• ETRI Journal
• /
• 제38권3호
• /
• pp.417-424
• /
• 2016

In this paper, an accurate characterization of a fabricated X-band transmit/receive module is described with the process of generating control data to correct amplitude and phase deviations in an active electronically scanned array antenna unit. In the characterization, quantization errors (from both a digitally controlled attenuator and a phase shifter) are considered using not theoretical values (due to discrete sets of amplitude and phase states) but measured values (of which implementation errors are a part). By using the presented procedure for the characterization, each initial control bit of both the attenuator and the phase shifter is closest to the required value for each array element position. In addition, each compensated control bit for the parasitic cross effect between amplitude and phase control is decided using the same procedure. Reduction of the peak sidelobe level of an array antenna is presented as an example to validate the proposed procedure.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.87-91
• /
• 2009

Welding is one of the most important joining processes and the effect of welding residual stresses in the structure has a great deal of influence on its quality. In this paper, recent development in computational welding mechanics, particularly calculation of welding residual stresses, is introduced. The hypoelastic formulation of finite element analysis for thermoelastic-plastic deformation is applied to welding processes to find residual deformations and stresses. Leblond's phase evolution equation coupled with the energy equation is employed to calculate the phase volume fraction; this plays an important role as a kinetics parameter affecting phase fraction effects in the mechanical constitutive equation of welded materials. Furthermore, transformation plasticity is taken into account for an accurate evaluation of stress. The influence of the phase transformation and the transformation plasticity on residual stress is investigated by means of numerical analyses using metallurgical parameters in Leblond's phase evolution equation that are adjusted with respect to various cooling rates in a CCT-diagram. Coding implementation is conducted by way of the ABAQUS user subroutines, UMAT.

• 조명전기설비학회논문지
• /
• 제22권12호
• /
• pp.157-163
• /
• 2008

다상 교호 컨버터에서 인덕턴스가 불일치 할 때 첨두전류 제어기를 사용하는 경우에 각 상의 평균 전류는 동일하지 않다. 본 논문에서는 각 상의 인덕턴스가 불일치한 경우에 첨두전류 모드에서 평균전류가 동일해지는 전류분배 제어기를 제안한다 제어기는 과도상태에서도 전류의 평형이 잘 이루어질 수 있도록 설계한다. 제안된 방법을 2상과 4상 교호 승압컨버터에 적용시켰으며, 실험 결과를 통해 인덕턴스가 불일치한 경우에도 첨두전류 모드에서 전류평형이 잘 이루어짐을 보인다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권3호
• /
• pp.127-133
• /
• 2004

This paper presents a prototype of three-phase current source zero voltage soft-switching PWM controlled PFC rectifier with Single Active Auxiliary Resonant Commutated Snubber (ARCS) circuit topology. The proposed three-phase PFC rectifier with sinewave current shaping and unity power factor scheme can operate under a condition of Zero Voltage Soft Switching (ZVS) in the main three phase rectifier circuit and zero current soft switching (ZCS) in auxiliary snubber circuits. The operating principle and steady-state performances of the proposed three-phase current source soft-switching PWM controlled PFC rectifier controlled by the DSP control implementation are evaluated and discussed on the basis of the experimental results of this active rectifier setup.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제3권2호
• /
• pp.87-92
• /
• 2014

본 논문에서는 스마트폰 내장 가속도 센서를 이용한 2단계 행위 인식 시스템을 제안한다. 제안하는 행위 인식 시스템에서는 각 행위 별 가속도 데이터의 시간적 변화 패턴을 충분히 반영하기 위해, 1단계에서는 결정트리(DT) 학습을 수행하고, 2단계에서는 1단계 분류 결과들의 시퀀스를 이용하여 은닉 마코프 모델(HMM) 학습을 수행한다. 또한, 견고한 행위 인식기를 얻기 위해, 동일한 행위에 대해 서로 사용자와 서로 다른 스마트폰 위치와 방향으로부터 수집한 다양한 대용량 데이터를 이용하여 본 시스템을 훈련하였다. 6가지 실내 행위들에 대해 수집한 6720개의 가속도 센서 데이터를 이용한 실험을 통해, 본 시스템은 앞서 설명한 설계 방식을 기초로 높은 인식 성능을 보여주었다.

• 전력전자학회논문지
• /
• 제7권3호
• /
• pp.224-236
• /
• 2002

PWM기법의 성능을 비교하고 있다. 랜덤 펄스 위치 PWM기법은 2상 또는 3상 펄스들을 변조 구간내의 임의의 위치에 랜덤하게 배치하고 인버터 스위칭에 의하여 고조파의 스펙트럼을 광역화하는 RPWM기법이다. 시뮬레이션과 실험에 의하여 인버터 출력 전압의 고조파 스펙트럼과 맥동 전류 파형 그리고 모터의 가청 스위칭 소음의 저감 효과를 비교 검토하였다. 스위칭 손실 및 연산시간 그리고 구현의 용이성에서 3상 RPWM보다는 2상 RPWM이 양호하며, 고조파의 광대역화 측면에서는 3상 RPWM이 보다 좋은 성능을 지니고 있음을 알 수 있었다. 또한 가청 스위칭 소음저감은 2상 RPWM과 3상 RPWM이 거의 유사한 성능을 갖고 있음이 확인되었다.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1513-1525
• /
• 2016

Rapid and accurate phase synchronization is critical for the reliable control of grid-tied inverters. However, the commonly used software phase-locked loop methods do not always satisfy the need for high-speed and accurate phase synchronization under severe grid imbalance conditions. To address this problem, this study develops a novel open-loop phase locking scheme based on a synchronous reference frame. The proposed scheme is characterized by remarkable response speed, high accuracy, and easy implementation. It comprises three functional cascaded blocks: fast orthogonal signal generation block, fast fundamental-frequency positive sequence component construction block, and fast phase calculation block. The developed virtual orthogonal signal generation method in the first block, which is characterized by noise immunity and high accuracy, can effectively avoid approximation errors and noise amplification in a wide range of sampling frequencies. In the second block, which is the foundation for achieving fast phase synchronization within 3 ms, the fundamental-frequency positive sequence components of unsymmetrical grid voltages can be achieved with the developed orthogonal signal construction strategy and the symmetrical component method. The real-time grid phase can be consequently obtained in the third block, which is free from self-tuning closed-loop control and thus improves the dynamic performance of the proposed scheme. The proposed scheme is adaptive to severe unsymmetrical grid voltages with sudden changes in magnitude, phase, and/or frequency. Moreover, this scheme is able to eliminate phase errors induced by harmonics and random noise. The validity and utility of the proposed scheme are verified by the experimental results.

• 한국정보통신학회논문지
• /
• 제20권10호
• /
• pp.1973-1979
• /
• 2016

기술이 발전하면서 카메라를 통해 3D 측정을 하는 방법은 계속 발전되어왔고 최근에는 여러 주기의 fringe pattern을 이용한 측정 방법을 쓰고 있다. 본 논문에서는 여러 주기의 fringe pattern을 이용한 3D 측정 방법에 대한 기존 방법의 문제점을 제시하고, 이에 대한 해결 방안으로 기준면의 절대위상과 물체의 위상차를 이용한 물체의 절대위상을 구하는 방법을 제안한다. 이를 이용하면 새로운 물체에 대해서 매번 여러 주기의 fringe pattern을 조사하지 않고 물체의 절대위상을 얻을 수 있다. 따라서 제안하는 방법을 이용하면, 측정단계에서 취득하는 영상의 개수가 적기 때문에 보다 빠른 속도로 3D 측정을 할 수 있다. 실험을 통하여 제안하는 방법의 유용성을 보였다.

• 경영과학
• /
• 제14권2호
• /
• pp.113-137
• /
• 1997

Intranet emerges as a key technology for building enterprise information system. This paper proposes a scenario-based object- oriented technique for designing intranet hypermedia information systems. The method consists of six phases such as domain analysis, object modeling, view design, navigational design, implementation design and construction. Users requirements are analyzed in the form of scenarios by the use fo a responsibility-driven object technology. Object-oriented views are generated from the resulting object model and then used for the subsequent navigational and implementation design. Implementation design phase deals integrating enterprise databases with distributed hypermedia systems by employing Java language. To demonstrate its usefulness, a real-life bank case is illustrated.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.107-108
• /
• 2012

This paper presents design and implementation of the LDC(1.8 kW DC-DC Converter for Electric Vehicles). For Implementation of the LDC, the adapted topology is ZVS(Zero Voltage Switching) PSFB(Phase Shift Full Bridge) with Digital Control is adopted. Also, for the purpose of stable operation of the LDC in vehicle with variable electrical load condition, Continuous Voltage and Current Limit Control scheme based on PI controller are developed. According to real-car test mode, the prototype of proposed the LDC is verified with performance and stability. Thus, optimizing design and implement of the LDC are discussed, and experimental results are presented.