• Journal of the Korea Society of Computer and Information
• /
• v.6 no.2
• /
• pp.84-89
• /
• 2001

In this paper, an improved protocol of Multi-Link Switching Method is proposed by supplementing a concurrent processing function. This protocol is proposed to complement the shortcomings of the conventional Multi-Link Switching Method which is used for the medium access in LAN. We analyzed the improved protocol in channel utilization viewpoint and compared the result with that of the conventional protocol From this result, we showed that the channel utilization of the improved protocol is superior to that of the conventional protocol when the maximum normalized propagation delay is increased.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.111-115
• /
• 2002

The objective of this work is to develop improved slip factor model and correction method to predict flow through impeller in forward-curved centrifugal fan by investigating the validity of various slip factor models. Both steady and unsteady three-dimensional CFD analyses were performed with a commercial code tn validate the slip factor model and the correction method. The results show that the improved slip factor model presented in this paper could provide more accurate predictions for forward-curved centrifugal impeller than the other slip factor models since the presented model takes into account the effect of blade curvature. The comparison with CFD results also shows that the improved slip factor model coupled with the present correction method provides accurate predictions for mass-averaged absolute circumferential velocity at the exit of impeller near and above the flow rate of peaktotal pressure coefficient.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.6
• /
• pp.506-509
• /
• 2005

This paper presents the improved burn-in method for the reliability of SRAM in Multi Chip Package (MCP). Semiconductor reliability is commonly improved by the burn-in process. Reliability Problem is very significant in the MCP which includes over two chips in a package because the failure of one SRAM chip has a large influence on the yield and quality of the other chips such as Flash Memory, DRAM, etc. Therefore the quality of SRAM must be guaranteed. To improve the qualify of SRAM, we applied the improved wafer level burn-in process using multi cell selection method in addition to the previously used methods and it is found to be effective in detecting particular failures. Finally, with the composition of some kinds of methods, we achieved the high quality of SRAM in MCP.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.2
• /
• pp.49-58
• /
• 2012

This paper is on an improved orthogonal projection method which can cancel the acoustic feedback signals in the digital hearing aids. Comparing with the NLMS algorithm which is widely used for simplicity and stability, it shows that this method has the improvement of the convergence performances, and has small computational quantities, for signals with the large auto-correlation as speech signals. This uses the improved orthogonal projection algorithm which reduces the correlation of signals. To verify the convergence characteristics of the proposed algorithm, we simulated about various input signals. The acoustic feedback canceller has a 12-bit resolution with 64-tap adaptive FIR filter. And we compared the results of simulation for this algorithm with the ones for the NLMS algorithm. By these works, it is proved that the feedback canceller adopting the proposed algorithm shows about 3.5dB more high SNR than the NLMS algorithm in the colored input signals.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.3
• /
• pp.27-36
• /
• 1998

This work has improved the method of Kim and Gal's (6) in that of requiring less response of the DM(decision maker) and ease of reply. The underlying notion is the MCDC(maximally changeable dominance cone) for describing all efficient solutions under the particular preference structure. According to the DM's partial preference expression, enlarging the MCDC is achieved, which results in reducing the solutions needed to take into consideration. The cone generators corresponding to the DM's response are added to the MCDC, which results the MCDC is enlarged. Adopting the scheme of pairwise comparison as a means of acquiring preference attitude, an improved interactive method is proposed. And also, a scheme of choosing a reference point is suggested to achieve the computational efficiency.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.157-173
• /
• 2015

In the present study, the existing equivalent stain method is improved to make up for its weaknesses. The improved inherent strain model is built considering more sophisticated three dimensional constraints which are embodied by six cubic elements attached on three sides of a core cubic element. From a few case studies, it is found that the inherent strain is mainly affected by the changes in restraints induced by changes of temperature-dependent material properties of the restraining elements. On the other hand, the degree of restraints is identified to be little influential to the inherent strain. Thus, the effect of temperature gradients over plate thickness and plate transverse direction normal to welding is reflected in the calculation of the inherent strain chart. The welding deformation can be calculated by an elastic FE analysis using the inherent strain values taken from the inherent strain chart.

• ETRI Journal
• /
• v.42 no.5
• /
• pp.799-804
• /
• 2020

Network security situation prediction is difficult due to its strong uncertainty, but DS evidence theory performs well in solving the problem of uncertainty. Based on DS evidence theory, this study analyzed the prediction of the network security situation, designed a prediction model based on the improved DS evidence theory, and carried out a simulation experiment. The experimental results showed that the improved method could predict accurately in the case of a large conflict, and had strong anti-jamming abilities as compared with the original method. The experimental results prove the effectiveness of the improved method in the prediction of the network security situation and provide some theoretical basis for the further application of DS evidence theory.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.12
• /
• pp.159-166
• /
• 2001

Recently, high story apartments are common to solve a housing problem especially in major cities. Apartments are considered as clean, sanitary and convenient to live. However, There are some problems because residents share walls, floors and ceilings with other people. Thus, the residents are often disturbed by neighbours since sound travels the building elements. Especially, impact noise through the floors causes the many complains. And so, it has been drawn attention to isolate by the impact sound. The purpose of this study is to analyze the characteristics of vibration response of 12-type void slabs in the improved void slab by impedance method, and is to find the best improveds void slab on the 12-type void slabs.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.2
• /
• pp.27-34
• /
• 1999

The growth-strain method was used for shape optimization, which carries out the optimization by distributing uniformly the distributed parameter such as von Mises stress and shear strain energy density. Shape optimization is carried out by iteration of stress analysis and growth strain analysis. In this study, the effect of growth ratio in the method was investigated and then the range of the adequate value of the growth ratio was determined. Also the growth-strain method was improved by applying the linear PID control theory in order to control volume required by a designer. Finally, an automatic shape optimization system was built up by the improved growth-strain method with a commercial software using finite element method. The effectiveness and practicability of the developed shape optimization system was verified by some examples.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.17 no.3
• /
• pp.29-35
• /
• 1980

With installation of the computerized data acquisition system on the towing carriage of KRIS towing tank, the testing techniques of resistance test, propeller open-water test, self-propulsion test and wake survey at propeller disk were remarkably improved and automated. For the self-propulsion test a new method was developed with aid of a digital desk-top computer. This method is based on extracting advantages both from British method and Continental method, that is, the accuracy from the constant speed method and the effciency from the constant load method. The KRIS method has been successfully practized with the improved accuracy, stability and efficiency. Details of the new method are described in this paper.