• 한국의료질향상학회지
• /
• 제21권1호
• /
• pp.80-95
• /
• 2015

Objectives : A safety culture is the bedrock for all patient safety improvement initiatives; thus, many resources have been invested in measuring hospital culture. However, many of these endeavors have failed to yield meaningful results. This article proposes a practical checklist to ensure successful administration of a safety culture survey and describes current methodologies for analyzing survey results to develop safety improvement programs. Methods : We reviewed currently used safety culture surveys and summarized their strengths and weaknesses. We also reviewed studies using safety culture surveys and found several pitfalls leading to failure in survey administration. With this information, we developed a checklist that covers critical items in the survey process. We also reviewed newly developed methodologies for survey results analysis and application and described them using the Korean version of the Safety Attitudes Questionnaire as an example. Results : The checklist consists of three steps: survey preparation, administration, and analysis and application. Each step contains clear action items. The content even describes how to get buy-in from hospital executives and manage communication channels with them. Also, common misunderstandings regarding survey scores are described and possible solutions are suggested. In the analysis section, we demonstrate new methods for obtaining more accurate survey results and how to utilize these methods to develop and implement hospital-wide safety improvement programs. Conclusion : A successful safety culture survey is the foundation of all future safety improvement projects. This review is intended to guide hospitals in enhancing safety.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권1호
• /
• pp.103-108
• /
• 2016

Carbon Capture and Storage technologies are recognized as key solution to meet greenhouse gas emission standards to avoid climate change. Although MEA (monoethanolamine) is an effective amine solvent in $CO_2$ capture process, the application is limited by high energy consumption, i.e., reduction of 10% of efficiency of coal-fired power plants. Therefore the development of new solvent and improvement of $CO_2$ capture process are positively necessary. In this study, improvement of $CO_2$ capture process was investigated and applied to Test Bed for reducing energy consumption. Previously reported technologies were examined and prospective methods were determined by simulation. Among the prospective methods, four applicable methods were selected for applying to 0.1 MW Test Bed, such as change of packing material in absorption column, installing the Intercooling System to absorption column, installing Rich Amine Heater and remodeling of Amines Heat Exchanger. After the improvement construction of 0.1 MW Test Bed, the effects of each suggested method were evaluated by experimental results.

• 대한본초학회지
• /
• 제32권3호
• /
• pp.9-17
• /
• 2017

Objectives : Kyeongok-go has the effect of antioxidant, anti-cancer, improving fatigue, and hyperlipidemia, but it is not easy to use in clinical practice becausee of the complicated manufacturing process of heat control and moisture control. The aim of this study was to explore the lipid improvement effect of new manufacturing methods prodeced Kyeongok-go in hyperlipidemia rats. Methods : The SD rats were divided randomly into 8 groups of six animals each : Normal rats (Nor), hyperlipidemia rats (Con), hyperlipidemia rats treated with Spirulina 60 mg/kg(SP60), hyperlipidemia rats treated with Commercial Kyeongok-go 1 g/kg (K0), hyperlipidemia rats treated with Kyeongok-go manufactured by heating mantle 1 g/kg (K1), hyperlipidemia rats treated with ginseng fermentation Kyeongok-go 1 g/kg (KF), hyperlipidemia rats treated with Kyeongok-go with black ginseng 1 g/kg (BK), hyperlipidemia rats treated with black ginseng fermentation Kyeongok-go 1 g/kg (BKF). The experimental group induced hyperlipidemia by eating high cholesterol diet for 8 weeks. Also, we compared Kyeongok-go manufacturing method using the new method compared with traditional method. Results : As a result, the improvement effect of hyperlipemia using the new method showed the similar or better improvement effect compared with the conventional method, and it is considered that the Kyeongok-go manufacturing method using the new method can be substituted for the traditional Kyeongok-go manufacturing method. Conclusion : In conclusion, these results suggest that new manufacturing methods prodeced Kyeongok-go has the potential as a anti-hyperlipidemia material which possess lipid improvement activities.

• 한국수자원학회논문집
• /
• 제40권7호
• /
• pp.503-510
• /
• 2007

현재 하천정비는 하천생태계에 초점을 맞추고 자연하천에 근접할 수 있는 공법을 사용하는 자연 친화적인 하천정비가 비약적으로 늘어나고 있다. 하지만 자연 친화적인 하천정비는 아직까지 많은 기술이 축적되지 않아 어떤 공법이 하천환경에 적합한 공법인지가 확립되어 있지 않은 상태이다. 또한, 값비싼 공법을 적용하여 하천을 자연 친화적으로 정비하였다. 하더라도 하천정비에 대한 종합적인 평가방법이 확립되어있지 않아 자연 친화적 하천정비에 대한 타당성을 객관화하지 못하고 있다. 따라서 하천환경기능을 포함한 종합적이고 다양한 평가방법을 개발하여 정비하천에 대한 평가를 수행할 필요가 있다. 본 연구에서는 자연 친화적으로 정비된 하천에 대해 정비의 타당성과 효율성을 평가하는 평가방법에 대해 연구하였다. 전라북도 순창읍에 있는 경천을 대상으로 2000년${\sim}$2000년 월별로 모니터링을 수행하여 자료를 수집하였으며, 수집된 자료를 분석하여 하천환경기능을 종합적으로 고려할 수 있는 방법으로서 하천자연도 평가, 전 과정 평가, 어메니티 평가, 경제적 편익 평가 등의 평가방법을 개발하였다. 본 연구에서 개발한 4가지의 평가방법은 하천정비사업의 종합적이고 정량적인 평가를 수행할 수 있는 방법으로 판단된다. 하지만 하나의 하천을 대상으로 개발된 방법을 적용하였기 때문에 차후 각 하천마다 갖는 특성을 고려하여 하천정비의 평가방법이 요구된다.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1376-1383
• /
• 2001

Meshless methods, developed in various ways over the past decade, have been attractive as new computational methods in that they do not need mesh generation in analyzing procedure. But most of these methods were not truly meshless methods because background meshes were required for the spatial integration of a weak form. Accordingly, in this paper, nodal integration for truly meshless methods has been studied, and an improvement scheme is proposed. To improve stabilization and accuracy, which are the weak points in previous nodal integration methods, the integration area is transformed to circle and then numerically integrated. This method does not need any adding term for stabilization in the variational formulation and then simplifies the integration procedure. Numerical test results show that the proposed method is more accurate, stable, and reasonable than the existed nodal integration methods.

• 대한음성학회지:말소리
• /
• 제52호
• /
• pp.145-160
• /
• 2004

In this paper, a new noise compensation method based on the eigenvoice framework in feature space is proposed to reduce the mismatch between training and testing environments. The difference between clean and noisy environments is represented by the linear combination of K eigenvectors that represent the variation among environments. In the proposed method, the performance improvement of speech recognition systems is largely affected by how to construct the noisy models and the bias vector set. In this paper, two methods, the one based on MAP adaptation method and the other using stereo DB, are proposed to construct the noisy models. In experiments using Aurora 2 DB, we obtained 44.86% relative improvement with eigen-environment method in comparison with baseline system. Especially, in clean condition training mode, our proposed method yielded 66.74% relative improvement, which is better performance than several methods previously proposed in Aurora project.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1477-1478
• /
• 2004

Science the change of development methods and environment of the software is rapidly kept going in industry, previous manual test methods will not be able to guarantee the quality of software. Therefore the software test automation tools is being developed actively. And many of the tools which is reliable is applied and used in domestic organizations. Indirect test techniques currently are used For the improvement of the software quality, such as formal specification and design, structural programming. And also the various do direct test techniques are used to the measurement of software quality through the fault detection and modification, such as black box, which box and test automation tools. In this survey, the software test automation tools which predicate and access the software quality at the software development phase for the improvement of the software quality should be introduced.

• Applied Microscopy
• /
• 제41권1호
• /
• pp.75-79
• /
• 2011

For quantitative analysis of nano-crystal structure, we reported the accuracy improvement method of lattice parameters measured from electron diffraction. For calculation of Au lattice parameters used as a standard crystal structure, it was considered two different acquisition methods (detector and enegy-filter) and three different calculation methods (conventional, least-square and regression fit). As a result, the measurement reliability could be enhanced by using CCD camera which gives higher performance, while energy-filtering did not affect the improvement the camera constant accuracy. Also, the accuracy of lattice parameters could be improved up to $10^{-4}$ order by regression fitting with correction formula. Finally, it is expected that the combination of regression fitting and intensity extraction from energy-filtered precession electron diffraction gives a solution of quantitative structure analysis for unknown nano-crystals.

• Journal of Welding and Joining
• /
• 제26권4호
• /
• pp.55-60
• /
• 2008

Structural reliability of electrical panels installed in naval vessels is of critical importance from structural performance viewpoint. The panels may be exposed to vibration and fatigue loadings from internal and external sources and wave loading which cause fatigue cracking. In this study, common methods such as burr grinding and post weld heat treatment (PWHT), for the fatigue strength improvement of weldments are investigated. Burr grinding is carried out using a electric grinder in order to remove surface defects and improve the weld bead profile. And also PWHT is carried out for the purpose of removing residual. The effectiveness of the two post treatment methods is evaluated in terms of fatigue strength improvement of welded structures.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권4호
• /
• pp.30-38
• /
• 2021

This research explored methods for improvements to be made within the field of drone usage within the construction industry based on an investigation of factors which limit their efficiency and productivity. Limiting factors and improvement measures were presented in terms of technology, service, law and policy for employing drones at construction sites. Our first suggestion is, from a technical point of view, that companies need to expand professional manpower and infrastructure for systematic management. Second, in terms of service expansion, it is necessary to have management capabilities for operation such as the use of drones with enhanced safety and reinforced on-site education and personal information management. Third, in terms of legal and institutional support measures, it is necessary to prepare a plan for reforming the legal system for revitalization and to expand the training of professional manpower. This study may contribute not only to the development of drone technology, but also to effectively respond to various problems that appear at construction sites.