• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.147-152
• /
• 2008

The Climate Change Convention has a purpose for stabilizing the concentration of greenhouse gases of the atmosphere so that the dangerous and artificial effects may not influence atmosphere systems. We intend to present the model needed to establish the systems able to monitor and control in real time not sticking to places by grafting IPTV technique and setting the monitoring objects of the greenhouse emitting sources of industrial facilities, the estimation instruction of emissions, the guidelines of emission estimation, etc. in order to corresponding to this Climate Change Convention.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.9-16
• /
• 2018

The media facade technique requires the matching process of the content to the projection target. For this reason, each time the projection target is changed, the matching process of the same content must be performed again at each time. This problem can be solved by analyzing the elevation of the object and automatically performing matching process of the content in real time and projecting the matched content. In this paper, we propose and implement a new algorithm that can obtain the optimized matching content in real time by analyzing the elevation of the object to be projected. The proposed method processes the image matching by using the depth information of the elevation obtained by IR cameras.

• The Journal of Korean Association of Computer Education
• /
• v.6 no.3
• /
• pp.207-216
• /
• 2003

An instructor in education generally takes the objective-type evaluation for grading. The subjective-type evaluation has the merit that it can estimate the high-recognition ability, but the problem of the objectivity and reliability of the evaluation. This paper proposes the model which grades for the subjective-type evaluation. and designs and implements the evaluation system using the synonym thesaurus. This system can process the diverse and wide subjective-type questions and provide the easy usage for a beginner. It also can reduce the time and endeavor for evaluation and provide the objectivity of the evaluation. The system results the 73% success rate. We expect that this system will become a basis of the research on the subjective-type evaluation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.2
• /
• pp.172-178
• /
• 2016

The location template matching (LTM) method is a technique of identifying an impact location on a structure, and is often applied to structural health monitoring and large scale human-computer interface (HCI) systems. The LTM method utilizes a certain measure of similarity between two time signals. The correlation coefficient is most widely used for this purpose, and the group delay based method is recently proposed to improve the accuracy of finding the best matching pair of signals. In practice, one of key essential consideration for implementing the LTM method is to guarantee that a sufficient number of vibration modes must be contained in the measured signal, and yet the lower sampling rate is needed for a real-time implementation. In this paper, the properties of correlation coefficient and group delay with respect to the number of vibration modes are investigated. A few important results are obtained through extensive computer simulations and experiments. If the number of vibration modes contained in the measured signal is more than four it is sufficient for the correlation based LTM method, while the group delay based LTM method requires smaller number of vibration modes.

• Design & Manufacturing
• /
• v.9 no.1
• /
• pp.9-13
• /
• 2015

The HEV/EV Traction Motor Core manufacturing technology is a core component of Traction Motor Core is a key technology for the manufacture of eco-friendly automotive industry is essential for the competitiveness of the country must obtain the technology. This study was performed to develop a Rotor Core of the HEV/EV Traction Motor using the first time in Korea multi-gate BMC injection molding technique. Executed by the experiment of this study are as follows. Study 1: Developed a multi-gate BMC injection mold for the magnet fixed to the Rotor Core. Study 2: Developed a production implementation and manufacturing technology of the Rotor Core. In this study, the develop products and manufacturing technologies implemented by the BMC injection mold development for Magnet fixed to the Rotor Core and the results are discussed.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1221-1245
• /
• 2014

Real-time hybrid simulation (RTHS) is a promising cyber-physical technique used in the experimental evaluation of civil infrastructure systems subject to dynamic loading. In RTHS, the response of a structural system is simulated by partitioning it into physical and numerical substructures, and coupling at the interface is achieved by enforcing equilibrium and compatibility in real-time. The choice of partitioning parameters will influence the overall success of the experiment. In addition, due to the dynamics of the transfer system, communication and computation delays, the feedback force signals are dependent on the system state subject to delay. Thus, the transfer system dynamics must be accommodated by appropriate actuator controllers. In light of this, guidelines should be established to facilitate successful RTHS and clearly specify: (i) the minimum requirements of the transfer system control, (ii) the minimum required sampling frequency, and (iii) the most effective ways to stabilize an unstable simulation due to the limitations of the available transfer system. The objective of this paper is to establish a stability switch criterion due to systematic experimental errors. The RTHS stability switch criterion will provide a basis for the partitioning and design of successful RTHS.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.756-762
• /
• 1997

The experiment was carried out to fabricate alumina membrane which has a cylindrical pore structure by anodizing aluminium plate in sulfuric acid solution with the electrochemical technique. The aluminium plate for anodizing was prepared by the pretreatment process such as chemical, electro-polishing and thermal treatment. The pore size distribution and the film thickness of alumina membrane were investigated by the implementation of scanning electron microscope(SEM) and BET method. The results show that the oxide film has a geometrical structures like a Keller model and that the membrane has a uniform pore distribution. The pore size and the oxide film thickness are dependent on the anodizing process variables such as the electrolyte concentration, the reation temperature and the anodizing current density.

• 전자공학회논문지 IE
• /
• v.47 no.2
• /
• pp.1-7
• /
• 2010

This paper presents a low power digital PLL architecture and design for implementation of the PLL-based frequency synthesizers. In the proposed architecture, a wide band digital logic quadricorrelator is used for preliminary frequency detector and a narrow band digital logic quadricorrelator is used for final DCO control. Also, a circuit technique for reducing leakage current is adopted in order to minimize the standby mode power consumption of the deactivated block. The proposed digital PLL is designed and verified by MyCAD with MOSIS 1.8V $0.35{\mu}m$ CMOS technology, and the simulation results show that the power consumption can be lowered by more than 20%.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.11
• /
• pp.663-674
• /
• 2003

Bump mapping is a technique that represents the detailed parts of the object surface, such as a perturberance of the skin of a peanut, using the geometry mapping without complex modeling. However, the hardware implementation for bump mapping is considerable, because a large amount of per pixel computation, including the normal vector shading, is required. In this paper, we propose a new bump mapping algorithm using the polar coordinate system and its hardware architecture. Compared with other existing architectures, our approach performs bump mapping effectively by using a new vector rotation method for transformation into the reference space and minimizing illumination calculation. Consequently, our proposed architecture reduces a large amount of computation and hardware requirements.

• Proceedings of the Korea Database Society Conference
• /
• 1999.06a
• /
• pp.361-371
• /
• 1999

This paper is concerned with designing and implementing the Internet shopping mall by using virtual reality-driven avatar and web decision support system. Traditionally, the Internet shopping mall has been designed based on the combination of several hyperlinks, images, and tents. However, this sort of approach results in a lower performance because possible customers cannot make more accurate shopping decisions. To overcome this kind of pitfalls facing the current Internet shopping malls, we propose using a combination of virtual reality and web DSS. The main virtues of our proposed approach to designing the Internet shopping mall are as follows: First, the virtual reality technique is emerging as one of alternatives guaranteeing a sense of reality for customers' part and facilitating the complex process of shopping decision makings. Especially, the avatar, which is an artificially designed man working on the Internet, can make easy and absorbing the Internet shopping-related decision making processes. Second, the web DSS approach can provide an effective decision support mechanism for customers. Especially, we design a set of intelligent agents for the proposed web DSS. Experimental results with an illustrative example showed that our proposed approach can yield a new Internet shopping mall paradigm with which customers can benefit from a high level of decision support functions.