• Clinics in Shoulder and Elbow
• /
• v.14 no.1
• /
• pp.99-104
• /
• 2011

Purpose: Total elbow arthroplasty (TEA) is still in its infancy as compared with other forms of arthroplasty. TEA designs have evolved with experience, but comparatively little long-term outcome data is available. This article provides an overview of the current states of linked, unlinked, and convertible total elbow arthroplasty. Material and Method: The designs of total elbow prostheses can be subdivided into three categories: unlinked, linked, and convertible. This article provides an overview of the current states of linked, unlinked, and convertible total elbow arthroplasty. Results and Conclusion: By proper patient selection and by utilizing implant design advances, improvements in cementation techniques, a meticulous surgical technique, and appropriate postoperative rehabilitation, total elbow arthroplasty can provide a high level of patient satisfaction and pain relief.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.12
• /
• pp.138-145
• /
• 2009

Custom medical treatment is being widely adapted to lots of medical applications. A technology for 3D modeling is strongly required to fabricate medical implants for individual patient. Needs on true 3D CAD data of a patient is strongly required for tissue engineering and human body simulations. Medical imaging devices show human inner section and 3D volume rendering images of human organs. CT or MRI is one of the popular imaging devices for that use. However, those image data is not sufficient to use for medical fabrication or simulation. This paper mainly deals how to generate 3D geometry data from those medical images. A new image processing technology is introduced to reconstruct 3D geometry of a human body vacancy from the medical images. Then a surface geometry data is reconstructed by using Marching cube algorithm. Resulting CAD data is a custom 3D geometry data of human vacancy. This paper introduces a novel 3D reconstruction process and shows some typical examples with implemented software.

• Journal of Periodontal and Implant Science
• /
• v.40 no.4
• /
• pp.164-171
• /
• 2010

Purpose: This study compared the total antioxidant status (TAS) and superoxide dismutase (SOD) activity in the saliva of periodontally compromised patients before and after scaling and root planing (SRP) to assess their diagnostic utility. Methods: Severe chronic periodontitis patient (test group) and subjects with no attachment loss, sites showing a 3 mm or more probing depth and a sulcus bleeding index < 10% (control group) were enrolled in this study. Saliva sampling and clinical examination were performed at one week, one month and 3 months after SRP. The TAS and SOD activity in each patient's saliva was measured for the comparative analysis between the groups. Results: In the test group, the TAS decreased directly after SRP. With time, it increased slightly and was relatively unchanged compared to the baseline. In the control group, the TAS also decreased immediately after SRP but increased gradually with time until 3 months. The SOD activity in the test and control subjects decreased immediately after SRP until 1 month. At 3 months, the SOD activity had increased. Both groups had a similar profile of SOD activity. However, the SOD activity of the control group was significantly higher than that of the test group at each point in time (P < 0.05). Conclusions: There was a significant difference in the total salivary antioxidant level between the periodontitis and healthy or gingivitis (control) group during the experiment period. The total antioxidant level in the saliva was higher in the patients with severe chronic periodontitis than the healthy or gingivitis control before SRP. The SOD activity of the periodontitis patients was lower than the control at each time point. These findings conclusively reveal the possible use of saliva as a diagnostic tool for periodontal health.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.225-234
• /
• 2002

The purpose of this study was to evaluate the relationship between the osteoporotic condition and periodontal condition in postmenopausal women with periodontitis. Forty three female postmenopausal patients with no systemic disease were grouped into 3 groups by their periodontal conditions; 12 mild periodontitis, 11 moderate periodontitis and 20 advanced periodontitis. From each patient, age of menopause was taken, alkaline phosphatase(ALP) and osteocalcin (OC) in blood and deoxypyridinoline (DPD) in urine were measured. Bone mineral density (BMD) of lumbar spine (L2-L4) was measured by dual energy X-ray absorptiometry. Periodontal and osteoporotic parameters were compared among the groups and correlation coefficient between them was evaluated. The blood ALP and OC levels were similar among the groups with different periodontal condition, whereas the urine DPD level and BMD were significantly lower in advanced periodontitis group than the other groups(p<0.01). Probing depth was negatively related with BMD (r=-0.5, p<0.01) and positively related with patient age and the duration of menopause (r= 0.32 and 0.35 respectively, p<0.05). Clinical attachment loss was negatively related with BMD (r=-0.66, p<0.01), and positively related with urine DPD (r= 0.37, p<0.05). These results showed that postmenopausal women with advanced periodontitis had significantly decreased bone mineral density and suggests that decreased bone mineral density in postmenopausal women could be associated with periodontal tissue breakdown.

• Journal of Periodontal and Implant Science
• /
• v.38 no.1
• /
• pp.91-96
• /
• 2008

Purpose: One of the main objectives of periodontal reconstructive surgery is the coverage of exposed roots that occur due to gingival recession. and Aestheic concerns are usually the reason to perform root coverage procedure. This case report was performed to evaluate the effect of root coverage using subepithelial connective tissue graft(SCTG) on Miller's Class I marginal tissue recession. Materials and Methods: One patient, with two Miller's class I marginal tissue recession on both maxiallay canines, was treated with root coverage using SCTG (modified Nelson's technique). At baseline, the following measurements were recorded: 1) recession depth; 2) width of keratinized giniga. At 9, 10 months post-surgery, all clinical measurements were repeated. Result: 1) The mean root coverage from baseline to 9, 10 months post-surgery was 92.3%. 2) The mean recession depth decreased from 6.5 mm to 0.5 mm. 3) The mean width of keratinized gingiva increased from 1.25 mm to 3.5 mm. Conclusion: Within the above results, root coverage using SCTG is an effective procedure to cover Miller's class I marginal tissue recession defect. Also, patient with aesthetic concern could be satisfied with this result.

• Journal of Periodontal and Implant Science
• /
• v.39 no.1
• /
• pp.95-102
• /
• 2009

Purpose: The aim of this report is to investigate the efficacy of anorganic bovine bone xenograft(Bio-$Oss^{(R)}$) at maxillary sinus floor augmentation. Materials and methods: Two male patients who missed maxillary posterior teeth were included. They were performed maxillary sinus floor augmentation using anorganic bovine bone xenograft(Bio-$Oss^{(R)}$). After 10 or 13 months, the regenerated tissues were harvested using trephine drills with 2 or 4mm diameter and non-decalcified specimens were made. The specimens were examined histologically and histomorphometrically to investigate graft resorption and new bone formation. Results: Newly formed bone was in contact with Bio-$Oss^{(R)}$ particles directly without any gap between the bone and the particles. The proportions of newly formed bone were $23.4{\sim}25.3%$ in patient 1(Pt.1) and 28.8% in patient 2(Pt.2). And the proportions of remained Bio-$Oss^{(R)}$ were $29.7{\sim}30.2%$ in Pt.1 and 29.2% in Pt.2. The fixtures installed at augmented area showed good stability and the augmented bone height was maintained well. Conclusion: Anorganic bovine bone xenograft(Bio-$Oss^{(R)}$) has high osteoconductivity and helps new bone formation, so that it can be used in maxillary sinus floor augmentation.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.849-857
• /
• 2007

Purpose: The purposes of this study were to compare and quantify the expressions of RANK and RANKL in the gingival tissues of non-periodontitis patient and patients with chronic periodontitis, in order to understand the contribution of these proteins to periodontal destruction. Material and methods: Gingival tissue samples were obtained during periodontal surgery or tooth extraction. According to the patient's systemic condition & clinical criteria of gingiva, each gingival sample was divided into two groups. Group 1 (n=8) is clinically healthy gingiva without bleeding and no evidence of bone resorption or periodontal pockets, obtained from non-periodontitis patients. Group 2 (n=8) is inflammed gingiva from patients with chronic periodontitis. Tissue samples were prepared and analyzed by Western blotting. The quantification of RANK and RANKL were performed using a densitometer and statistically analyzed by Student's t-Test. Results: The expression of RANK were similar in group 1 and 2. The difference between group 1 and 2 was not statistically significant. And the mean amount of RANKL was more increased in group 2 than group 1. The difference between group 1 and group 2 was statistically significant. Conclusion: The expression level RANK didn't show any significant difference between healthy tissue from non-periodontitis patients and inflamed tissue from chronic periodontitis, but the expression level of RANKL in inflammed tissue from chronic periodontitis showed significantly increased tendency compared to healthy gingiva from non-periodontitis patients. Therefore, characteristics of RANK and RANKL in progress of chronic periodontitis would be basis of further studies in diagnostic method and treatment index of the disease.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.4
• /
• pp.228-234
• /
• 2019

Parkinson's disease is a neurological disorder characterized by tremor, bradykinesia, akinesia, postural instability, and muscular rigidity, which is caused by the depletion of neurotransmitters such as dopamine. Cooperative dental treatment is more challenging because of tremor of Parkinson's disease. In this case, a 47-year-old Parkinson's disease patient with chronic periodontitis was treated with full-mouth rehabilitation using conventional fixed prostheses and implant fixed partial denture, which attained satisfactory outcomes functionally and esthetically. Short term periodic follow-ups will be needed with consideration for the characteristics of Parkinson's disease such as decreased manual dexterity.

• Archives of Plastic Surgery
• /
• v.47 no.1
• /
• pp.33-41
• /
• 2020

Background Closed-suction drains are widely used in expander-based breast reconstruction. These drains are typically removed using a volume-based criterion. The drainage volume affects the hospital stay length and the recovery time. However, few studies have analyzed the factors that influence drainage volume after expander-based breast reconstruction. Methods We retrospectively analyzed data regarding daily drainage from patients who underwent expander-based breast reconstruction between April 2014 and January 2018 (159 patients, 176 expanders). Patient and operative factors were analyzed regarding their influence on total drainage volume and drain placement duration using univariate and multivariate analyses and analysis of variance. Results The mean total drainage volume was 1,210.77±611.44 mL. Univariate analysis showed correlations between total drainage volume and age (B=19.825, P<0.001), body weight (B=17.758, P<0.001), body mass index (B=51.817, P<0.001), and specimen weight (B=1.590, P<0.001). Diabetes history (P<0.001), expander type (P<0.001), and the surgical instrument used (P<0.001) also strongly influenced total drainage. The acellular dermal matrix type used did not affect total drainage (P=0.626). In the multivariate analysis, age (B=11.907, P=0.004), specimen weight (B=0.927, P<0.001), and expander type (B=593.728, P<0.001) were significant predictors of total drainage. Conclusions Our findings suggest that the total drainage and the duration of drain placement needed after expander-based breast reconstruction can be predicted using preoperative and intraoperative data. Patient age, specimen weight, and expander type are important predictors of drainage volume. Older patients, heavier specimens, and use of the Mentor rather than the Allergan expander corresponded to a greater total drainage volume and a longer duration of drain placement.

• Biomedical Engineering Letters
• /
• v.8 no.4
• /
• pp.337-344
• /
• 2018

Additive manufacturing (AM) is an alternative metal fabrication technology. The outstanding advantage of AM (3D-printing, direct manufacturing), is the ability to form shapes that cannot be formed with any other traditional technology. 3D-printing began as a new method of prototyping in plastics. Nowadays, AM in metals allows to realize not only net-shape geometry, but also high fatigue strength and corrosion resistant parts. This success of AM in metals enables new applications of the technology in important fields, such as production of medical implants. The 3D-printing of medical implants is an extremely rapidly developing application. The success of this development lies in the fact that patient-specific implants can promote patient recovery, as often it is the only alternative to amputation. The production of AM implants provides a relatively fast and effective solution for complex surgical cases. However, there are still numerous challenging open issues in medical 3D-printing. The goal of the current research review is to explain the whole technological and design chain of bio-medical bone implant production from the computed tomography that is performed by the surgeon, to conversion to a computer aided drawing file, to production of implants, including the necessary post-processing procedures and certification. The current work presents examples that were produced by joint work of Polygon Medical Engineering, Russia and by TechMed, the AM Center of Israel Institute of Metals. Polygon provided 3D-planning and 3D-modelling specifically for the implants production. TechMed were in charge of the optimization of models and they manufactured the implants by Electron-Beam Melting ($EBM^{(R)}$), using an Arcam $EBM^{(R)}$ A2X machine.