• 농업과학연구
• /
• 제44권1호
• /
• pp.23-29
• /
• 2017

This study was conducted to explore which pollen type could be an effective pollen source for self-incompatible 'Niitaka' pear (Pyrus pyrifolia Nakai), when different pollinizers were to be applied. The pollens of five different pears with similar flowering times were applied to bagged 'Niitaka' flowers grown in Cheonan city, Korea. Pollen types used were of different origins including Korean pears ('Wonhwang' and 'Chuhwangbae'), Japanese pears ('Chojuuro' and 'Okusankichi'), and Chinese pear ('Yali'). Results show that the amount of pollen produced by flowers of each cultivar was the largest in Korean pear 'Wonhwang' (234 g/100 flowers) and the smallest in Japanese pear 'Okusankichi' (126 g/100 flowers). A high proportion of large fruits (> 600 g), 71.4% of total production, was found in the fruits treated with 'Yali' pollen. However, these fruits showed an unfavorable external appearance. Based on individual fruit width differences, 'Chojuuro' treatment produced the smallest difference in fruit diameters (3.2 mm) and 'Yali' treatment' gave the largest (4.8 mm). Also, the difference in fruit length was the largest in 'Yali' (7.5 mm), which also produced the most uneven fruits among the pollinizers used. Meanwhile, the use of pollens of 'Wonhwang' and 'Chuhwangbae' improved productivity by increasing the fruit shape index and the ratio of bigger fruits in total production. Moreover, those pollens also decreased the development of lenticels on fruit skins which gave them a smoother appearance.

• 복식
• /
• 제5권
• /
• pp.7-11
• /
• 1981

In the vast extent of time, man and his ancestors have existed on earth about 2,000,000 years. For Near-Man, they knew how to make fire and protected themselves with hairs. Old-Man covered their bodies with the skins of wild animals. New Man improved the quality, the range and ingenuity, so they fabricated clothes with the animal skins. New Man is considered as ancestor of Modern Man. They had spread widely over the earth to take advantage of their surroundings. The next period, New Stone Age was chiefly distinguished by agricultural age. He was now about to make clothes from natural fibers. The two most obvious orgins of clothing are to protect the body against environment and to decorate the body. The forms of clothing were different from the various climates and regions they had settled, for example Yo-po Hyung (Apron), Kwae-po Hung (Sewn garment), Kwan-doo Hyung (Poncho), Chun-kae Hyung (Frontopend garment), Chai-hyung Hyung (Body-conforming shape). Our ancestor had moved from Baikal Lake, Central Asia toward northeast; Shun-tung in China, Manchuria and at last Han Panninsula. Considering our basic costume of ancient times were Yu(jacket), Ko(trousers), Sang(skirt), Po (coat) with the accessories of Kwan (crown), Mo (hat), Dai (belt), Hwa, Eie (footwear), here I conjecture our costume of prehistoric period was Chaihyung Hyung(Body-conforming shape) in the purpose of body covering.

• Structural Engineering and Mechanics
• /
• 제38권3호
• /
• pp.261-281
• /
• 2011

A new method of formulation of a class of elements that are immune to mesh distortion effects is proposed here. The simple three-noded bar element with an offset of the internal node from the element center is employed here to demonstrate the method and the principles on which it is founded upon. Using the function space approach, the modified formulation is shown here to be superior to the conventional isoparametric version of the element since it satisfies the completeness requirement as the metric formulation, and yet it is in agreement with the best-fit paradigm in both the metric and the parametric domains. Furthermore, the element error is limited to only those that are permissible by the classical projection theorem of strains and stresses. Unlike its conventional counterpart, the modified element is thus not prone to any errors from mesh distortion. The element formulation is symmetric and thus satisfies the requirement of the conservative nature of problems associated with all self-adjoint differential operators. The present paper indicates that a proper mapping set for distortion immune elements constitutes geometric and displacement interpolations through parametric and metric shape functions respectively, with the metric components in the displacement/strain replaced by the equivalent geometric interpolation in parametric co-ordinates.

• Steel and Composite Structures
• /
• 제8권4호
• /
• pp.313-328
• /
• 2008

This study attempts to suggest bending reinforcement method by applying bending reinforcement to composite profile beam in which the concept of prefabrication is introduced. Profile use can be in place of framework and is effective in improvement of shear and bending strength and advantageous in long-term deflection. As a result of experiment, MPB-CB2 with improved module had higher strength and ductility than the previously published MPB-CB and MPB-LB. In case of bending reinforcement with deformed bar and built-up T-shape section based on MPB-CB2, the MPB-RB series reinforced with deformed bar were found to have higher initial stiffness, bending strength and ductility than the MPB-RT series. The less reinforcement effect of the MPB-RT series might be caused by poor concrete filling at the bottom of the built-up T-shape. In comparison between theoretical values and experimental values using minimum yield strength, the ratio between experimental value and theoretical value was shown to be 0.9 or higher except for MPB-RB16 and MPB-RT16 that have more reinforcement compared to the section, thus it is deemed that the reinforced modular composite profiled beam is highly applicable on the basis of minimum yield strength.

• 지구물리와물리탐사
• /
• 제5권2호
• /
• pp.93-98
• /
• 2002

"이산적으로 정의된 수평단면으로부터 광체의 3차원 형태를 생성하는 3D Modeler"시스템을 사용하여 국내의 한 광산에서 개발중인 실제 광체의 모델링을 수행하였다. 이 프로그램을 사용하면 다양한 공간정보를 쉽게 종합하여 모델링을 할 수 있다. 모델링의 결과는 인접한 단면사이를 연결하는 제어점들의 설정에 크게 좌우된다. 제어점의 설정은 단면간의 기하학적 유사성과 광체의 지질학적인 특성 등을 고려하여 작성한다. 작성된 모델은 광체를 3차원적으로 도시하거나 또는 임의의 단면을 추출하여 검토할 수 있으며 이 단면을 수정하여 다시 모델링함으로써 점진적으로 사용자가 원하는 형태의 모델을 구축할 수 있다.

• 한국추진공학회지
• /
• 제6권2호
• /
• pp.65-74
• /
• 2002

전압력 회복율을 최대로 하기 위한 IRR형 램젯 공기 흡입구 초음속 확산부의 최적형상 설계를 수행하였다. 질량유량을 제약조건으로 고려하고 외부램프에서의 두 번째 경사충격파와 카울립 형상, 그리고 흡입구 목의 단면적을 설계변수로 선택하였다. 효율적인 최적화를 위해 설계변수 변환을 통한 개선된 반응면 기법을 사용하였으며 설계반복을 통해 높은 신뢰도의 반응면을 구성할 수 있었다. 최적화 기법으로 유전자 알고리즘을 사용하였으며, 이차원 Euler Code를 사용하여 공력해석을 수행하였다. 배압조건의 적용을 위해 흡입구 목 뒤로 가상의 노즐을 장착하였고 총 20회의 계산으로 종말충격파 이후의 전압력 회복율이 기준형상에 비하여 14% 향상된 초음속 확산부 최적형상을 설계할 수 있었다.

• 한국재료학회지
• /
• 제18권3호
• /
• pp.137-142
• /
• 2008

Blue-emitting BAM:Eu phosphor powders were formed by post-treatment of precursor powders with hollow or dense morphologies. The morphologies of the precursor powders obtained by spray pyrolysis were controlled by changing the preparation conditions and by changing the type of spray solution. The effects of the morphologies of the precursor powders on the characteristics of the BAM : Eu phosphor powders reacted with $AlF_3$ flux were investigated. Precursor powders with a spherical shape and a hollow morphology produced BAM : Eu phosphor powders with a plate-like morphology, a fine size and a narrow size distribution. On the other hand, precursor powders with a spherical shape and dense morphology produced BAM : Eu phosphor powders with a plate-like morphology and a large size. $AlF_3$ flux improved the photoluminescence intensities of the BAM : Eu phosphor powders. The photoluminescence intensity of the fine-sized BAM : Eu phosphor powders with a plate-like morphology was 90% of the commercial product under vacuum ultraviolet conditions.

• 설비공학논문집
• /
• 제28권9호
• /
• pp.350-354
• /
• 2016

Although fibrous insulations are generally used with resistive insulation type, metallic insulation is proper matter to satisfy low head-loss and equipment life when considering the specific condition, especially for Nuclear power plant. Common insulation is resistance insulation with a low thermal conductivity. but RMI is made of sheet plate with low emissivity and closed air space. Thermal radiation is blocked by stainless steel with low emissivity. Thermal conductivity and thermal convection are blocked by closed air space. This study shows the changes and effects of the heat loss according to shape and method of stacking sheet plates inserted into the insulation and analyzed the most optimized way for thermal insulation performance. The result shows that using sheet plate structure through raised and protruding shape processing was the appropriate model to optimize thermal performance. Additionally, insulating performance of RMI improved by placing the sheet plate in a high temperature region intensively.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.577-582
• /
• 2003

In generally, under the influence of over-pressure drop, serious problems such as cavitation, choked flow, flashing and vibration has been coming around the tilting disk check valve. A PIV experiment to examine the cause of energy loss has been performed and the improvement configuration of valve seat based on this visualization results is proposed. In the visualization results, flows in the piping system became instability under the influence of the shape of boss. This unstable flows induces sudden pressure drop in the piping system. So, we change the configuration of boss as a streamlined design to be stabilized the flows. A pressure measurement has been performed to know that the influence of the configuration change. In result, the rate of pressure loss reduction is about 22% at the position of No. 2 and 24.2% at the position of No. 6 in comparison with pre-improved shape.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.356-356
• /
• 2007

Plasma immersion ion beam deposition (PIIBD) technique is a cost-effective process for the deposition of diamond like carbon thin film, the possible solid lubricant on large surface and a complex shape. We used PIIB process for the preparation of DLC thin film on $Al_2O_3$ with deposition conditions of deposition temperature range $200^{\circ}C$, working gas pressure of 1.310-1Pa. DLC thin films were coated by $C_2H_2$ ion beam deposition on $Al_2O_3$ after the ion bombardment of SiH4 as the bonding layer. Energetic bombardment of $C_2H_2$ ions during the DLC deposition to ceramic materials generated mixed layers at the DLC-Si interface which enhanced the interface to be highly bonded. Wear test showed that the low coefficient of friction of around 0.05 with normal load 2.9N and proved the advantage of the low energy ion bombardment in PIIBD process which improved the tribological properties of DLC thin film coated alumina ceramic. Furthermore, PIIBD was recognized as a useful surface modification technique for the deposition of DLC thin film on the irregular shape components, such as molds, and for the improvement of wear and adhesion problems of the DLC thin film, high temperature solid lubricant.