• Structural Engineering and Mechanics
• /
• 제22권4호
• /
• pp.419-432
• /
• 2006

Experimental studies on the behaviors of box-shape steel reinforced concrete (SRC) composite beams were conducted. Seven 1:3 scale model composite beams were tested to failure. Each of the beams was simply supported at the ends and two concentrated loads were applied at the one-third span and two-thirds span respectively. Experimental results indicate that the flexural strength can be enhanced when the ratio of flexural reinforcements and flange thickness of the shape steel are increased; the shear strength is enhanced with increase of web thickness of the shape steel. Insignificant effects of concrete in the box-shape steel are found on improving the flexural strength and shear strength of the box-shape SRC composite beams, thus concrete inside the box-shape steel can be saved, and the weight of the SRC beams can be decreased. Shear studs can strengthen the connection and co-work effects between the shape steel and the concrete and enhance the shear strength, but stud design for the composite beams should be further improved. Formulas for flexural and shear strength of the composite beams are proposed, and the calculated results are in good agreement with the experimental results. In general, the box-shape SRC composite beam is a kind of ductile member, and suitable for extensive engineering application.

• 대한기계학회논문집A
• /
• 제39권12호
• /
• pp.1305-1311
• /
• 2015

버터플라이 밸브는 일반적으로 유량을 조절하기 위해 사되는 유량 제어 장치의 일종이다. 본 연구에서는 중심형 버터플라이 밸브의 개선 전후 제품에 대한 신뢰성 시험 데이터의 통계적 분석을 통하여 버터플라이 밸브에 대한 와이블 분포의 형상모수, 특성수명 및 $B_{10}$ 수명을 추정한다. 또한 통계적 가설검정을 이하여 개선 전후 제품의 형상모수와 척도모수에 대한 차이를 검토한다. 가설검정 결과로부터 개선 전후 제품의 형상모수는 유사하며, 척도모수는 증가함을 알 수 있었다. 이러한 분석결과는 향후 신뢰성 인증시험이나 제품에 대한 보증수명 설정에 유한 정보로 활용될 수 있다.

• Transactions on Electrical and Electronic Materials
• /
• 제7권4호
• /
• pp.196-203
• /
• 2006

An air-gap type FBAR was designed using Leach equivalent model for analyzing a vertical structure of the FBAR. For the top electrode, Pt, and the bottom electrode, Au, of $1.2{\mu}m$ thickness and the piezoelectric of 0.8,urn thickness, the resonance and anti-resonance occurred at 2.401 GHz and 2.460 GHz, respectively. $S_{11}$ was increased and $S_{21}$ was decreased as the resonance area of FBAR was widened. We observed the characteristics of insertion loss, bandwidth and out-of-band rejection of ladder-type FBAR BPF by changing resonance areas of series and shunt resonators and by adding stages. As the resonance area of series resonator was increased, insertion loss was improved but out-of-band rejection was degraded. And as the resonance area of shunt resonator was increased, insertion loss was degraded a little but out-of-band rejection was improved even without adding stages. We, also, changed the shape of the resonance area from square shape to rectangle shape to examine the effects of the resonator shape on the characteristics of the BPF. The best performances were observed when the sizes of series and shunt resonator are $150{\mu}m{\times}l50{\mu}m\;and\;5{\mu}m{\times}50{\mu}m$, respectively. Out-of-band rejection was improved about 10dB and bandwidth was broadened from 30MHz to 100MHz utilizing inductor tuning on $2{\times}2\;and\; 4{\times}2$ ladder-type BPFs.

• 한국전산구조공학회논문집
• /
• 제24권1호
• /
• pp.87-95
• /
• 2011

본 논문에서는 비선형해석이라는 복잡한 과정을 거치지 않고도 사장교 시스템의 초기형상을 효율적이고 합리적으로 결정하는 방법을 제시하고자 한다. 사장교 시스템의 초기형상해석이라 함은 주형의 수직 처짐과 휨모멘트, 주탑의 수평변위와 휨모멘트를 최소화하면서, 고정하중과 평형을 이룰 수 있는 케이블의 장력과 무응력길이를 결정하는 방법으로 이때, 케이블이 정착되는 주형의 수평위치, 주탑의 수직위치가 변하지 않아야 한다. 본 연구에서는 주형과 주탑의 케이블 정착부에서 힘의 평형조건을 이용하여 주형의 수직 처짐과 주탑의 수평변위를 효과적으로 제어할 수 있는 장력 산정법을 사장교의 형태별로 정리하여 제시하였으며, 2차원 사장교 예제들에 대하여 기존 연구의 방법들과 장력, 주형의 모멘트와 처짐 등을 비교하였다. 또한 3차원 실교량에 대해 Improved TCUD법으로 초기형상해석을 수행하여 그 결과와 비교함으로서 본 방법의 정확성을 입증하고자 하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.809-814
• /
• 2009

Deep mixing method has been used for ground improvement and foundation system for embankment, port and harbor foundations, retaining wall, and liquefaction mitigations. It has attractive benefits because it is not only improved strength of soft ground but superior for prevention of settlement. However, the quality controls of improved mass affect to the efficiency of the deep mixing method is not properly established. These effects vary depending upon the construction environments and conditions of agitation in consideration of an agitator. The strength and shape of the improved column are not unique and these are affected by mechanical properties of agitators. In this study, in order to investigate the efficiency of deep mixing method for ground improvement on a soft clay ground, experimental studies are performed considering mechanical properties of agitator; the location of exit-hole of admixtures, an angle of mixing wing and a speed of revolution. The experiments are conducted with the simulated apparatus for deep mixing plant that reduced the scale in 1:8 of the real plant. According to the results, the diameter and shape of improved column mass vary depending on the mechanical properties and operating conditions of agitator. Its quality is better when the exit-hole of admixtures is located in the mixing wing, when an angle of mixing wing is large, and when the speed of revolution is rapid.

• 소성∙가공
• /
• 제13권6호
• /
• pp.497-502
• /
• 2004

The shape of cold rolled steel sheets is defined as the degree of flatness, and the flatter, the better. Because undesirable strip shapes of cold rolled steel sheets can affect not only visible problem but also automatic working process in customer's lines, the requirement of the customers is more and more stringent. So we usually used the tension leveler to make high quality of strip flatness. For the improvement of the quality of strip flatness, this report developed three- dimensional FEM (Finite Element Method) simulation model, and analysis about the strain and stress distribution of strip in the tension leveling process. The numerical study can be summarized as follows. (1) If we pass the edge wave material (steepness: $1.0\%$) that the stress-difference between the strip center and the edge is 5.2kgf through tension leveler. the stress-difference is decreased 0.45kgf and the steepness is improved to $0.29\%$. (2) If the Intermesh is increased from 6mm to 7mm, the steepness is improved from $0.294\%$ to $0.268\%$. (3) If the initial steepness is decreased form $1.0\%$ to $0.75\%$, the final steepness is improved from $0.294\%$ to $0.263\%$. We know that more increased intermesh and lower initial steepness make the final steepness improved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.367-370
• /
• 2002

CRTs can be improved by means of magnetic quadrupoles. Areas of improvement are convergence, spot shape, image-flatness and space charge compensation.

• 한국멀티미디어학회논문지
• /
• 제15권1호
• /
• pp.63-70
• /
• 2012

본 논문에서는 ASM(active shape model)의 성능을 향상시키기 위하여 형태(shape) 정렬 방법과 이차원 특징벡터 추출 방법을 제안한다. 기존 알고리즘은 입력 이미지의 중간 검출 랜드마크와 기준 모델 간의 정렬을 위하여 스케일, 회전, 이동 정보 만을 이용한다. 하지만 위의 평면적인 정보 만으로는 얼굴과 같이 입체적인 물체의 포즈 변화나 삼차원적인 움직임 등을 제대로 반영할 수 없다. 이를 개선하기 위하여 자유도를 증가시킴으로써 형태의 복잡한 변화에 보다 강인한 형태정렬 방식을 제안한다. 또한, 멀티스케일로 이차원 프로파일을 구하고 이들의 공분산 행렬을 trimming하여 검출속도를 향상시키는 방법을 제안한다. 비교적 다양한 포즈로 촬영한 얼굴 이미지 데이터베이스를 이용하여 제안 알고리즘의 형태 검출 성능을 확인한다.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1496-1506
• /
• 2003

The SIMP (solid isotropic material with penalization) approach is perhaps the most popular density variable relaxation method in topology optimization. This method has been very successful in many applications, but the optimization solution convergence can be improved when new variables, not the direct density variables, are used as the design variables. In this work, we newly propose S-shape functions mapping the original density variables nonlinearly to new design variables. The main role of S-shape function is to push intermediate densities to either lower or upper bounds. In particular, this method works well with nonlinear mathematical programming methods. A method of feasible directions is chosen as a nonlinear mathematical programming method in order to show the effects of the S-shape scaling function on the solution convergence.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.166-171
• /
• 2004

In this study, shape optimization of micro-static mixer with a cantilever beam was accomplished for mixing the mixing efficiency by using successive response surface approximations. Variables were chosen as the length of cantilever beam and the angle between horizontal and the cantilever beam. Sequential approximate optimization method was used to deal with both highly nonlinear and non-smooth characteristics of flow field in a micro-static mixer. Shape optimization problem of a micro-static mixer can be divided into a series of simple subproblems. Approximation to solve the subproblems was performed by response surface approximation, which does not require the sensitivity analysis. To verify the reliability of approximated objective function and the accuracy of it, ANOVA analysis and variables selection method were implemented, respectively. It was verified that successive response surface approximation worked very well and the mixing efficiency was improved very much comparing with the initial shape of a micro-static mixer.