• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.3
• /
• pp.35-42
• /
• 2017

This paper presents hardware implementation of background timing-skew calibration technique for time-interleaved analog-to-digital converters (TI ADCs). The timing skew between any two adjacent analog-digital (A/D) channels is detected by using pure digital Finite Impulse Response (FIR) delay filter. This paper includes hardware architecture of the system, main units and small sub-blocks along with control logic circuits. Moreover, timing diagrams of logic simulations using ModelSim are provided and discussed for further understanding about simulations. Simulation process in MATLAB and Verilog is also included and provided with basic settings need to be done. For hardware implementation it not practical to work with all samples. Hence, the simulation is conducted on 512 TI ADC output samples which are stored in the buffer simultaneously and the correction arithmetic is done on those samples according to the time skew algorithm. Through the simulated results, we verified the implemented hardware is working well.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.58-58
• /
• 2000

As many sensors and actuators are used in various automated systems, the application of network system to real-time distributed control is gaining acceptance in many industries. In order to take advantages of the network technique. however, network implementation should be carefully designed to satisfy real-time constraints and to consider network delays. This paper presents the implementation of feedback control system in Profibus-DP. Profibus-DP is a type of fieldbus protocols that are specifically designed to interconnect simple devices with fast I/O data exchange. As feedback control in profibus-DP is implemented, Network delays is found with influence of system performance. We analyze network delays in Profibus-DP into 3 reasons - dead time in Profibus interface, protocol delay, delay by asynchronization. In order to compensate the network delays, we introduce control algorithms with time delay concept. The results show that network delay can be compensated.

• Quality Improvement in Health Care
• /
• v.21 no.2
• /
• pp.12-24
• /
• 2015

Purpose: The need for the rapid evaluation and treatment of emergency department patients with major trauma is essential. A computerized physician order entry (CPOE) system can improve communication and provide immediate access to information with the goal of reducing ED time delays. The aim of this study was to report on the operation of a trauma CPOE program and demonstrate its usefulness by comparing time intervals from ED arrival to various evaluation steps before and after implementation of the program. Methods: This was a before-and-after observational study from a single emergency department at an academic center. The CPOE program was implemented for 6 months and compared with the data collected from the pre-CPOE implementation period. The efficacy of the program was assessed by comparing the time difference before and after CPOE implementation based on the following factors: total boarding time in ED, door-to-disposition decision time, door-to-blood-test report time, door-to-X-ray time, door-to-CT time, and door-to-transfusion time. Results: Over a period of 6 months, the CPOE was activated for a total of 17 patients. Total boarding time was reduced significantly after implementation [median, 641.5 minutes (IQR, 367.3-859.3) versus289.0 minutes (IQR, 140.0-508.0) for pre-CPOE vs. post-CPOE, respectively, p< 0.05). Time intervals for all evaluation steps were reduced after implementation of the program. The improvements in the door-to-blood-test and door-to-CT times were both statistically significant. Conclusion: This study demonstrated that a standard CPOE system can be successfully implemented and can reduce ED time delays in managing trauma patients.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1249-1252
• /
• 1996

With the expansion of research and development for the CIM and the IMS, the importance of introducing the communication network is being increased. This paper presents an implementation of robot workcell by using Fieldbus and investigates data operation of the robot workcell. Through experiments, the operations of periodic and real-time data, and non-periodic real-time data are studied. Also, the relationship between the network transmission rate and the monitoring results from the sensor is analyzed.

• Journal of the Korean Institute of Navigation
• /
• v.14 no.4
• /
• pp.31-39
• /
• 1990

A systematic methodology for efficient implementation of processor arrays from regular iterative algorithms is proposed. One of the modern parallel processing array architectures is the Systolic arrays and we use it for processor arrays on this paper. On designing the systolic arrays, there are plenty of mapping functions which satisfy necessary conditions for its implementation to the time-space domain. In this paper, we sue a few conditions to reduce the total number of computable mapping functions efficiently. As a results of applying this methodology, efficient designs of systolic arrays could be done with considerable saving on design time and efforts.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.253-256
• /
• 2000

This paper describes a DSP implementation of a real-time 3D sound localization algorithm with the use of a low power embedded DSP. A distinctive feature of this implementation is that the audible frequency band is divided into three, in accordance with the sound reflection and diffraction phenomena through different media from a certain sound source to human ears, and then in each subband a specific implementation procedure of the 3D sound localization is devised so as to operate real-time at a low frequency of 50MHz on a 16bit fixed-point DSP. Thus out DSP implementation can provide a listener with 3D sound effects through a headphone at low cost and low power consumption.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.32-32
• /
• 2000

We present CReMeS, a CORBA-compliant design and implementation of a new real-time communication service. It provide for of a new real-time communication service. It provide for efficient, predictable, and scalable communication between information producers and consumers. Experimental results demonstrate that CReMeS can achieve better performance, predictability and scalability than a Real-Time implementaion of the CORBA Event Service.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.10
• /
• pp.789-797
• /
• 2003

An implementation scheme and some improvements are proposed to adopt public-licensed operating system, Linux and de-facto world-wide network standard, TCP/IP into the field of behavior-based autonomous mobile robots. To demonstrate the needs of scheme and the improvement, an analysis is performed on a server/client communication problem with real time Linux previously proposed, and another analysis is also performed on interactions among TCP/IP communications and the performance of Linux system using them. Implementation of behavior-based control architecture on real time Linux is proposed firstly. Revised task-scheduling schemes are proposed that can enhance the performance of server/client communication among local tasks on a Linux platform. A new method of TCP/IP packet flow handling is proposed that prioritizes TCP/IP software interrupts with aperiodic server mechanism as well. To evaluate the implementation scheme and the proposed improvements, performance enhancements are shown through some simulations.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.11
• /
• pp.943-954
• /
• 2000

Fieldbus is the lowest level industrial network in the communication hierarchy of factory automation and distributed process control systems. Data generated from field devices are largely divided into three categories : time-critical, periodic and time-available data. Because these data share one fieldbus medium, it needs a method that allocates these data to the bandwidth-limited fieldbus medium. This paper introduces an implementation method of bandwidth allocation scheme on PROFIBUS. In order to implement bandwidth allocation scheme on PROFIBUS, the following functions need to be supplemented on the FDL(Fieldbus Datalink Layer) protocol: (i) separation of medium bandwidth into periodic and non-periodic intervals, (ii) synchronization of node timers over a local link. In order to examine the validity of bandwidth allocation scheme on PROFIBUS, this paper develops an experimental model of a network system. The results obtained from the experimental model show that the bandwidth allocation scheme satisfies the performance requirement of time-critical, periodic and time-available data.

• Speech Sciences
• /
• v.8 no.2
• /
• pp.73-81
• /
• 2001

In this paper, we focus on the real time implementation of the single channel adaptive noise canceller(ANC) by using TMS320C30 EVM board. The implemented single channel adaptive noise canceller is based on a reference paper [1] in which it is simulated by using the recursive average magnitude difference function(AMDF) to get a properly delayed input speech on a sample basis as a reference signal and normalized least mean square(NLMS) algorithm. To certify results of the real time implementation, we measured the processing time of the ANC and enhancement ratio according to various signalto-noise ratios(SNRs). Experimental results demonstrate that the processing time of the speech signal of 32ms length with delay estimation of every 10 samples is about 26.3 ms, and almost the same performance as given in [1] is obtained with the implemented system.