• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.145-155
• /
• 2000

Orientation data of discontinuities are of paramount importance for rock slope stability studies because they control the possibility of unstable conditions or excessive deformation. Most orientation data are collected by using linear sampling techniques, such as borehole fracture mapping and the detailed scanline method (outcrop mapping). However, these data, acquired by the above linear sampling techniques, are subjected to bias, owing to the orientation of the sampling line. Even though a weighting factor is applied to orientation data in order to reduce this bias, the bias will not be significantly reduced when certain sampling orientations are involved. That is, if the linear sampling orientation nearly parallels the discontinuity orientation, most discontinuities orientation data which are parallel to sampling line will be excluded from the survey result. This phenomenon can cause serious misinterpretation of discontinuity orientation data because critical information is omitted. In the case study, orientation data collected by using the borehole fracture mapping method (vertical scanline) were compared to those based on orientation data from the detailed scanline method (horizontal scanline). Differences in results for the two procedures revealed a concern that a representative orientation of discontinuities was not accomplished. Equal-area, polar stereo nets were used to determine the distribution of dip angles and to compare the data distribution fur the borehole method versus those for the scanline method.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.3
• /
• pp.177-185
• /
• 2000

The adjoint method is a method of data assimilation to improve the model results by seeking for model parameters that minimize the cost function and satisfy the governing equations of a model simultaneously. An adjoint package was set up for the two-dimensional linear tidal model and was applied to an idealized domain for an optimal estimation of the open boundary conditions. The assimilating data were selected from the results of forward modeling. Attention is paid on the response of the adjoint package to weighting parameters, the importance of initial estimates of model parameters and the applicability of the adjoint package to the case with varying depth. A procedure to determine optimal weight is presented based on the relationships between weights and other factors.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.2
• /
• pp.137-144
• /
• 2013

A sequential pattern mining is finding out frequent patterns from the data set in time order. In this field, a dynamic weighted sequential pattern mining is applied to a computing environment that changes depending on the time and it can be utilized in a variety of environments applying changes of dynamic weight. In this paper, we propose a new sequence data mining method to explore the stream data by applying the dynamic weight. This method reduces the candidate patterns that must be navigated by using the dynamic weight according to the relative time sequence, and it can find out frequent sequence patterns quickly as the data input and output using a hash structure. Using this method reduces the memory usage and processing time more than applying the existing methods. We show the importance of dynamic weighted mining through the comparison of different weighting sequential pattern mining techniques.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.107-120
• /
• 2020

In a performance-based evaluation of structures in use, the current performance is assessed by summing up the weighting of the evaluation indices for each performance. In this study, to suggest a performance-based evaluation technique for NATM tunnels in use, the performance evaluation indices were derived by examining the characteristics and similarities of each index developed from previous study. The weighting of the evaluation indices was derived by calculating the relative importance of each evaluation indices from the AHP analysis. In order to develop a quantitative evaluation model, grading criteria for each performance index was derived through literature review, and performance evaluation tables for road and railway tunnels were presented. In order to verify the significance of the proposed performance evaluation model, the correlation analysis was performed between each evaluation index and the final evaluation result. In the correlation analysis, the survey data measured through precision safety diagnosis in the tunnel in use was applied. It may be said that the proposed evaluation indices, weighting, criteria and evaluation models for tunnels in use can be applied to the performance-based maintenance system of tunnels.

• Journal of KIISE:Databases
• /
• v.35 no.2
• /
• pp.192-198
• /
• 2008

It is difficult to get relevant information on vast Web data. Search engines summarize and store Web information and show the ranked lists based on user queries affected by relative importance and user-adaptation. But these have limitation with showing user-intended information at the top priority. User intention is presented in general within query itself. In this paper, we propose the selective rankup methodology of user-intended search results based on weighting internal contiguity in query terms. With experimental results, we can find user-intended results with 75.8% probability using this simple method only, and efficiency of rerank proposed outperforms ordinary case by $13{\sim}20%$.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.2
• /
• pp.115-126
• /
• 2015

Although the frequency of use for community facilities in rural villages is growing as well as the importance of the facilities for urban-rural exchange is being highlighted, study on spatial location-analysis of the facilities for such multi-purpose is not so much. This study aims to find the spatial distribution forms of community facilities in rural villages such as community center and rural-pocket park through location-analysis, in order to provide available data for selecting location in the future. As the study area, Sojeong-myeon, Sejong Special City was selected. This study conducted GIS analysis for criteria of the location-evaluation model developed in this study. This study introduced the concept of time-distance for accessibility analysis. This paper also used linear-consecutive scoring method(LCSM) as a scoring method of criteria and Analytic Hierarchy Process(AHP) method for weighting values of criteria. The application results showed that the new model can generate the intensity of community facilities according to spatial distribution and accessibility from cities to the facilities.

• Steel and Composite Structures
• /
• v.35 no.2
• /
• pp.249-260
• /
• 2020

The main purpose of this research work is to investigate the free vibration of conical shell structures reinforced by graphene platelets (GPLs) and the elastic properties of the nanocomposite are obtained by employing Halpin-Tsai micromechanics model. To this end, a shell model is developed based on Donnell's theory. To solve the problem, the analytical Galerkin method is employed together with beam mode shapes as weighting functions. Due to importance of boundary conditions upon mechanical behavior of nanostructures, the analysis is carried out for different boundary conditions. The effects of boundary conditions, semi vertex angle, porosity distribution and graphene platelets on the response of conical shell structures are explored. The correctness of the obtained results is checked via comparing with existing data in the literature and good agreement is eventuated. The effectiveness and the accuracy of the present approach have been demonstrated and it is shown that the Donnell's shell theory is efficient, robust and accurate in terms of nanocomposite problems.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.11-17
• /
• 2019

Plantar pressure data can be used not only for walking patterns in daily life, but also for eating, health care, and disease prevention. For this reason, the importance of plantar pressure measurement has recently increased. However, most systems that can measure both static and dynamic plantar pressure at the same time are expensive, not portable, and not universal. In this study, we propose a system that effectively reduces the number of sensors in plantar pressure system. Through this, we want to increase the economics and practicality by reducing the size and weight of the system, as well as the power consumption. First, for static plantar pressure and dynamic plantar pressure, the values measured by existing precision instruments are analyzed to determine how many measurement parts the insole is divided into. Next, for the divided measuring parts, the position of the sensor is determined by calculating the Center of Pressure (COP) for each part with the values of all dynamic and static plantar pressure sensors. Finally, in order to construct a personalized plantar pressure measurement system, we propose a weighting method for the static plantar pressure COP and the dynamic plantar pressure COP for each part.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.185-191
• /
• 2004

The mean and Clustering are important methods of data mining, which is now widely applied to various multi-attributes problem However, feature weighting and feature selection are important in those methods bemuse features may differ in importance and such differences need to be considered in data mining with various multiful-attributes problem. In addition, in the event of arithmetic mean, which is inadequate to figure out the most fitted result for structure of evaluation with attributes that there are weighted and ranked. Moreover, it is hard to catch hold of a specific character for assume the form of user's group. In this paper. we propose a dispersion mean algorithm for evaluation of similarity measure based on the geometrical figure. In addition, it is applied to mean classified by user's group. One of the key issues to be considered in evaluation of the similarity measure is how to achieve objectiveness that it is not change over an item ranking in evaluation process.

• Journal of Environmental Impact Assessment
• /
• v.2 no.1
• /
• pp.39-55
• /
• 1993

The importance of urban and regional natural park increases because of the needs for preserving the natural resources and providing with natural recreation space in nature. This planning of natural park management should be established based on the research of the various natural resources in the park. But for the lack of effective data synthesizing methods and concepts, only some restricted factors for zoning plan are considered even though GIS computer system for large complex simulation is used. Therefore, in this study three ecological zoning models such as Basic Factor Model (BFM), Visual Landscape Model (VLM) and Comprehensive Ecological Model (CEM) are proposed and applied to Byounsan Peninsula Nature Park(BPNP) for comparison with the current natural park zoning. The BFM has three components -elevation, slope and vegetation. The VLM has applied with six components -elevation, slope, vegetation, road type, and the visual distance. Finally the CEM's modelling factors have included all of BFM, VLM components are added with the land use type, nature and historic resource factors. The zoning concept of BPNP was based on "Minimization" focused on the specific factors. But introduced modelling concept is "Optimization" based on the total ecological environment. So the result of the modelling has larger area for preservation and development zoning compared with the current zoning whose characteristics are ambiguous which allows the environmental destruction. The future study issues will be the determination of the weighting factor, component reconsideration based on the ground truth data and the agriculture residential area zoning.