• 한국분무공학회지
• /
• 제12권1호
• /
• pp.18-29
• /
• 2007

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle - installed downstream of the high pressure turbine extraction steam line - inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes the comparisons between the numerical analysis results using the FLUENT code and the down scale experimental data in an effort to determine root causes of the shell wall thinning of the high pressure feedwater heaters. The numerical analysis and experimental data were also confirmed by actual wall thickness measured by an ultrasonic test.

• 대한기계학회논문집B
• /
• 제31권1호
• /
• pp.1-7
• /
• 2007

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle - installed downstream of the high pressure turbine extraction steam line - inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes the comparisons between the numerical analysis results using the FLUENT code and the down scale experimental data in an effort to determine root causes of the shell wall thinning of the high pressure feedwater heaters. The numerical analysis and experimental data were also confirmed by actual wall thickness measured by an ultrasonic test.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.24-30
• /
• 2004

Feedwater flowing tube side of number 5 high pressure feedwatrr heaters was heated by extracting steam from high pressure turbine and draining water from moisture separators and number 6 high pressure feedwater heaters and supplied into steam generators. Because the extracting steam from the high pressure turbine is two phase fluid of high temperature, high pressure, and high speed and flows to inverse direction after impinging to impingement baffle. the shell wall of the number 5 high pressure feedwater heater may be affected by flow accelerated corrosion. On May 14, 1999, Point Beach Nuclear Plant (PBNP) with operating at full power experienced a steam leak from rupture of shell side of number 4B feedwater heater. Also, d domestic nuclear power plant experienced a severe wall thinning of shell side of number 5A and 5B feedwater heaters. This paper describes the fluid mixing analysis study using PHOENICS code in order to get at the root of the shell wall thinning of the feedwater heaters. The sections included in the fluid mixing analysis model are around the number 5h feedwater heater shell including the extracting pipeline. To identify the relation between the local velocities and wall thinning. the local velocities according to the analysis results were compared with the distribution of the shell wall thickness by ultrasonic test.

• 한국습지학회지
• /
• 제19권4호
• /
• pp.484-490
• /
• 2017

복단면 형태를 이루는 직선하도 내 사행하는 저수로의 형태에 따른 흐름 특성을 파악하기 위해, 국내 대표적인 하도 형태를 상정해 실내 수리모형을 실시해서 3차원 수치모의의 유효성을 확인하고, 이를 바탕으로 다른 유형의 하도 형태에 대해서도 수치모의로 검토를 실시하였다. 본 연구결과, 수리모형 실험에서 관측한 수심별 유속값을 이용하여 수치모형의 검정을 수행한 결과, 수치모의 결과와 충분히 일치하는 것으로 확인하였다. 이를 토대로, 추가적인 저수로 형태 변화에 따른 유동장에 대해 분석한 바에 따르면, 선행 연구들에서 검토된 이차류 현상이 발생하였음을 확인한 한편, 고수부지 내 유수단면적 확대에 따라 최고유속분포 지점이 이동하는 현상을 확인할 수 있었다. 궁극적으로 저수로 폭 변화가 흐름에 영향을 끼쳐 궁극적으로 하천설계에 중요한 요소인 수충부의 위치와 그 영향 정도를 파악하는 것이 필요하다고 판단된다.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.67-75
• /
• 2002

A study to investigate the influence of combustion chamber shape, especially piston top face configuration, on the combustion stability is presented with CFD analysis and single cylinder GDI engine test. Initial configuration of the piston bowl was designed with CFD analysis and further parametric studies of the design factors on the piston top face were carried out through the single cylinder GDI engine test. It was found that both the geometry of piston top face and the compression ratio have great influences on the combustion stability. Of interest is that the design factors of the GDI piston to prevent mixture diffusion out of the piston bowl have important roles for the stable combustion at the stratified mixture condition. Also the relationship between spray impingement and flow pattern in a GDI piston bowl should be considered to design an optimal bowl configuration for stable stratified combustion.

• Corrosion Science and Technology
• /
• 제12권2호
• /
• pp.85-92
• /
• 2013

This work is concerned with an evaluation of dynamic boric acid corrosion (BAC) of low alloy steel for reactor pressure vessel of a pressurized water reactor (PWR). Mockup test method was newly established to investigate dynamic BAC of the low alloy steel under various conditions simulating a primary water leakage incident. The average corrosion rate was measured from the weight loss of the low alloy steel specimen, and the maximum corrosion rate was obtained by the surface profilometry after the mockup test. The corrosion rates increased with the rise of the leakage rate of the primary water containing boric acid, and the presence of oxygen dissolved in the primary water also accelerated the corrosion. From the specimen surface analysis, it was found that typical flow-accelerated corrosion and jet-impingement occurred under two-phase fluid of water droplet and steam environment. The maximum corrosion rate was determined as 5.97 mm/year at the leakage rate of 20 cc/min of the primary water with a saturated content of oxygen within the range of experimental condition of this work.

• 대한관절경학회지
• /
• 제1권1호
• /
• pp.123-127
• /
• 1997

Arthroscopic anterior cruciate ligament reconstructions using bone-patella tendon-bone have been considered the best method by which others are compared. The notchyplasty is one of the important steps of this procedure and it is emphasized recently to prevent retear of the reconstructed ACL caused by impingement. However, until now, there is controversy about adequate amount of notchyplasty. Also, it is hard to examine the adequacy of notchyplasty even in the arthroscopic field, The purpose of this paper is to describe the surgical technique of notchyplasty, using the flexible reamer and preliminary result of its operation. In this study the results of ACL reconstruction with notchyplasty which is made by us were analized from January. 1994 to December, 1995. The results were as follows: 1. The notchyplasty with flexible reamer is the method that can be obtained adequate amount of removal, perfectly smooth notchyplasty. 2. The range of motion of the affected knee joint was normal ROM after post operation 6 month. 3. In the last follow up, 2 cases were positive in anterior drawer test 4 cases were positive in Lachmann's test and 1 knee was positive in Pivot shift test 4. Average Lysholm knee scoring scale was 70 points at preoperative and 92 points at the last follow up.

• 대한정형외과학회지
• /
• 제56권2호
• /
• pp.125-133
• /
• 2021

목적: 고관절 전치환술 후 발생한 장요건 충돌 환자에서 관절경적 장요건 절단술이 유용한 방법인지 알아보기 위하여 임상 결과에 대하여 조사하였다. 대상 및 방법: 2013년 9월부터 2019년 12월까지 고관절 전치환술 후 지속되는 서혜부 통증 및 굴곡 시 통증을 호소하는 18명(19예 고관절)의 환자를 대상으로 하였다. 평균 연령 60세(범위, 50-69세)의 환자들에서 고관절 전치환술 후 증상발현까지는 평균 4개월(범위, 1-9개월)이 소요되었으며, 18명 환자 중 13명에는 직접전방접근법, 5명에는 측방접근법을 통한 고관절 전치환술이 시행되었다. 병력청취, 신체 검사, 혈액검사, 단순 방사선촬영과 컴퓨터 단층촬영을 이용한 영상 검사, 그리고 국소주사치료를 통하여 장요건 충돌을 진단하였다. 이들 모든 환자는 관절경적 처치를 시행받았고, 역동적 신체 검사를 통하여 술장 내에서 충돌이 이루어짐을 확인하였으며, 근육부위까지 도달하도록 관찰된 건 부위 모두에 대하여 건절단술을 시행하였다. 수술 전, 후, 추시기간의 증상 및 통증 정도에 대하여 조사하여 비교하였다. 결과: Western Ontario and McMaster Universities Osteoarthritis Index 점수는 술 전 평균 58.4점(범위, 40-88점)에서 술 후 평균 35.0점(범위, 15-76점)으로 감소하였다. 시각통증등급도 마찬가지로 술 전 평균 4.0 (범위, 2-6)에서 술 후 평균 1.4 (범위, 0-4)로 감소하였다. 16명(88.9%)에서 통증 경감 및 하지거상 시 통증의 호전을 보였으며, 2명에서는 통증 잔존과 술 후 근력 약화를 보였다. 이후 추시기간에서 근력 약화는 호전되었다. 1명의 경우 소전자부에서 장요건 건절단술을 시행하였으나 증상이 지속되었으며, 관절부에서 한 차례 더 건절단술 시행 후 임상증상의 호전을 보였다. 결론: 고관절 전치환술 후 발생한 장요건 충돌에서 고관절 관절경을 이용한 장요건 건절단술은 양호한 임상 결과를 보였다.

• 대한정형외과스포츠의학회지
• /
• 제9권2호
• /
• pp.104-108
• /
• 2010

목적: 회전근 개 질환 치료 후 복귀 판정에 있어 기능적 평가로서 Korean Shoulder Scoring System (KSS)과 등속성 근력 평가 간의 상호 관계를 알아보고자 하였다. 대상 및 방법: 본 연구는 충돌 증후군 59명과 회전근 개 파열 환자 36명을 대상으로 하였다. KSS와 등속성 근력을 측정하고 KSS의 총점 및 기능적 평가 항목을 등속성 근력 결핍과 비교하여 상관 관계를 알아보았다. 결과: 등속성 근력 결핍은 KSS의 총점이나 근 지구력 검사 항목 점수가 클수록 근력 감소가 적게 나타나면서 상관계수 값(r)이 0.346이하로 약하게 보였다. KSS 도수 근력 검사 항목은 등속성 근력 감소와 상관 관계가 유의하지 않았다(p>0.05). 결론: 등속성 근력 결핍은 KSS 총점과 KSS 지구력 항목과는 약한 관련성을 보였다. 치료 후 정상 활동 복귀를 위해서 등속성 근력 검사를 통해서 판단함이 유용하다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.1931-1936
• /
• 2007

The application of high velocity air jets to heat transfer surface has tremendous engineering potential in various industries. The impinging jets are therefore widely used for their enhanced transport characteristics, especially for drying of continuous materials such as sheet, film, carpets, forming materials and pallets. This paper presents the drying characteristics of plate type material and performs the test with the change of operating conditions in conveyer band dryer using the impinging jet nozzles. The factors influencing drying rate were confirmed, also the design data of band dryer using the impinging jet was obtained.