• 대한치과보철학회지
• /
• 제57권4호
• /
• pp.350-355
• /
• 2019

성공적인 총의치를 위해서는 유지, 안정, 지지 세가지 요소가 필수적으로 요구된다. 또한 심한 치조제의 흡수나 수술에 의한 반흔으로 인해 하악 설측변연 형성이 어려운 총의치 제작시에는 무교두 치아배열, 연마면 인상, 무게 보강 내부금속 삽입, 의치 접착 크림의 사용 등의 다양한 고려사항이 필요하다. 본 환자의 경우 심한 치주염으로 심하게 골흡수가 된 무치악 치조제를 가졌고, 또한 설암으로 인한 설절제술로 인해 연조직의 문제를 가진 환자이다. 부가적인 유지와 안정을 얻기 위해 연마면 인상과 내부 보강 금속구조물의 삽입 그리고 최소 가압 인상 등의 방법을 적용하여 보다 나은 임상적 결과를 나타내었다. 또한 원하는 3차원적 형태를 정확하게 부여하고 제작시 복잡한 기공과정을 줄인 금속 구조물을 제작하기 위해 최소 가압 인상 채득과 Direct metal laser sintering이 사용되었다.

• 한국CDE학회논문집
• /
• 제18권4호
• /
• pp.283-289
• /
• 2013

Presented in this paper is an adaptive measuring procedure of dental impression using the Structured Light System. While measuring a complex object, such as dental impression, in the reverse engineering, it is not possible to acquire all parts of the scanned surface. Missing scanned data is resulted in holes in a created triangular mesh. The focus of this paper is to introduce an algorithm for automatic identification of additional scanning orientations to fill holes that are created by a default scan. The proposed algorithm was developed by the three major technological requirements: camera visibility, projector visibility, data reliability. In order to satisfy the requirements, the proposed algorithm determines additional scanning orientation from the orientation of a projection plane derived from the average normal vector of boundary triangles.

• The Journal of Advanced Prosthodontics
• /
• 제14권4호
• /
• pp.236-249
• /
• 2022

PURPOSE. The present study compared the accuracy between digital and conventional implant impressions. MATERIALS AND METHODS. The experimental models were divided into six groups depending on the implant location and the scanning span. Digital impressions were captured using the intraoral optical scanner TRIOS (3Shape, Copenhagen, Denmark). Conventional impressions were taken with the monophase impression material based on addition-cured silicones, Honigum-Mono (DMG, Hamburg, Germany). A high-precision laboratory scanner D900 (3Shape, Copenhagen, Denmark) was used to obtain digital data of resin models and stone casts. Surface tessellation language (STL) datasets from scanner were imported into the analysis software Geomagic Qualify 14 (3D Systems, Rock Hill, SC, USA), and scan body deviations were determined through two-dimensional and three-dimensional analyses. Each scan body was measured five times. The Sidak t test was used to analyze the experimental data. RESULTS. Implant position and scanning distance affected the impression accuracy. For a unilateral arch implant and the mandible models with two implants, no significant difference was observed in the accuracy between the digital and conventional implant impressions on scan bodies; however, the corresponding differences for trans-arch implants and mandible with six implants were extremely significant (P<.001). CONCLUSION. For short-span scanning, the accuracy of digital and conventional implant impressions did not differ significantly. For long-span scanning, the precision of digital impressions was significantly inferior to that of the traditional impressions.

• 대한치과보철학회지
• /
• 제32권4호
• /
• pp.515-525
• /
• 1994

Impression taking is a very important procedure in complete denture fabrication for reproduction of the tissue surface from which obtain retention and support of denture base. Therefore, we can not construct retentive denture without precise impression taking. Retention in complete denture can be obtained by the closest contact between denture base and underlying tissue, maximum coverage and proper displacement of the border tissue for peripheral sealing. Therefore, it is very important to take impression of the border tissue displaced properly. Nowadays, impression of the border tissue is mainly taken by the border molding techniques by means of manual muscle trimming, but due to various muscle trimming methods as clinicians, it is difficult to select proper method. This technique is also bodersome to do and time-consuming procedure. Retention is also likely reduced, because of the recording excessive muscle movement than actural physiological border tissue movement. Therefore, the impression technique that records actual physiologic functional muscle movement is helpful to increase denture retention and easy to do. We named this technique a functional border molding technique. This technique is originally introduced by D. J. Neill and R. I. Nairn in 1968. We tried to fabricate complete denture by the impression by means of functional border molding technique for better retention and the convenience, and obtained good results.

• 대한치과보철학회지
• /
• 제57권4호
• /
• pp.432-438
• /
• 2019

임플란트 보철 치료의 성공에 정확한 인상 채득은 매우 중요한 과정이다. 이러한 임플란트 보철의 인상을 채득하는 방법에는 임프레션 코핑과 인상재를 이용한 전통적인 방법과 구강 스캐너와 디지털 인상 코핑(scanbody)을 이용한 디지털 인상채득법이 있다. 하지만 인상용 코핑과 scanbody는 모두 구강 내 치유 지대주(healing abutment)를 제거하고 장착해야 한다. 때문에 술자는 치유 지대주와 임프레션 코핑 또는 scanbody를 여러 번 체결하고 제거하는 과정을 반복해야 한다. 뿐만 아니라 임프레션 코핑 또는 scanbody는 교합면보다 높게 솟아 있어 환자는 지속적으로 개구 상태를 유지해야 하는 불편을 주기도 한다. 이러한 기존의 방법을 극복하고자 최근에는 치유 지대주에 scanbody의 스캔 가능 부분(scannable part)을 부여하여 치유 지대주를 제거할 필요 없이 구강 내에서 직접 구강 스캐너로 스캔이 가능한 치유지대주(scannable healing abutment)가 소개되었다. 스캔이 가능한 치유지대주를 이용하여 구치부 단일 임플란트를 수복한 증례를 소개하고자 한다.

• 대한치과보철학회지
• /
• 제39권5호
• /
• pp.492-501
• /
• 2001

The use of alginate impression materials today is prevalent because of its efficiency and simplicity in clinical settings. Unfortunately, the simplicity of the procedure tends to lull the dentist into a sense of well-being, and lead him into using careless or sloppy technique. Alginate impression materials are used to fabricate diagnostic and preliminary casts, and the final cast. Incorrect use of this material is known to affect the accuracy of the final prosthesis. The purpose of this study was to compare the effect of different mixing methods of alginate impression material and tray adhesive on the accuracy of the stone cast produced by each method. A total of 30 stone casts were produced by using 3 different types of mixing methods (10 stone cast for each mixing method, respectively). The first method utilized an automatic-mixing machine to mix alginate while the second method was carried out manually, strictly following manufacturer's instructions. The third method also involved manual mixing, but did not follow the manufacturer's instructions and was done in a random fashion. Also, 20 additional stone casts were produced by using alginate with or without tray adhesives were included in the study to evaluate effects of tray adhesives on the accuracy of alginate impression. 10 stone casts were produced by adding tray adhesives to the interior surface of the impression tray prior to taking the impression. The other 10 excluded this step. A total of 50 stone casts were analyzed by the three-dimensional measuring machine to measure and compare the dimensional changes of the impression material of each group. The results are as follows. 1. No significant difference was found between the automatic mixing group and the manually-mixing group(p>0.05). 2. For the group that followed manufacturer's instructions, less dimensional changes were record ed than the group that didn't in measuring distanced 4(p<0.05). 3. The group that used tray adhesives showed less dimensional changes(p<0.05). The findings revealed that mechanical methods of mixing alginate impression materials had little influence on dimensional changes. However, it is proven that following manufacturers instructions in alginate impression taking is an important step in acquiring accurate impressions and tray adhesives may play an important role in enhancing the results.

• 복식
• /
• 제51권2호
• /
• pp.43-52
• /
• 2001

The purpose of this research is to study the aesthetic character of a mosaic which is expressed in the Modern Costume. The methods of the research were by literature and it was mainly done with reference to master's theses, doctor's theses, separate volumes, periodicals, domestic and overseas fashion magazines and internet on the subject. The result of the research appears as rhythm, exoticism, abstraction, mystery, recreation by disintegration. First, rhythm appears in a sense of free rhythm with the method of arranging motives and the kinds of materials varying. Second, exoticism gives impression with such motives as Oriental designs, African designs and the geometric designs of nature occupying the surface. Third, abstraction displays motives such as unrealistic fashion. Fourth, mystery gives a cyber-related impression with the help of such scientific materials as fluorescent plastics, metal and glass. Fifth, recreation pelves an aesthetic impression by reorganizing the costume with the disintegration and transformation of Industrial materials such as plastics, metal and glass, etc. based on their unique colors and quality.

• 한국산학기술학회논문지
• /
• 제4권1호
• /
• pp.36-41
• /
• 2003

열간단조 밀폐금형의 수명연장을 위한 빌릿의 소성변형 유동해석을 유한 요소법에 의하여 실시한 결과 임프레션 형상에 대한 수정설계를 수행하였고, 임프레션 표면 마멸부위의 보수방법을 육성용접에 의한 방법으로 금형을 재생하여 사용한 결과 개발 전의 3,0(H개 생산에서 개발 후 5,000개 양산되었을 때 임프레션 표면을 관찰하였더니 3,000개 정도에서 나타났던 마멸보다 얕은 마멸이 나타났다.

• The Journal of Advanced Prosthodontics
• /
• 제16권1호
• /
• pp.57-65
• /
• 2024

PURPOSE. The aim of this stuldy was to compare the clinical marginal fit of CAD-CAM inlays obtained from intraoral digital impression or addition silicone impression techniques. MATERIALS AND METHODS. The study included 31 inlays for prosthodontics purposes of 31 patients: 15 based on intraoral digital impressions (DI group); and 16 based on a conventional impression technique (CI group). Inlays included occlusal and a non-occlusal surface. Inlays were milled in ceramic. The inlay-teeth interface was replicated by placing each inlay in its corresponding uncemented clinical preparation and taking interface impressions with silicone material from occlusal and free surfaces. Interface analysis was made using white light confocal microscopy (WLCM) (scanning area: 694 × 510 ㎛²) from the impression samples. The gap size and the inlay overextension were measured from the microscopy topographies. For analytical purposes (i.e., 95-%-confidence intervals calculations and P-value calculations), the procedure REGRESS in SUDAAN was used to account for clustering (i.e., multiple measurements). For p-value calculation, the log transformation of the dependent variables was used to normalize the distributions. RESULTS. Marginal fit values for occlusal and free surfaces were affected by the type of impression. There were no differences between surfaces (occlusal vs. free). Gap obtained for DI group was 164 ± 84 ㎛ and that for CI group was 209 ± 104 ㎛, and there were statistical differences between them (p = .041). Mean overextension values were 60 ± 59 ㎛ for DI group and 67 ± 73 ㎛ for CI group, and there were no differences between then (p = .553). CONCLUSION. Digital impression achieved inlays with higher clinical marginal fit and performed better than the conventional silicone materials.

• 치위생과학회지
• /
• 제10권3호
• /
• pp.177-183
• /
• 2010

탄성 고무인상재의 종류인 폴리설파이드(polysulfide), 폴리이써(polyether), 부가중합형 실리콘(addition silicone)에서 점주도(consistency)가 Type III인 인상재를 각각 1종류 선택하여 증류수 $3.3{\mu}l$를 떠뜨려 접촉각을 측정하고, 세 종류의 인상체에 치과용 경석고를 부어 작업모형을 만들고 표면을 관찰하였다. 접촉각 측정은 전자동접촉 각 측정시스템(DM-700, KYOWA, Japan)을 이용하였고 작업모형의 표면관찰은 전계 방사형 주사 전자현미경(JSM-6700F, JEOL Ltd., JAPAN)을 이용하여 다음과 같은 결론을 얻었다. 1) 초기 접촉각의 평균과 표준편차는 부가중합형실리콘, 폴리이써, 폴리설파이드 제품이 각각 $91.3^{\circ}{\pm}20.5$, $90.0^{\circ}{\pm}2.2$, $101.5^{\circ}{\pm}2.3$로 평균값은 유사하게 나타났으나 부가중합형실리콘의 표준편차값에서 큰 차이를 보여줬다. 이는 술자의 술식에 따라 항상 일정한 특성을 보여주지 않는 다는 것이다. 2) 시간이 흐를수록 부가중합형실리콘 제품은 다른 두 종류에 비해 접촉각이 급속히 감소함을 관찰 할 수 있었고, 초기접촉각이 $91.3^{\circ}$이며 25초 후 $29.4^{\circ}$로 급격히 감소했다. 3) 폴리이써 제품은 초기접촉각이 $101.5^{\circ}$에서 25초 후의 접촉각 $90.7^{\circ}$이였고, 폴리설파이드 제품은 초기접촉각이 90.0에서 25초 후의 접촉각 84.2로 변화가 거의 일어나지 않았고 그 각도도 부가중합형실리콘에 비해 컸다. 4) 세 종류의 탄성고무인상재에서 시간이 흐름으로써 관찰된 접촉각은 유의성이 있었다(p<0.001). 5) 작업모형의 표면관찰에서 부가중합형실리콘이 가장 치밀했고, 그 다음 폴리설파이드, 폴리이써 순서였다. 따라서 탄성고무 인상재에 있어서 접착각이 작은 부가중합형 실리콘은 폴리이써나 폴리설파이드 제품에 비해 더 치밀한 작업모형을 얻을 수 있었고 세 종류의 인상재접착각에서 큰 유의성을 보였다. 그러나 부가중형 실리콘은 접촉각의 편차가 커 술자의 주의가 필요한 것으로 나타났고 폴리설파이드 제품과 폴리이써 제품은 20~25초 후 접촉각이 최초 접촉각과 큰 차이를 보이지 않아 소수성 제품으로 인상채득 시 주의가 요망되는 것으로 보여진다. 향후 Vitro 상태에서 인상재에 영향을 미치는 여러가지 요인들에 대한 계속적인 연구의 필요성을 느낀다.