• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.2
• /
• pp.84-89
• /
• 2015

We report the eventually successful treatment of a huge bone defect and peri-implantitis following reconstruction of a previously failed intra-mobile cylinder implant system (IMZ) implant site using distraction osteogenesis (DO). In the anterior mandible, two IMZ implants failed and surgical debridement was performed in accordance to the patient's needs. Thereafter, mobility and suppuration were decreased and the patient visited the dental clinic on a regular basis for oral health maintenance. However, the inflammation did not resolve, and the bone destruction around the implants progressed for 4 years. Finally, the implants failed and a severe bone defect remained after implant removal. To reconstruct the bone defects, we attempted bone graft procedures. Titanium mesh was unsuccessfully used to obtain bone volume regeneration. However, DO subsequently was used to obtain sufficient bone volume for implant placement. The new implants were then installed, followed by prosthetic procedures. In conclusion, progression of peri-implantitis could not be arrested despite surgical intervention and repeated maintenance care for 3 years. Reconstruction of the peri-implantitis site was complicated due to its horizontal and vertical bone defects. Lesions caused by implant failure require an aggressive regenerative strategy, such as DO. DO was successful in reconstruction of a peri-implantitis site that was complicated due to horizontal and vertical bone defects.

• Archives of Plastic Surgery
• /
• v.42 no.3
• /
• pp.309-315
• /
• 2015

Background Breast projection is a critical element of breast reconstruction aesthetics, but little has been published regarding breast projection as the firm expander is changed to a softer implant. Quantitative data representing this loss in projection may enhance patient education and improve our management of patient expectations. Methods Female patients who were undergoing immediate tissue-expander breast reconstruction with the senior author were enrolled in this prospective study. Three-dimensional camera software was used for all patient photographs and data analysis. Projection was calculated as the distance between the chest wall and the point of maximal projection of the breast form. Values were calculated for final tissue expander expansion and at varying intervals 3, 6, and 12 months after implant placement. Results Fourteen breasts from 12 patients were included in the final analysis. Twelve of the 14 breasts had a loss of projection at three months following the implant placement or beyond. The percentage of projection lost in these 12 breasts ranged from 6.30% to 43.4%, with an average loss of projection of 21.05%. Conclusions This study is the first prospective quantitative analysis of temporal changes in breast projection after expander-implant reconstruction. By prospectively capturing projection data with three-dimensional photographic software, we reveal a loss of projection in this population by three months post-implant exchange. These findings will not only aid in managing patient expectations, but our methodology provides a foundation for future objective studies of the breast form.

• Archives of Plastic Surgery
• /
• v.44 no.6
• /
• pp.516-522
• /
• 2017

Background Implant-based breast reconstruction is being performed more frequently, and implants are associated with an increased risk of infection. We reviewed the clinical features of cases of implant infection and investigated the risk factors for breast device salvage failure. Methods We retrospectively analyzed 771 patients who underwent implant-based breast reconstruction between January 2010 and December 2016. Age, body mass index, chemotherapy history, radiation exposure, and smoking history were assessed as potential risk factors for postoperative infection. We also evaluated the presence and onset of infection symptoms, wound culture pathogens, and other complications, including seroma, hematoma, and mastectomy skin necrosis. Additionally, we examined the mastectomy type, the use of acellular dermal matrix, the presence of an underlying disease such as hypertension or diabetes, and axillary node dissection. Results The total infection rate was 4.99% (58 of 1,163 cases) and the total salvage rate was 58.6% (34 of 58). The postoperative duration to closed suction drain removal was significantly different between the cellulitis and implant removal groups. Staphylococcus aureus infection was most frequently found, with methicillin resistance in 37.5% of the cases of explantation. Explantation after infection was performed more often in patients who had undergone 2-stage expander/implant reconstruction than in those who had undergone direct-to-implant reconstruction. Conclusions Preventing infection is essential in implant-based breast reconstruction. The high salvage rate argues against early implant removal. However, when infection is due to methicillin-resistant S. aureus and the patient's clinical symptoms do not improve, surgeons should consider implant removal.

• Journal of Interdisciplinary Genomics
• /
• v.4 no.1
• /
• pp.1-6
• /
• 2022

Purpose: Mastectomy is performed as a surgical treatment for patients with breast cancer who have the BRCA 1/2 mutation. In this study, we have reported the trends in Korea for both immediate breast reconstruction and prophylactic mastectomy. Methods: This retrospective study was conducted from 2019 to 2021. Both skin-sparing mastectomy and immediate implant-based breast reconstruction with prepectoral and/or subpectoral techniques were performed in five patients with BRCA 1/2 mutations. Data on age; body mass index; cancer stage; BRCA 1/2 mutation; estrogen receptor, progesterone receptor, and human epidermal growth factor receptor 2 expression; diagnosis; and complications were collected. Results: The average (±standard deviation [SD]) age was 44.0±6.48 years old; BMI 24.5±2.25 kg/m²; and breast volumes were 365.8±70.34 and 382.4±96.33 cc for right and left ones, respectively. The BRCA 1 and 2 were diagnosed in four and one patients, respectively. The estrogen and progesterone receptors and human epidermal growth factor receptor 2 were detected in one (20%), one (20%), and three (60%) patients, respectively. The applied implant-based breast reconstruction techniques for ten breasts were subpectoral technique (n=7, 70%) and prepectoral technique (n=3, 30%). For the cancer stage, those with I, II, and III stages were one (20%), two (40%), and one (20%), respectively. There were no major complications such as Infection, seroma. Conclusion: When mastectomy is performed as surgical treatment in BRCA 1/2 mutation positive breast cancer patients, it is possible to obtain a better outcome with both implant-based breast reconstruction and different circumstances between breast cancer and contralateral breast.

• The Journal of the Korean dental association
• /
• v.41 no.8 s.411
• /
• pp.566-571
• /
• 2003

Now a days, immediate implant placement: is becoming one of the popular method. But for the success of this method in implant surgery, initial stability and establishment of sufficient blood supply to the implant placement: areas are very important. Buccal Fat Pad(BFP) has favorable characteristics for the reconstruction of maxillary hard &soft tissue defects. So it has been used for reconstruction of posterior maxillary area or closure of oro-antral area. Using BFP, we could get primary tissue closure without extensive releasing incision during implant surgery and adequate attached gingival after healing of the surgical area. So We report clinical usefulness of BFG during immediate important placement in the posterior maxillary area

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.808-814
• /
• 2011

Purpose: Despite wide clinical use of breast implants, there is continued concern about the lifespan of these devices. The causes of explantation were infection, deflation of implant and patient's want. The deflation of saline-filled breast implant was related to strength and durability of implant shell. The purpose of this study is to evaluate the clinical durability of saline-filled breast implant through the analysis of duration until deflation occurred, causes, incidence and influencing factors. Methods: Retrospective analyses were conducted on clinical records for 19 cases of deflation of saline-filled breast implant from 201 cases of breast reconstruction with saline-filled implant between May 1995 and June 2011. The authors had been analyzed the causes of deflation, survival duration, symptom, sign, nipple excision, volume of implant, saline filling, method of reoperation, breast cancer stage and combined capsular contracture. Results: The causes of deflation were attributed to the cases that cannot be evaluated the causes in 15 cases, fall down in 1 case, mammography in 2 cases, accidental needle injury in 1 case. Mean survival duration was 4 years and 5 months. The duration of survival was less than 1 year for 5 cases, 1 year to 10 years for 10 cases, more than 10 years for 4 cases. The volume between 201 and 250 cc of deflated breast implant was rated as high by 14.0 percent. The deflation rate of underfilled implants was 11.4 percent, adequate filled implants was 9.3 percent. None of overfilled implant was deflated. The deflation of smooth surface implant was 5 of 152 cases. Textured implant was 14 of 49 cases. The capsular contracture of non-deflated breast implant was 28 of 182 cases and that of deflated breast implant was 6 of 19 cases. Conclusion: The patients who underwent saline-filled breast implant implantation should be informed that their implant could deflate. The analysis of clinical durability and causes of deflation in breast implant was important for the prediction and prevention of reopeation. The authors could suppose the causes of deflation of saline-filled breast implant through history, duration of survival, inspection of the shell of implant.

• Archives of Plastic Surgery
• /
• v.40 no.4
• /
• pp.374-379
• /
• 2013

Background To date, various types of acellular dermal matrix (ADM) have been developed for clinical use. AlloDerm is the most familiar type of ADM to most surgeons in breast reconstruction. It is prepared by freeze-drying. CG CryoDerm is the first form of ADM that requires no drying process. Therefore, theoretically, it has a higher degree of preservation of the dermal structures than AlloDerm. We conducted this study to compare the clinical course and postoperative outcomes of patients who underwent direct-to-implant breast reconstructions using AlloDerm and those who did using CG CryoDerm. Methods We performed a retrospective analysis of the medical records in a consecutive series of 50 patients who underwent direct-to-implant breast reconstruction using AlloDerm (n=31) or CryoDerm (n=19). We then compared the clinical course and postoperative outcomes of the two groups based on the overall incidence of complications and the duration of drainage. Results The mean follow-up period was 16 months. There were no significant differences in the overall incidence of complications (seroma, infection, skin flap necrosis, capsular contracture, and implant loss) between the two groups. Nor was there any significant difference in the duration of drainage. Conclusions CG CryoDerm has the merits of short preparation time and easy handling during surgery. Our results indicate that CG CryoDerm might be an alternative allograft material to AlloDerm in direct-to-implant breast reconstruction.

• Archives of Plastic Surgery
• /
• v.34 no.3
• /
• pp.346-351
• /
• 2007

Purpose: As a rare congenital anomaly, Poland's syndrome has been known to show hypoplasia in breast and nipple, absence of pectoralis major muscle, and aplasia or deformity of rib or costal cartilage which has been reported to be more common in male. However, most patients who are seeking operation are female patients having one-side deformity. In the field of plastic surgery, the major surgical indications could be asymmetric chest wall depression in man or breast hypoplasia in woman. There are many reconstruction options according to the degree of patient's deformity: a prosthetic implant, breast implant with or without tissue expander, latissimus dorsi musculocutaneous pedicled flap with or without implant and/or tissue expander, and free tissue transfer with or without tissue expander. Methods: The authors have treated 4 patients(2 male, 2 female) who had a diagnosis of Poland's syndrome. According to the degree of patient's deformity, all patients underwent correction of breast asymmetry and unilateral anterior thoracic hypoplasia with one-staged or two-staged reconstruction. Results: All patents were satisfied with the results and there occurred no specific complications. Conclusion: The authors propose the treatment plan for patient with Poland's syndrome, according to the degree of patient's deformity. In case of male patient with mild deformity, the prosthetic implant or latissimus dorsi musculocutaneous pedicled flap will simulate the missing pectoralis and improve the contour deformity. In case of female patient with moderate to severe breast asymmetry and upward displaced nipple areolar complex (NAC), NAC can be lowered with tissue expander, breast can be enlarged with autologous free flaps or latissimus dorsi musculocutaneous pedicled flap with implant.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.2
• /
• pp.145-155
• /
• 2007

The advent of osseointegration and advances in biomaterials and techniques have contributed to increased application of dental implants in the restoration of maxillary partial edentulous patients. Often, in these patients, soft and hard tissue defects result from a variety of causes, such as infection, trauma, and tooth loss. These create an anatomically less favorable foundation for ideal implant placement. Reconstruction of the atrophic maxillary alveolar bone through a variety of regenerative surgical procedures has become predictable; it may be necessary prior to implant placement or simultaneously at the time of implant surgery to provide a restoration with a good long-term prognosis. Regenerative procedures are used for horizontal and vertical ridge augmentation. Many different techniques exist for effective bone augmentation. The approach is largely dependent on the extent of the defect and specific procedures to be performed for the implant reconstruction. It is most appropriate to use an evidenced-based approach when a treatment plan is being developed for bone augmentation cases. The cases presented in this article clinically demonstrate the efficacy of using a autogenous block graft, guided bone regeneration, ridge split, immediated implant placement technique on the atrophic maxillary area.

• Archives of Craniofacial Surgery
• /
• v.16 no.1
• /
• pp.11-16
• /
• 2015

Background: Source material used to fill calvarial defects includes autologous bones and synthetic alternatives. While autologous bone is preferable to synthetic material, autologous reconstruction is not always feasible due to defect size, unacceptable donor-site morbidity, and other issues. Today, advanced three-dimensional (3D) printing techniques allow for fabrication of titanium implants customized to the exact need of individual patients with calvarial defects. In this report, we present three cases of calvarial reconstructions using 3D-printed porous titanium implants. Methods: From 2013 through 2014, three calvarial defects were repaired using custom-made 3D porous titanium implants. The defects were due either to traumatic subdural hematoma or to meningioma and were located in parieto-occipital, fronto-temporo-parietal, and parieto-temporal areas. The implants were prepared using individual 3D computed tomography (CT) data, Mimics software, and an electron beam melting machine. For each patient, several designs of the implant were evaluated against 3D-printed skull models. All three cases had a custom-made 3D porous titanium implant laid on the defect and rigid fixation was done with 8 mm screws. Results: The custom-made 3D implants fit each patient's skull defect precisely without any dead space. The operative site healed without any specific complications. Postoperative CTs revealed the implants to be in correct position. Conclusion: An autologous graft is not a feasible option in the reconstruction of large calvarial defects. Ideally, synthetic materials for calvarial reconstruction should be easily applicable, durable, and strong. In these aspects, a 3D titanium implant can be an optimal source material in calvarial reconstruction.