• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.63-64
• /
• 2012

• Journal of Arbitration Studies
• /
• v.27 no.2
• /
• pp.83-105
• /
• 2017

In contemporary society interest in and consumption of beauty treatment are increasing, raising interest in health and beauty. However, beauty-related laws are becoming factors of hindrance of beauty development. Currently the Public Health Control Act plays a basic role in the beauty art business in Korea, However the contents are in discord with international laws and its definition is not clear. Therefore it is causing conflicts of different occupations and job associations which are similar to art business. Especially, because neither definitions nor policies on beauty care devices exist in the Public Health Control Act, beauty care devices using in foreign countries cannot be used in Korea due to classification as medical devices. Under this circumstance, therefore, beauty care device uses by beauty artists violate the law. The government has tried to solve these irrational regulations. Recently, the Small and Medium Business Administration announced 'the improvement plan of small business and young founders site regulation for public economy recovery' in a ministerial meeting on December 28, 2016. Regulations on policy preparation for skincare devices were inclusive in this announcement. It is the question whether the regulations will be executed or not. Even though beauty industrial competitiveness was presented in the 18th Presidential Council on National Competitiveness in 2009, it was not practiced. The proposal bills for beauty law improvement have been put forth several times since 2000 including an improvement plan for regulating beauty care devices. However, so far there have been no improvements. The damage on the regulation classifying beauty devices as medical devices is not only restricted to skincare. This develops beauty devices and the beauty industry which imports and exports beauty devices. When beauty devices are exported, complicated procedures are unavoidable and when beauty devices are imported, irrational problems like reregistration procedures and costs occur. The reason why an improvement plan has not gone into practice is the resistance of the dermatologists' association. Dermatologists tend to stand positively against harming public health by saying that beauty devices used by beauty artists cause people to suffer side effects. In contrast, anyone who has a licence to use beauty devices is able to use them in foreign countries. It is not only infringement of one's right as a beauty artist but also people's right to receive beauty care services. With this reason, Korean's current law under which beauty devices are ruled as medical devices should be revised with accordance to domestic surroundings. Therefore in order to advance and globalize the beauty industry, the support and cooperation of the Korean government and relevant associations is needed to legislate and revise the beauty devices laws. The relevant associations abandon regional self-centeredness and cooperate to define ranges, size and management of beauty devices for safe use. If no collaboration exists, an arbitration agency should be established to solve the problem.

• Korean Journal of Oriental Medicine
• /
• v.11 no.1
• /
• pp.119-125
• /
• 2005

We conduct a survey of actual condition of medical devices in korea traditional medicine on 157 oriental medicine doctors and 183 manufacturers. The 61% percent of doctors indicate the trouble in use of medical devices which is applied to korea traditional medicine. The manufacturers replied that devices have a problem with diagnosis(53%) and treatment(36%). To overcome these problems, it is necessary to develop devices based on the study of basic oriental medicine and the reliable clinical research. This study contributes the improvement of quality and the revision of rules on medical devices.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.1
• /
• pp.23-28
• /
• 2015

This study is to investigate the accessibility compliance status of smart devices for people with disabilities in the information age, smart and offer improvements. Vision of smart devices, operating systems (IOS, Android, Windows) based smart devices currently in use by most, hearing, investigation and provide handicapped accessibility status and improvement measures derived from a comparative analysis of the Disabled Accessibility Improvement of smart devices was presented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.67-67
• /
• 2011

Compound semiconductor/CNTs composites have shown considerably improved efficiency improvement in photovoltaic devices, which is often attributed to two different factors. One is the formation of efficient electronic energy cascade structures. The other effect of CNTs on the performance of photovoltaic devices is the decrement of interfacial resistance. The interfacial resistances at n-type/ p-type materials and/or n-type materials/TCO electrode are reduced by an outstanding electrical property of CNTs. In addition to the effects of CNTs, we report the third reason for increment of efficiency in photovoltaic devices by CNT's well-known electrical field enhancement effects. The improved ${\beta}$ values in reverse-FE currents of CIGS electrode with SWNTs layers indicate the enhancement of electrical field in photovoltaic devices, which implies the acceleration of the electron transfer rate in the cell. Due to the formation of an efficient electronic energy cascade structure and the decrease of the interfacial resistance as well as the improvement of the electrical field in the photovoltaic devices, the power conversion efficiency of electrochemically deposited superstrate-type CIGS solar cells was increased 24.3% in the presence of SWNTs and showed 10.40% conversion efficiency.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.66-75
• /
• 2021

As the domestic aviation industry develops, demand for pilots is increasing. As a result, the demand for flight training using flight simulation training devices that implement the same or similar interior of aircraft is also increasing. Despite this increase in demand, domestic laws, regulations and management systems related to flight simulation training devices have remained unchanged since 2009. As a result, the criteria for designation of new or developed flight simulation training devices are ambiguous. In addition, proper improvement of the current system should be prioritized for designation of new devices such as UAM and VR, along with developing flight simulation training devices. It is intended to present measures to improve the domestic flight simulation training system by investigating and analyzing advanced cases overseas.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.90-97
• /
• 2002

In this paper we study the performance test items and improvement plans of surge protective devices for low-voltage power circuits used in railway system. Above of all, the sources of electromagnetic interference in railway system are researched. And then we compared domestic railway standard with IEC and IEEE standards far the test items and methodologies of surge protective devices. Through the investigations, we found that the domestic standard is behind in the number of test items and methods on surge protective devices. As the countermeasures, we suggest removing component tests of surge protective devices, separating standards for power and signal standards, and using international surge waveform. In applying to domestic railway surge protective devices, surge limiting voltage measuring and surge endurance tests by international standard methods are good result.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.3
• /
• pp.89-100
• /
• 2023

Recently, on-device artificial intelligence (AI) solutions using mobile devices and embedded edge devices have emerged in various fields, such as computer vision, to address network traffic burdens, low-energy operations, and security problems. Although vision transformer deep learning models have outperformed conventional convolutional neural network (CNN) models in computer vision, they require more computations and parameters than CNN models. Thus, they are not directly applicable to embedded edge devices with limited hardware resources. Many researchers have proposed various model compression methods or lightweight architectures for vision transformers; however, there are only a few studies evaluating the effects of model compression techniques of vision transformers on performance. Regarding this problem, this paper presents a performance evaluation of vision transformers on embedded platforms. We investigated the behaviors of three vision transformers: DeiT, LeViT, and MobileViT. Each model performance was evaluated by accuracy and inference time on edge devices using the ImageNet dataset. We assessed the effects of the quantization method applied to the models on latency enhancement and accuracy degradation by profiling the proportion of response time occupied by major operations. In addition, we evaluated the performance of each model on GPU and EdgeTPU-based edge devices. In our experimental results, LeViT showed the best performance in CPU-based edge devices, and DeiT-small showed the highest performance improvement in GPU-based edge devices. In addition, only MobileViT models showed performance improvement on EdgeTPU. Summarizing the analysis results through profiling, the degree of performance improvement of each vision transformer model was highly dependent on the proportion of parts that could be optimized in the target edge device. In summary, to apply vision transformers to on-device AI solutions, either proper operation composition and optimizations specific to target edge devices must be considered.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.4
• /
• pp.466-474
• /
• 1998

In the present study, the improvement of absorption characteristics by installing insert devices, such as spring and wire screen, inside the vertical tube absorber were studied experimentally. Momentum, heat and mass transfer rate in the absolution process of smooth bare tube, smooth tube with spring-insert, and with wire screen-insert were compared and analysed in range of film Reynolds number of 40∼200. The improvement of heat transfer rate by spring-insert and screen-insert were remarkable especially in the low Reynolds number region. As the mesh number increased in screen-insert and as the pitch decreased in spring-insert, Nusselt and Sherwood number increased. Degradation of mass transfer by non-absorbable gas showed similar qualitative trends regardless of the insert type.

• Korean Journal of Acupuncture
• /
• v.40 no.4
• /
• pp.194-205
• /
• 2023

Objectives : This study investigated the current utilization status of thermotherapy devices in Korean medicine (KM) institutions and identified areas for improvement and further development, as perceived by KM doctors (KMDs). Methods : An online survey was conducted, targeting KMDs primarily engaged in clinical patient care. The questionnaire included items about respondents' clinical practices, the extent of thermotherapy device usage, their opinions on these devices, and perceived improvement needs. The collected data underwent quantitative analysis. Results : From the 1,025 respondents, data from 862 respondents who provided complete responses were analyzed. On average, respondents utilized thermotherapy treatments for 80% of their patients. Infrared (IR) phototherapy unit, electrical moxibustion apparatus, and heater-based thermotherapy devices were predominantly owned by respondents, with IR being the most frequently used. The average satisfaction score for current thermotherapy devices was 79. A significant concern raised was the necessity for improved health insurance coverage and efficacy evaluation. Conclusions : This research has confirmed that the extensive use of thermotherapy devices by KMDs in treating primarily musculoskeletal and gastrointestinal ailments - common conditions among patients in KM institutions. The main areas identified for improvement encompass safety, cost-effectiveness, and device efficacy. Future enhancements in thermotherapy devices should address these crucial aspects.