• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.994-1001
• /
• 2012

승차감이나 안전에 관련된 부분 중 하나인 자동차 시트는 차량 주행시 전달되는 충격이나 진동을 적절하게 흡수하여 승객에게 안락성을 제공한다. 또한 이러한 여건을 만족시키면서 승객의 안전을 보장하는 충분한 강성과 강도를 가져야 한다. 자동차 시트는 2가지의 모델로 설계를 하고 구조 해석을 하였다. 그 결과, 시트 백 프레임의 모델(b)가 (a)보다 적은 변형량과 피로 수명을 보였고. 모델의 중앙에 해당되는 허리부분에서 가장 많은 변형량과 파손 가능성을 보였다. 고유진동수를 적용한 진동해석에서, 모델(a)의 경우는 모델의 바깥쪽에서 안쪽으로 변형이 되었고, 모델(b)의 경우는 모델의 안쪽에서 바깥쪽으로 변형이 되었다. 전반적으로 모든 면에서 모델(b)가 (a)보다 구조적으로 안전하다고 사료된다.

• 한국소음진동공학회논문집
• /
• 제18권6호
• /
• pp.624-631
• /
• 2008

This study evaluates the impact of aircraft noise on people's health using the Todai health index(THI). A questionnaire survey was conducted in the vicinity of Gimpo International Airport in Seoul, South Korea, from August 8th to September 9th, 2005. The survey area was divided into three groups based on different aircraft noise levels : area (1) for $80{\sim}85$ WECPNL, area (2) for $75{\sim}80$ WECPNL and area (3) for less than 75 WECPNL. In each area, approximately 200 respondents were sampled. Twelve scale scores of THI are converted to dichotomous variables based on scale scores of 90 percentile value or 10 percentile value in the control group. Logistic regression analysis taking twelve scores converted as the dependent variables and WECPNL(area), age, gender as the independent variables is conducted. Significant dose-response relationships are found in the scale of MOUT, DEPR, NERV, LIFE. Factor analysis was carried out and 2 factors are extracted. Those two factors might be called the "somatic factor" and the "mental factor". The dose-response relationship between two factors and noise seems to be unclear. Unexpectedly the odds ratio of the menatl factor in area (2), where the noise exposure level is lower than that of the area (1), is the highest and the annoyance in this area is also higher than area (1).

• Structural Engineering and Mechanics
• /
• 제54권2호
• /
• pp.257-289
• /
• 2015

Shear connectors are generally used to link the slab and girders together in slab-on-girder bridge structures. Damage of shear connectors in such structures will result in shear slippage between the slab and girders, which significantly reduces the load-carrying capacity of the bridge. Because shear connectors are buried inside the structure, routine visual inspection is not able to detect conditions of shear connectors. A few methods have been proposed in the literature to detect the condition of shear connectors based on vibration measurements. This paper proposes a different dynamic condition assessment approach to identify the damage of shear connectors in slab-on-girder bridge structures based on power spectral density transmissibility (PSDT). PSDT formulates the relationship between the auto-spectral densities of two responses in the frequency domain. It can be used to identify shear connector conditions with or without reference data of the undamaged structure (or the baseline). Measured impact force and acceleration responses from hammer tests are analyzed to obtain the frequency response functions at sensor locations by experimental modal analysis. PSDT from the slab response to the girder response is derived with the obtained frequency response functions. PSDT vectors in the undamaged and damaged states can be compared to identify the damage of shear connectors. When the baseline is not available, as in most practical cases, PSDT vectors from the measured response at a reference sensor to those of the slab and girder in the damaged state can be used to detect the damage of shear connectors. Numerical and experimental studies on a concrete slab supported by two steel girders are conducted to investigate the accuracy and efficiency of the proposed approach. Identification results demonstrate that damages of shear connectors are identified accurately and efficiently with and without the baseline. The proposed method is also used to evaluate the conditions of shear connectors in a real composite bridge with in-field testing data.

• 한국포장학회지
• /
• 제26권2호
• /
• pp.113-118
• /
• 2020

Due to the rapid increase in cyber shopping mall of agricultural products, the parcel delivery service industry also increased, making it necessary to design an optimum packaging for agricultural products. And Due to the recent increase in strawberry consumption, there is also a need for a packaging system for parcel delivery service. In order to establish the criteria for optimum cushioning packaging design of strawberries, the bioyield strength of strawberries by storage time was measured through the ASABE test standards, and the peak acceleration in the resonance frequency and resonance frequency bands of strawberries was measured through the vibration test regulated in the ASTM test specifications. Tray cup pad and corrugated fiberboard box of delivery strawberries were designed using FEM theoretical analysis of contact stress and resonant frequency. In addition, an optimum packaging system was developed with a cushioning and vibration design considering the impact characteristics when distributing agricultural products. Through the performance evaluation and on-site evaluation of the optimum packaging system of strawberries for parcel delivery service, the random PSD test results of the delivery showed a 74% reduction in the acceleration level, and the actual distribution test of the delivery showed that the damage rate of strawberries was not more than 6.7%, indicating that it was possible to use the optimum packaging of strawberries for delivery.

• 한국소음진동공학회논문집
• /
• 제26권1호
• /
• pp.69-74
• /
• 2016

A technique for improving estimation accuracy is introduced in order to locate the impact position of artillery shell during the weapon scoring test. Study on localization of impacts using acoustic measurement has been conducted and the usability of sensor array is verified with experiments. When the blast occurs above the ground in the firing range, the acoustic sensor above the ground can measure the directly propagated sound with the ground-reflected one. In this study, a method for reducing estimation error by using the reflection signal measurements based on the time difference of arrival method. Considering the reflection sound works as same as placing a virtual sensor symmetrically through the ground. This idea enables a virtual three-dimensional array configuration with a two-dimensional plane array above the ground as such. The time difference between the direct and the reflected propagations can be estimated using cepstrum analysis. Performance test has been made in the simulation experiment in the football size area.

• Computers and Concrete
• /
• 제20권5호
• /
• pp.545-553
• /
• 2017

A pounding tuned mass damper (PTMD) can be considered as a passive device, which combines the merits of a traditional tuned mass damper (TMD) and a collision damper. A recent analytical study by the authors demonstrated that the PTMD base on the energy dissipation during impact is able to achieve better control effectiveness over the traditional TMD. In this paper, a PTMD prototype is manufactured and applied for seismic response reduction to examine its efficacy. A series of shaking table tests is conducted in a three-story building frame model under single-dimensional and two-dimensional broadband earthquake excitations with different excitation intensities. The ability of the PTMD to reduce the structural responses is experimentally investigated. The results show that the traditional TMD is sensitive to input excitations, while the PTMD mostly has improved control performance over the TMD to remarkably reduce both the peak and root-mean-square (RMS) structural responses under single-dimensional earthquake excitation. Unlike the TMD, the PTMD is found to have the merit of maintaining a stable performance when subjected to different earthquake loadings. In addition, it is also indicated that the performance of the PTMD can be enhanced by adjusting the initial gap value, and the control effectiveness improves with the increasing excitation intensity. Under two-dimensional earthquake inputs, the PTMD controls remain outperform the TMD controls; however, the oscillation of the added mass is observed during the test, which may induce torsional vibration modes of the structure, and hence, result in poor control performance especially after a strong earthquake period.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권1호
• /
• pp.81-90
• /
• 2008

본 연구에서는 유한 요소법과 고도화된 손상 탐지 기법을 결합하여 구조적 손상을 규명하는 방법을 다룬다. 본 연구의 특징은 충격하중을 받는 구조물의 동적 거동 특성을 분석하여 이를 임의의 손상 형태를 갖는 판에 적용한다는 것이다. 이러한 방법은 손상된 부위의 강성 분포를 추정할 뿐만 아니라 손상의 정도도 파악할 수 있는 장점을 갖으며 분할 요소수의 제한을 두지 않는다. 제안된 방법을 검증하기 위하여 본 알고리즘은 임의의 손상을 갖는 박판에 대하여 적용하기 한다. 수치해석 결과로부터 제안된 알고리즘은 수치적 효율성과 함께 임의의 손상 분포를 규명할 수 있음을 보여준다.

• 터널과지하공간
• /
• 제19권5호
• /
• pp.397-406
• /
• 2009

최근에는 구조적 노후화 및 기능적 요건을 만족하지 못하여 해체되는 산업구조물의 수요가 증가하고 있으며, 해체과정에서 발생되는 시간적, 공간적 환경위해요소를 최소화하기 위해 발파해체공법의 적용이 증가하고 있다. 본 시공 사례는 구조적 노후화와 기능적 요건을 충족하지 못하는 대단면 철근콘크리트 특수구조물인 Crusher & Screen 구조물의 발파해체를 기술하였다. 대단면 철근콘크리트 부재에 대한 다양한 사전취약화 및 발파패턴을 적용하였으며 발파진동 및 충격진동을 감소시키기 위해 동일한 기둥 내에서의 발파시차 및 발파구역간의 발파시차를 설정하였다. 대단면 철근콘크리트 특수구조물의 해체에 발파해체공법을 적용함으로써 주변 시설물에 대한 피해없이 안전하고 효율적으로 해체가 완료되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.763-764
• /
• 2013

A three-dimensional image capturing device and its signal processing algorithm and apparatus are presented. Three dimensional information is one of emerging differentiators that provides consumers with more realistic and immersive experiences in user interface, game, 3D-virtual reality, and 3D display. It has the depth information of a scene together with conventional color image so that full-information of real life that human eyes experience can be captured, recorded and reproduced. 20 Mega-Hertz-switching high speed image shutter device for 3D image capturing and its application to system prototype are presented[1,2]. For 3D image capturing, the system utilizes Time-of-Flight (TOF) principle by means of 20MHz high-speed micro-optical image modulator, so called 'optical resonator'. The high speed image modulation is obtained using the electro-optic operation of the multi-layer stacked structure having diffractive mirrors and optical resonance cavity which maximizes the magnitude of optical modulation[3,4]. The optical resonator is specially designed and fabricated realizing low resistance-capacitance cell structures having small RC-time constant. The optical shutter is positioned in front of a standard high resolution CMOS image sensor and modulates the IR image reflected from the object to capture a depth image (Figure 1). Suggested novel optical resonator enables capturing of a full HD depth image with depth accuracy of mm-scale, which is the largest depth image resolution among the-state-of-the-arts, which have been limited up to VGA. The 3D camera prototype realizes color/depth concurrent sensing optical architecture to capture 14Mp color and full HD depth images, simultaneously (Figure 2,3). The resulting high definition color/depth image and its capturing device have crucial impact on 3D business eco-system in IT industry especially as 3D image sensing means in the fields of 3D camera, gesture recognition, user interface, and 3D display. This paper presents MEMS-based optical resonator design, fabrication, 3D camera system prototype and signal processing algorithms.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.206-213
• /
• 2013

본 논문에서는 적분변환법을 이용하여 면외전단 충격하중이 작용하는 두 개의 서로 다른 압전재료층 사이의 기능경사압전재료 접합층 내부 균열에 대한 과도응답 해석 을 수행한다. 기능경사압전재료의 물성치는 두께 방향을 따라 연속적으로 변하는 것으로 가정한다. 라플라스 변환과 푸리에 변환을 이용하여 문제를 복합적분방정식으로 구성하고, 수치해석을 위해 복합적 분방정식을 제 2 종 프레드홀름 적분방정식으로 표현한다. 전기적 하중, 재료물성 치의 변화율, 각 접합층의 두께가 균열의 과도응답에 미치는 영향을 보기 위해 동에너지 해방률에 대한 수치해석 결과를 제시한다.