• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.135-150
• /
• 2002

The basic assumption of analytical Dynamic Traffic Assignment models is that traffic demand and network conditions are known as a priori and unchanging during the whole planning horizon. This assumption may not be realistic in the practical traffic situation because traffic demand and network conditions nay vary from time to time. The rolling horizon implementation recognizes a fact : The Prediction of origin-destination(OD) matrices and network conditions is usually more accurate in a short period of time, while further into the whole horizon there exists a substantial uncertainty. In the rolling horizon implementation, therefore, rather than assuming time-dependent OD matrices and network conditions are known at the beginning of the horizon, it is assumed that the deterministic information of OD and traffic conditions for a short period are possessed, whereas information beyond this short period will not be available until the time rolls forward. This paper introduces rolling horizon implementation to enable a multi-class analytical DTA model to respond operationally to dynamic variations of both traffic demand and network conditions. In the paper, implementation procedure is discussed in detail, and practical solutions for some raised issues of 1) unfinished trips and 2) rerouting strategy of these trips, are proposed. Computational examples and results are presented and analyzed.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.8
• /
• pp.1-10
• /
• 2014

This paper proposes a parallel implementation of the video based 4-stage fire detection algorithm using a general-purpose graphics processing unit (GPGPU) to support real-time processing of the high computational algorithm. In addition, this paper compares the performance of the GPGPU based fire detection implementation with that of the CPU implementation to show the effectiveness of the proposed method. Experimental results using five fire included videos with an SXGA ($1400{\times}1050$) resolution, the proposed GPGPU implementation achieves 6.6x better performance that the CPU implementation, showing 30.53ms per frame which satisfies real-time processing (30 frames per second, 30fps) of the fire detection algorithm.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.553-563
• /
• 2016

This paper presents a digital hardware implementation of a real-time simulator for a multiphase drive using a field-programmable gate array (FPGA) device. The simulator was developed with a modular and hierarchical design using very high-speed integrated circuit hardware description language (VHDL). Hence, this simulator is flexible and portable. A state-space representation model suitable for FPGA implementations was proposed for a dual three-phase induction machine (DTPIM). The simulator also models a two-level 12-pulse insulated-gate bipolar transistor (IGBT)-based voltage-source converter (VSC), a pulse-width modulation scheme, and a measurement system. Real-time simulation outputs (stator currents and rotor speed) were validated under steady-state and transient conditions using as reference an experimental test bench based on a DTPIM with 15 kW-rated power. The accuracy of the proposed digital hardware implementation was evaluated according to the simulation and experimental results. Finally, statistical performance parameters were provided to analyze the efficiency of the proposed DTPIM hardware implementation method.

• Journal of the Korean Society of Industry Convergence
• /
• v.18 no.3
• /
• pp.139-149
• /
• 2015

In this paper, we describe a new approach to perform real-time implementation of an robust controller for robotic manipulator based on digital signal processors in this paper. The Texas Instruments DSPs chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved direct Lyapunov method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for robot manipulator consisting of dual arm with eight degrees of freedom at the joint space and cartesian space.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.4
• /
• pp.59-71
• /
• 2001

The Current CORBA shows some limitations for its successful deployment in real time system applications. Recently, OMG adopted Real-Time CORBA specification, which is defined as an extension to CORBA. The goal of the Real-Time CORBA is to provide a standard for CORBA ORB implementations that support 'end to end predictability'. In order to support 'end-to-end predictability', Real Time CORBA specifies many components such as priority model, communication protocol configuration, thread management, and etc. Among them, 'priority model' is the most important mechanism for avoiding or bounding priority inversion in CORBA invocations. In this paper, we present our efforts on a design ,and implementation of the Priority Model in Real-Time CORBA specification. The implementation is done as an extension of omniORB2(v.3.0.0), a popular open source non real time ORB. Experiment results demonstrate that our priority model implementation shows better performance and predictability than the non real-time ORB.

• Journal of information and communication convergence engineering
• /
• v.20 no.3
• /
• pp.174-180
• /
• 2022

Emotion recognition is an essential component of complete interaction between human and machine. The issues related to emotion recognition are a result of the different types of emotions expressed in several forms such as visual, sound, and physiological signal. Recent advancements in the field show that combined modalities, such as visual, voice and electroencephalography signals, lead to better result compared to the use of single modalities separately. Previous studies have explored the use of multiple modalities for accurate predictions of emotion; however the number of studies regarding real-time implementation is limited because of the difficulty in simultaneously implementing multiple modalities of emotion recognition. In this study, we proposed an emotion recognition system for real-time emotion recognition implementation. Our model was built with a multithreading block that enables the implementation of each modality using separate threads for continuous synchronization. First, we separately achieved emotion recognition for each modality before enabling the use of the multithreaded system. To verify the correctness of the results, we compared the performance accuracy of unimodal and multimodal emotion recognitions in real-time. The experimental results showed real-time user emotion recognition of the proposed model. In addition, the effectiveness of the multimodalities for emotion recognition was observed. Our multimodal model was able to obtain an accuracy of 80.1% as compared to the unimodality, which obtained accuracies of 70.9, 54.3, and 63.1%.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1840-1845
• /
• 2005

The SoC and digital technology development recently enabled the emergence of information devices and control devices because the SoC present many advantages such as lower power consumption, greater reliability, and lower cost. It is required to use an embedded operating system for building control systems. So far, the Real-Time operating system is widely used to implement a Real-Time system since it meets developer's requirements. However, Real-Time operating systems reveal a lack of standards, expensive development, and license costs. Embedded Linux is able to overcome these disadvantages. In this paper, the implementation of control system platform using Real-Time Embedded Linux is described. As a control system platform, we use XScale of a Soc and build Real-Time control platform using RTAI and Real-Time device driver. Finally, we address the feasibility study of the Real-Time Embedded Linux as a Real-Time operating system for mobile robots.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.409-409
• /
• 2000

In this paper, the implementation of a tightly coupled real-time GPS/INS integrated system is discussed. The hardware is developed for any GPS receiver and any IMU. The navigation software is modularized by tasks, so that can be easily modified when the integrated system is restructured. A van test was performed to show the feasibility of the proposed system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.51-54
• /
• 2002

This paper deals with an implementation of NUBS interpolator and presents the process of its integration into PC-NC. For more accurate feed, NURBS algorithm is improved. Also, Evaluation of real time NURBS interpolator is provided to verify fred accuracy and geometrical accuracy of NURBS curve. NURBS machining of fee surface is simulated on the real time NC simulator so that machining time is compared to that of linear path machining.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1991.06a
• /
• pp.129-132
• /
• 1991

In this paper, the active noise controll system in duct is analyzed with real time implementation. The primary noise signal detected by microphone is modeled using adaptive algorithm and the secondary signal which has the same amplitude and 180$^{\circ}$phase shift with the primary noise signal is generated in the controller. We used the DSP56001 as a real-time processor and LMS algorithm as a adaptive technique, the experimental results shows that our system can reduce the noise level in duce to 15~40[db].