• Journal of Applied Reliability
• /
• v.14 no.2
• /
• pp.97-102
• /
• 2014

Radar is an object-detection system that uses radio waves to determine the range, altitude, direction, or speed of objects. High power amplifier Module is the most critical part of the high-power radar transmitter systems. It can be used to detect aircraft, ships, spacecraft, guided missiles, motor vehicles, weather formations, and terrain. Research related to radar has been conducted in various fields according to improvement of the communication technology. But only performance-originated technology development has been dashed; study concerning environment duality and safety concerning reliability are still insufficient. In general, radar module is exposed to the outside, on the means of moving or fixed in a certain place. It should be guaranteed sufficient immunity for a variety of environmental stresses that can occur in the outdoor. HALT is a great process used for quickly finding failure mechanisms in a hardware design and product. By applying various kinds and extreme level of stresses, we can find the operating limits of products. In thesis, we conducted HALT test of the high power amplifier modules which used in military and automotive radar. After the test, we analyzed environmental weaknesses of high power amplifier modules using conventional construction data.

• Journal of the Korean Society of Systems Engineering
• /
• v.2 no.2
• /
• pp.45-50
• /
• 2006

Tilting technology is to tilt the train on the curve in order to minimize centrifugal force to passengers and to improve the speed within the limits of passenger's comfort and safety. According to reports from other countries, there is 15~30% speed improvement compared to the conventional trains. Recently, the advent of World-Wide-Web(WWW) and the explosive popularity of the Internet gave birth to collaborative applications which were enabled by computers and networks as their primary media. The progress of 3D computer graphics enabled collaborative applications with 3D virtual environments or distributed virtual environments. In this paper, we explain our implementation of the Share collaboration engine which is for collaboration applications based on a distributed virtual environment. The Share collaboration engine proposes a new Share network architecture for management of participants, and it provides some synchronization methods for 3D objects in virtual collaboration. TTX_PDM is an experimental application that tries to prevent wastes of human, material and time resources in networked virtual collaboration.

• The Journal of Fisheries Business Administration
• /
• v.50 no.3
• /
• pp.17-29
• /
• 2019

This paper aims to find out the problems and improvement direction of quality control and hygiene management of fishery products in Korea. For this reason, we conducted a comparative analysis of quality control and hygiene management of fishing, landing and selling between Japan and Korea, taking mackerel as an example. Japan has established a systematic freshness management system from fishing to landing (production) areas and consumption areas. On the other hand, Korea is not fully lead-managed in the production area after fishing, and is distributed in a state where the quality of the product is deteriorated due to exposure to room temperature. Accordingly, a certain quality can not be secured at the final consumption stage, and sanitary problems occur. In order to improve the quality control and hygiene management of the fishery products, the following needs to be improved. First, we will improve the fishing level freshness management system. Second, we will improve the quality control and hygiene management of fish in the production area and wholesale stage. Third, we will promote the introduction of innovative sales and consignment sales systems at the production stage. Fourth, we will establish a consistent low temperature distribution system from the production area to the wholesale stage from a long-term perspective. Fifth, we will promote the development and education of manuals on fish quality and hygiene management.

• The Journal of Fisheries Business Administration
• /
• v.55 no.1
• /
• pp.37-53
• /
• 2024

In the post-COVID-19, the food industry is rapidly reshaping its market structure toward online distribution. Rapid delivery system driven by large distribution platforms has ushered in an era of online distribution of fresh seafood that was previously limited. This study surveyed 1,000 consumers nationwide to determine their online seafood purchasing behaviors. The research methodology used factor analysis of consumer lifestyle and Heckman's ordered probit sample-selection model. The main results of the analysis are as follows. First, quality, freshness, selling price, product reviews from other buyers, and convenience are particularly important considerations when consumers purchase seafood from online shopping. Second, online retailers and the government must prepare measures to expand seafood consumption by considering household characteristics and consumer lifestyles. Third, it was analyzed that consumers trust the quality and safety of seafood distributed online platforms. It is not possible to provide purchase incentives to consumers who consider value consumption important, so improvement measures are needed. The results of this study are expected to provide implications on consumer preferences to online platforms, seafood companies, and producers, and can be used to establish future marketing strategies.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.665-674
• /
• 2018

In this paper, we propose a development results of a D-type non-rechargeable lithium battery($Li/SOCl_2$) on improvement in a low cost protection circuit of discharge for domestic military power source. According to this study, we describe a new design and product with 8-bit microcontroller in the protection circuit which can estimate state of health of the battery regardless of occurring an initial voltage delay. Also this paper discuss and facilitate development as solution to a safety about the non-rechargeable lithium batteries. As a result, we verified a quality of the protection circuit by a development test and evaluation(DT&E) process.

• Nuclear Engineering and Technology
• /
• v.49 no.1
• /
• pp.224-233
• /
• 2017

In Korea, attempts have been made to develop high strength concrete for the safety and design life improvement of nuclear power plants. In this study, the cracking potentials of nuclear power plant-high strength concretes (NPP-HSCs) containing industrial by-products with W/B 0.34 and W/B 0.28, which are being reviewed for their application in the construction of containment structures, were evaluated through autogenous shrinkage, unrestrained drying shrinkage, and restrained drying shrinkage experiments. The cracking potentials of the NPP-HSCs with W/B 0.34 and W/B 0.28 were in the order of 0.34FA25 > 0.34FA25BFS25 > 0.34BFS50 > 0.34BFS65SF5 and 0.28FA25SF5 >> 0.28BFS65SF5 > 0.28BFS45SF5 > 0.28 FA20BFS25SF5, respectively. The cracking potentials of the seven mix proportions excluding 0.28FA25SF5 were lower than that of the existing nuclear power plant concrete; thus, the durability of a nuclear power plant against shrinkage cracking could be improved by applying the seven mix proportions with low cracking potentials.

• YAKHAK HOEJI
• /
• v.57 no.6
• /
• pp.432-441
• /
• 2013

It's been almost 20 years since the adoption of Good Manufacturing Practices (GMP) in Korea since 1994. There have been big progresses in the GMP regulations and its implementations. 'New GMP' in 2008 has adopted validation, pre-approval GMP evaluation, annual quality review, etc.. Upon the submission of PIC/S (Pharmaceutical Inspection Cooperation Scheme) application by Korea's Ministry of Food and Drug Safety in April, 2012, Korea is facing new opportunity to level up Korea GMP regulations. As such, this study suggested GMP revision points by comparing and analyzing the differences between PIC/S GMP and Korea GMP. Those areas which GMP is not required such as radiopharmaceuticals and medical gases should adopt GMP. And independent GMP regulation is needed for Active Pharmaceutical Ingredients and investigational medicinal products. Also, those regulations shall be implemented in the higher level of legal status. Finally, rather than pursuing GMP harmonization only for PIC/S membership, GMP improvement in the long term shall be taken into consideration by reflecting current quality issues such as ICH Q8 (Pharmaceutical development), Q9 (Quality Risk Management) and Q10 (Pharmaceutical Quality System).

• International Journal of Reliability and Applications
• /
• v.11 no.1
• /
• pp.55-67
• /
• 2010

There has been a recent upsurge in demand for the improvement of car reliability in the Northern American which is the primary market of South Korea automobile industry. It has been required that the warranty for transmission control unit for passenger cars directly related to passenger safety or security should be extended for 10 years and 160,000 km. In this paper, the test method for reliability and evaluation criteria is presented to evaluate the reliability on the automatic transmission controller. Reliability certification test can be roughly divided into two types: a quality test and life assessment test and a quality test can be subdivided into a basic performance test and environmental resistance test. There are 3 types of tests on the performance test for automatic transmission controller and environmental resistance test is composed of 14 items. Life test is performed with only the product passed this quality test. In this study, operation limit test at the high-temperatures, accelerated life test under specific temperature and accelerated life test for 2 or 3 stress levels are shown as a way for life test.

• Convergence Security Journal
• /
• v.3 no.1
• /
• pp.23-30
• /
• 2003

As IT industries grow rapidly, many kinds of problems related to information security have gained force. Demands for information security products such as firewall, Intrusion Detection System have grown and the reliability and the safety of information security products is gathering strength. The evaluation for information security products is putting in operation, but developers have a difficulty in timely presenting their products due to long time for the evaluation. In this paper, we suggest the efficient elevation method for information security product by improving the development process in order to meet the assurance requirements of the Common Criteria.

• Korean Security Journal
• /
• no.36
• /
• pp.255-292
• /
• 2013

Burglary (also called breaking and entering and sometimes housebreaking) is a crime, the essence of which is illegal entry into a building for the purposes of committing an offence. It is one of the most common types of crime and also a serious issue for every society. A house that is left insecure is an accessible and attractive target for burglars and therefore burglary resistance test & certification system for doors and windows has been developed in many countries. This paper explores several advanced foreign burglary resistance test/certifcation cases (the British SBD, the Dutch KOMO SKH/SKG, the Japanese CP mark, the Australian Standard Certification) for security products and domestic test/certification systems for fire safety products as a comparative study so that any improvement points can be gained for South Korea in the field of security product performance. The comparative analysis results show that South Korea is far behind the security product certification system and needs a lot of improvement in the system by benchmarking foreign cases. The domestic test/certification systems for fire safety products also give some insights for burglary-related security products' performance certification system in Korea. Overall, the need for relevant rules and regulations, the establishment of standards regarding testing and certification, including certified security +hardware product in building security certification system, performance testing as well as production testing (i.e. quality management system evaluation), the basic competency of testers, incentive system for certified/high quality security products were suggested in order to make an optimal model for the security production performance testing and certification system in Korea.