the improvement of the electrical field in the photovoltaic devices, the power conversion efficiency of electrochemically deposited superstrate-type CIGS solar cells was increased 24.3% in the presence of SWNTs and showed 10.40% conversion efficiency.

• 한국산업융합학회 논문집
• /
• 제24권6_1호
• /
• pp.645-658
• /
• 2021

In this paper, we propose a new approach to intelligent control based on fuzzy logic for work efficiency improvement of smart factory by the applicaion of ariticulated robot. The intelligent control that is applied to the working process by the joint of robotic manipulator is the main focus to improve a work efficiency for implimentation of smart factory in general manufacturing process. In this study, we propose a new method of a fuzzy model and then develop a nonlinear relationship between interaction forces and manipulator position using a fuzzy model. The reliability of the proposed control method is illustrated by simulation and experiments.

• 한국해양공학회지
• /
• 제31권3호
• /
• pp.183-188
• /
• 2017

This paper provides numerical results for the estimation of the efficiency of KRISO energy saving devices in the design stage. A finite volume method is used to solve Reynolds averaged Navier-Stokes (RANS) equations, where the SST k-$\omega$ model is selected for turbulence closure. The propeller rotating motion is determined using a rigid body motion (RBM) scheme, which is called a sliding mesh technique. The numerical analysis focuses on predicting the power reduction by the designed KRISO devices (K-DUCT) under a self-propulsion condition. The present numerical results show good agreement with the available experimental data. Finally, it is concluded that CFD can be a useful method, along with model tests, for assessing the performance of energy saving devices for propulsion efficiency improvement.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1436-1441
• /
• 2004

Achieving the maximum blasting efficiency with minimum abrasive consumption is a critical concern in surface preparation stage of shipbuilding and offshore industry. Increasing the abrasive flow rate beyond the optimum point results in a major reduction in productivity even though the amount of abrasive used is larger. So, this study is intend to find out the optimum abrasive-to-air mixing ratio which can make a significant improvement in blasting efficiency and remarkably reduce the amount of abrasive used. From the test results, it can be identified that as the abrasive feeding rate is increased linearly, blasting efficiency is increased to a maximum point and then gradually decreased in the form of a bell-shaped.

• 품질경영학회지
• /
• 제37권3호
• /
• pp.123-139
• /
• 2009

This study examines the relative efficiency of 34 local public medical centers in Korea. In order to concretely grasp the causes of inefficiency and suggest improvement solutions, the desirable set point was established based on the actual value which needs to be improved. As a result of analysis, we determined that output must be increased while input is held constant in order to improve effectiveness through the actual value and set point. Efficiency cannot be achieved if input is augmented solely to increase output. Also, to increase output, the medical centers need to improve their quality without increasing any input for customer visits and hospitalizations. Further, in order to strategically promote effectiveness and efficiency of local public medical centers, these medical centers must focus on input resource and patient interchange through the mutual cooperation with local private hospitals and university medical centers.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.120-124
• /
• 2001

A new technique for improving the efficiency of single-phase high-frequency boost converter is proposed. This converter includes an additional low-frequency boost converter which is connected to the main high-frequency switching device in parallel. The additional converter is controlled at lower frequency. Most of the current flows in the low-frequency switch and so, high-frequency switching loss is greatly reduced accordingly Both switching device are controlled by a simple method; each controller consists of a one-shot multivibrator, a comparator and an AND gate. The converter works cooperatively in high efficiency and acts as if it were a conventional high-frequency boost converter with one switching device. The proposed method is verified by simulation. This paper describes the converter configuration and design, and discusses the steady-state performance concerning the switching loss reduction and efficiency improvement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.271-273
• /
• 1995

This paper proposes the efficiency improvement method of vvcf-induction motor drives, which operates always at rated speed, regardless of load conditions, with counter emf estimation. The counter emf is estimated by detecting the fundamental component of motor input current, which is employed in speed control algorithm through the comparison with the actual counter emf during the nonconduction interval. The input power reduction by speed control is confirmed through simulations and experimental results.

• 사물인터넷융복합논문지
• /
• 제7권3호
• /
• pp.9-14
• /
• 2021

본 논문에서는 주택이나 건물의 단열 진단을 통하여 에너지 손실 요인을 발견하고 이에 따른 에너지 효율 개선에 대한 방향을 제시하고 있다. 건축물의 에너지 효율 요소는 단열 진단, 열교 진단, 창호 진단, 기밀 진단, 설비 진단 등으로 구성된다. 에너지 복지 사각지대 주민 및 시설 중 전라남도 나주시에 위치한 한 경로당 건물을 대상으로 하여 에너지 효율 진단을 실시하고 단열 시공을 한 후의 에너지 효율 진단을 실시하였다. 에너지 측정과 진단 및 분석은 IoT 기반 통합 유무선 에너지 진단 플랫폼인 에너지 파인더를 이용하였다. 비교 결과 전체적으로 16.38%의 에너지 절감률을 달성하였다. 연간 단위 면적당 난방 에너지 소요량은 시공 전 333.51kWh에서 시공 후 277.35kWh로 감소되었고, 연간 단위 면적당 냉방 에너지 소요량은 시공 전 5.51kWh에서 시공 후 5.22kWh로 감소되었다. 연간 단위 면적당 1차 에너지 소요량은 시공 전 464.52kWh 였으나 시공 후 403.69kWh로 감소되었으며, 연간 에너지 사용 비용은 시공 전 3,063,307.14원이었으나 시공 후 2,641,072.49원으로 절감되었다. 단열 이외의 에너지 효율에 영향을 미치는 기준들에 대한 추가적인 개선 작업이 필요하다고 판단된다.

• 농촌지도와개발
• /
• 제9권2호
• /
• pp.263-277
• /
• 2002

The objective of this study was to compare the farm efficiency of members of cooperative firms with that of non-members in Korea. Data were collected from 27 farms members of three cooperatives and 13 non-member farms, based on the managerial achievements of 1999. For the analysis, the data were divided into three different farming types: type I and II of member farms and non-member farms. Economic analysis were implemented using DEA(Data Envelopment Analysis). Major findings was as follows. Total average technology efficiency was 0.782, which implies that there still remains 21.8% of improvement possibility. Among the three types, type I showed the highest technology efficiency of 0.9055, while type II and non-member farms showed 0.7670 and 0.7171, respectively. This means that these farms have relatively high potential improved. Also, comparing technology efficiency by dividing into pure technology and scale efficiency, all type of the farms exhibit a higher pure technology efficiency compared to scale efficiency. Therefore, to improve current technology efficiency, farms need to focus more on pure technology efficiency improvement. Meanwhile, profit analysis based on farm size indicate that most of the farms demonstrated the increasing-return-to-scale, which means it is necessary to extend the farm size to improve technical efficiency. Type I member farms achieve higher profit and efficiency than other two types and relatively higher producer prices through introducing cooperative sorting, grading and packing. Also, these labor saving technologies increased farm size.