• Journal of Power Electronics
• /
• v.4 no.2
• /
• pp.65-76
• /
• 2004

In this paper, the steady-state analysis of the three-phase self-excited induction generator (SEIG) driven by a variable-speed prime mover (VSPM) such as a wind turbine is presented. The steady-state torque-speed characteristics of the VSPM are considered with the three-phase SEIG equivalent circuit for evaluating the operating performances due to the inductive load variations. Furthermore, a PI closed-loop feedback voltage regulation scheme based on the static VAR compensator (SVC) for the three-phase SEIG driven by the VSPM is designed and considered for the wind power generation conditioner. The simulation and experimental results prove the practical effectiveness of the additional SVC with the PI controller-based feedback loop in terms of fast response and high performances.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.152-155
• /
• 2009

In high power application, PFC(Power Factor Correction) pre-regulators are generally required. PFC pre-regulators could achieve unity power factor, reduce line input current harmonics and utilize full line power. Interleaving PFC converters could reduce input ripple current, output capacitor ripple current and inductor size. With this closed loop interleaving method, both two phase converters are working at the boundary between continuous and discontinuous mode and accurate 180 degree phase shift is achieved. Implementation of this strategy could be easily integrated to the control chip. Finally, experimental results of a two-phase interleaved boost PFC are presented to verify the discussed features.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.3
• /
• pp.231-239
• /
• 2017

A novel current control technique with fast response and application in an unbalanced system is proposed in this paper. Contrary to the conventional PI and dead-beat current control techniques, the proposed method is adopted to the valley current mode control (VCMC) and average current mode control (ACMC) methods to overcome the phase delay caused by conventional methods. The advantages of the proposed system are simplicity of structure and ease of implementation. The VCMC and ACMC methods are established and applied to the buck converter, boost converter, three-phase PWM converter, and three-phase inverter. The control performances of the proposed systems are shown by computer simulations and verified by experimental results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.194-196
• /
• 2021

This focuses on the Cultivation Plan Service at the preliminary production phase is critical in that it supports agricultural producers' decision by providing related information such as predicted crop production or expected profits for consulting or other agricultural information when they plan to cultivate. This paper describes the reference architecture of the farming sector will benefit immensely from the implementation of farming data in farming contents repository which will serve as the knowledge base for the Cultivation Plan Service at the pre-production stage based on Big data analysis.

• Journal of Power Electronics
• /
• v.14 no.1
• /
• pp.115-124
• /
• 2014

This paper presents the implementation of two-arm modulation (TAM) technique for the independent control of a two-induction motor drive fed by a five-leg inverter (FLI). A carrier-based space vector pulse width modulation technique for TAM is proposed to generate switching signals for FLI. Two independent three-phase space vector modulators are utilized to control two motors. The motor drive system applies two separate indirect field-oriented control methods. The stationary voltage outputs from the vector control are synthesized in the three-phase space vector modulator to generate switching signals for FLI. The performance of the independent control of the motors and the voltage utilization factor are likewise analyzed. Simulation and experimental results verify the effectiveness of the proposed method for the independent control of the two-motor drive system. The proposed technique is successfully validated by dSPACE DS1103 experimental work.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.3
• /
• pp.27-34
• /
• 2004

As software developing paradigm has been changing to complicate Web environment, study of complexity becomes vigorous. Yet still it seems that general agreement has not to be reached to architecture or complexity measure of Web application. And so traditional complexity metrics - program size(LOC) and Cyclomatic Complexity can be derived from the source code after implementation. it is not helpful to the early phase of software development life cycle - analysis and design phase. In this study 6 Web projects has been used for deriving applications with possible errors suited by Complexity Indicator. Using 61 programs derived, linear correlation between complexity, number of classes and number of methods has been proposed. As Web application complexity could be estimated before implementation, effort and cost management will be processed more effectively.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.174-178
• /
• 2001

An improved stationary frame-based digital current control technique for a permanent magnet (PM) synchronous motor is presented. Generally, the stationary frame current controller is known to provide the advantage of a simple implementation. However, there are some unavoidable limitations such as a steady-state error and a phase delay in the steady-state. On the other hand, in the synchronous frame current regulator, the regulated currents are dc quantities and a zero steady-state error can be obtained through the integral control. However, the need to transform the signals between the stationary and synchronous frames makes the implementation of a synchronous frame regulator complex. Although the PI controller in the stationary frame gives a steady-state error and a phase delay, the control performance can be greatly improved by employing the exact decoupling control inputs for the back EMF, resulting in an ideal steady-state control characteristics irrespective of an operating condition as in the synchronous PI decoupling controller. However, its steady-state response may be degraded due to the inexact cancellation inputs under the parameter variations. To improve the control performance in the stationary frame, the disturbance is estimated using the time delay control. The proposed scheme is implemented on a PM synchronous motor using DSP TMS320C31 and the effectiveness is verified through the comparative simulations and experiments.

• Asia pacific journal of information systems
• /
• v.7 no.1
• /
• pp.99-111
• /
• 1997

This paper presents an application of an artificial neural net to the implementation of decision class analysis (DCA), together with the generation of a decision model influence diagram. The diagram is well-known as a good tool for knowledge representation of complex decision problems. Generating influence diagram model is known to in practice require much time and effort, and the resulting model can be generally applicable to only a specific decision problem. In order to reduce the burden of modeling decision problems, the concept of DCA is introduced. DCA treats a set of decision problems having some degree of similarityz as a single unit. We propose a method utilizing a feedforward neural net with supervised learning rule to develop DCA based on influence diagram, which method consists of two phases: Phase l is to search for relevant chance and value nodes of an individual influence diagram from given decision and specific situations and Phase II elicits arcs among the nodes in the diagram. We also examine the results of neural net simulation with an example of a class of decision problems.

• Korean Journal of Optics and Photonics
• /
• v.8 no.5
• /
• pp.426-430
• /
• 1997

A signal processor is implemented to verify the possibility of a closed-loop signal processing for the open-loop fiber-optic gyroscope (FOG). As an all-digital implementation of phase tracking scheme, it does analog-to digital conversion of the detector output and signal processing all-digitally thereafter for a noise-immune FOG signal processor. It has a potential of 36-bits resolution in the $2\pi$ range which is best in the number and sets no limit in the magnitude of the phase shift. The new signal processor was tested on an all-fiber gyroscope and turned out to have a resolution of $3\mu$rad(corresponds to 0.74 deg/hr), which is good enough to measure the Earth's rotation rate.

• Journal of Power Electronics
• /
• v.1 no.2
• /
• pp.88-98
• /
• 2001

An improved stationary frame-based digital current control technique for a permanent magnet(PM) synchronous motor is presented. Generally, the stationary frame current controller is known to provide the advantage of a simple implementation. However, there are some unavoidable limitations such as a steady-state error and a phase delay in the steady-state. On the other hand, in the synchronous frame current regulator the regulated currents are dc quantities and a zero steady-state error can be obtained through the integral control. However, the need to transform the signals between the stationary and synchronous frames makes the implementation of a synchronous frame regulator complex. Although the PI controller in the stationary frame gives a steady-state error and a phase delay, the control performance can be greatly improved by employing the exact decoupling control inputs for the back EMF., resulting in an ideal steady-state control characteristics irrespective of an operating condition as in the synchronous PI decoupling controller. However, its steady-state response may be degraded due to the inexact cancellation inputs under the parameter variations. To improve the control performance in the stationary frame, the disturbance is estimated using the time delay control. The proposed scheme is implemented on a PM synchronous motor using DSP TMS320C31 and the effectiveness is verified through the comparative simulations and experiments.