• Advances in Traditional Medicine
• /
• 제3권2호
• /
• pp.106-110
• /
• 2003

Respiratory syncytial virus (RSV) has long been considered an important cause of severe lower respiratory tract infection in infants and young children throughout the world. Unfortunately, no effective treatment of RSV exists. Therefore, New agents are needed to reduce the impact of RSV. We have studied the anti-viral effect of traditional Chinese midicinal herbs for over ten years and find Herba Patrinea (a Chinese medicinal herb) has the anti-RSV effect in vitro. In this study, the Herba Patrinea was extracted with hot water, condensed and sterilized. The cytotoxicity of the aqueous extract was tested by adding the diluted extract directly to HeLa cells and its effect on anti-RSV was estimated by the CPEI assay. As a result, the median cytotoxic concentration $(CC_{50})$ of Herba Patrinea was 32 mg/ ml by morphological observation, the median effective concentration (50% effective concentration, $EC_{50}$) of the Herba Patrinea against replication of the Long strain of RSV in HeLa cells were 1.25 mg/ml. The selectivity index $(SI=CC_{50}/EC{50})$ is 25.6. Moreover, Herba Patrinea gave a dose-dependent response in inhibiting RSV. In time of addition experiment, Herba Patrinea inhibited replication of RSV in HeLa cells when it was added at 0h, 2h, and 4h after virus infection. In summary, the results of this study suggest Herba Patrinea may be a novel anti-RSV drug and it is worthy of further studying.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.337-343
• /
• 2020

Oxide dispersed strengthened (ODS) steel is an important candidate for Gen-IV reactors. Oxide embedded in Fe can help to trap irradiation defects and enhances the strength of steel. It was observed in this study that the size of oxide has a profound impact on the depinning mechanism. For smaller sizes, the oxide acts as a void; thus, letting the dislocation bypass without any shear. On the other hand, oxides larger than 2 nm generate new dislocation segments around themselves. The depinning is similar to that of Orowan mechanism and the strengthening effect is likely to be greater for larger oxides. It was found that higher shear deformation rates produce more fine-tuned stress-strain curve. Both molecular dynamics (MD) simulations and BKS (Bacon-Knocks-Scattergood) model display similar characteristics whereby establishing an inverse relation between the depinning stress and the obstacle distance. It was found that (110)_oxide || (111)_Fe (oriented oxide) also had similar characteristics as that of (100)_oxide || (111)_Fe but resulted in an increased depinning stress thereby providing greater resistance to dislocation bypass. Our simulation results concluded that critical depinning stress depends significantly on the size and orientation of the oxide.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권4호
• /
• pp.287-297
• /
• 2020

The research aims to investigate the impact levels of determinants on the loyalty of accountants to FDI firms underlying investment management in Thanglong Industrial Park in Hanoi, Vietnam. We conducted a questionnaire consisting of 31 observation variables with a 5-point Likert scale. Independent variables were measured from 1 "without effect" to 5 "strongly". The method of data collection was done through the survey and subjects are accountants in FDI firms doing business in Thanglong Industrial Park in Hanoi. After checking the information on the votes, there are 120 questionnaires with full information for data entry and analysis, This study employs Cronbach's Alpha test, and regression model. The results show that seven determinants including Working environment, The characteristics of working; Training, promotion prospects and development; Income, Personal characteristic, Collective work together and The method of leading had positive relationships with the loyalty of accountants. Based on the findings, some recommendations are given related to such determinants to improve the loyalty of accountants of FDI firms in general and FDI firms in Thanglong Industrial Park in Hanoi in particular. With which, those firms can enhance performance, reduce financial strain, saving on investment in the recruiting process of new staff, increase profitability to ensure investment management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권10호
• /
• pp.97-101
• /
• 2017

X-ray diffractometers are used to characterize material properties, such as the phase, texture, lattice constant and residual stress, based on the diffracted beams obtained from specimens. Quantitative analyses using X-rays are typically conducted by measuring the peak positions of the diffracted beams. However, the long-term use of the diffractomer, like any other machine, results in errors associated with the mechanical parts, which can deteriorate the accuracy of the quantitative analyses. In this study, the process of correcting systematic errors in the $2{\theta}$ range of $30{\sim}90^{\circ}$ is discussed, for which strain-free Si powders from NIST were used as the standard specimens. For the evaluation of the impact of such error correction, we conducted a quantitative analysis of the true lattice constant for tungsten thin films.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 한국항해항만학회 2019년도 추계학술대회
• /
• pp.193-194
• /
• 2019

Due to structural problems in the transportation market, such as fraudulent competition and multi-level transportation transactions, tariff are not properly refIected to the final trucker even if freight tariff are increased due to diesel price hikes and transportation cost increases. By Launched "standard tariff system" in 2017 based on the trucks, government would tried to guarantee the minimum tariff such that prevents overloading, speeding, and strain for trucker. However, It is necessary to analyze in advance the issue of the system and its impact on container freight. Thus, this study analyzes the issues and countermeasures related to the tariff system that is formed when the "Truck Safety Rates" is introduced, and also analyzes the influence factors of the expenditure cost on the container freight which is applied to the "Truck Safety Rates".

• The Plant Pathology Journal
• /
• 제34권4호
• /
• pp.286-296
• /
• 2018

Maintenance of a beneficial microbial community, especially in the rhizosphere, is indispensable for plant growth and agricultural sustainability. In this sense, plant growth-promoting rhizobacteria (PGPR) have been extensively studied for their role in plant growth promotion and disease resistance. However, the impact of introducing PGPR strains into rhizosphere microbial communities is still underexplored. We previously found that the Proteus vulgaris JBLS202 strain (JBLS202) promoted growth of Kimchi cabbage and altered the relative abundance of total bacteria and Pseudomonas spp. in the treated rhizosphere. To extend these findings, we used pyrosequencing to analyze the changes in bacterial communities in the rhizosphere of Kimchi cabbage after introduction of JBLS202. The alterations were also evaluated by taxon-specific realtime PCR (qPCR). The pyrosequencing data revealed an increase in total bacteria abundance, including specific groups such as Proteobacteria, Acidobacteria, and Actinobacteria, in the treated rhizosphere. Time-course qPCR analysis confirmed the increase in the abundance of Acidobacteria, Actinobacteria, Alphaproteobacteria, and Betaproteobacteria. Furthermore, genes involved in nitrogen cycling were upregulated by JBLS202 treatment indicating changes in ecological function of the rhizosphere soil. Overall, these results indicate that introduction of JBLS202 alters both the composition and function of the rhizosphere bacterial community, which can have direct and indirect effects on plant growth. Therefore, we propose that long-term changes in bacterial composition and community-level function need to be considered for practical use of PGPRs.

• Proceedings of the KWS Conference
• /
• 대한용접접합학회 1996년도 특별강연 및 춘계학술발표 개요집
• /
• pp.186-189
• /
• 1996

A study was made to examine the characteristics of base metal and stress relief cracking(SRC) of heat affected zone(HAZ) for HY-100 and Cu-bearing HSLA-100 steels. The Gleeble thermal/mechanical simulator was used to simulate the SRC/HAZ. The details of mechanical properties of base plate and SRC tested specimens were studied. The specimens were aged at $650^{\circ}C$ for HSLA-100 steel and at 66$0^{\circ}C$ for HY-100 steel and thermal cycled from 135$0^{\circ}C$ In $25^{\circ}C$ with a cooling time of $\Delta$ $t_{800^{\circ}50}$ $0^{\circ}C$/=21sec. corresponds to the heat input of 30kJ/cm. The thermal cycled specimens were stressed to a predetermined level of 248~600MPa and then reheated to the stress relief temperatures of 570~62$0^{\circ}C$. The time to failure( $t_{f}$) at a given stress level was used as a measure of SRC susceptibility. The strength, elongation and impact toughness of base plate were greater in HSLA-100 steel than in HY-100 steel. The time to failure was decreased with increasing temperature and/or stress. HSLA-100 steel was more susceptible to stress relief cracking than HY-100 steel under same conditions. It is thought to be resulted from the precipitation of $\varepsilon$-Cu phase by dynamic self diffusion of solute atoms. Therefore, greater strain concentration at grain boundary of HSLA-100 steel results in the increased SRC susceptibility.y.

• The Plant Pathology Journal
• /
• 제32권2호
• /
• pp.136-144
• /
• 2016

Pseudomonas fluorescens pc78 is an effective biocontrol agent for soil-borne fungal diseases. We previously constructed a P43-gfp tagged biocontrol bacteria P. fluorescens pc78-48 to investigate bacterial traits in natural ecosystem and the environmental risk of genetically modified biocontrol bacteria in tomato rhizosphere. Fluctuation of culturable bacteria profile, microbial community structure, and potential horizontal gene transfer was investigated over time after the bacteria treatment to the tomato rhizosphere. Tagged gene transfer to other organisms such as tomato plants and bacteria cultured on various media was examined by polymerase chain reaction, using gene specific primers. Transfer of chromosomally integrated P43-gfp from pc78 to other organisms was not apparent. Population and colony types of culturable bacteria were not significantly affected by the introduction of P. fluorescens pc78 or pc78-48 into tomato rhizosphere. Additionally, terminal restriction fragment length polymorphism profiles were investigated to estimate the influence on the microbial community structure in tomato rhizosphere between non-treated and pc78-48-treated samples. Interestingly, rhizosphere soil treated with strain pc78-48 exhibited a significantly different bacterial community structure compared to that of non-treated rhizosphere soil. Our results suggest that biocontrol bacteria treatment influences microbial community in tomato rhizosphere, while the chromosomally modified biocontrol bacteria may not pose any specific environmental risk in terms of gene transfer.

• Fire Science and Engineering
• /
• 제30권4호
• /
• pp.46-58
• /
• 2016

In this study, the stress applied to screw section, strain, displacement, von Mises stress, and the compression stress applied to the rubber packing for watertightness are estimated with computer simulation when the tightening torque of valve socket is in the range of $10{\sim}130N{\cdot}m$ in order to analyze the influence of valve socket screw section in accordance with the excessive tightening which is supposed to be the cause of water leakage from the synthetic resin piping for fire fighting application of sprinkler equipment, and for the sake of verifying this, adequate value of tightening torque and the value of the compression stress of rubber packing are investigated by examining the number of connected thread for each tightening torque, the deformation state of valve socket and rubber packing and conducting the water hammering test. The result of this test is expected to be utilized as the data required for revising the standard or technical criteria to prevent the water leakage of the synthetic resin piping for fire fighting application.

• Safety and Health at Work
• /
• 제9권2호
• /
• pp.149-158
• /
• 2018

Background: Work comfort studies have been extensively conducted, especially in the underground and meteorological fields resulting in an avalanche of recommendations for their evaluation. Nevertheless, no known or universally accepted model for comprehensively assessing the thermal work condition of the underground mine environment is currently available. Current literature presents several methods and techniques, but none of these can expansively assess the underground mine environment since most methods consider only one or a few defined factors and neglect others. Some are specifically formulated for the built and meteorological climates, thus making them unsuitable to accurately assess the climatic conditions in underground development and production workings. Methods: This paper presents a series of sensitivity analyses to assess the impact of environmental parameters and metabolic rate on the thermal comfort for underground mining applications. An approach was developed in the form of a "comfort model" which applied comfort parameters to extensively assess the climatic conditions in the deep, hot, and humid underground mines. Results: Simulation analysis predicted comfort limits in the form of required sweat rate and maximum skin wettedness. Tolerable worker exposure times to minimize thermal strain due to dehydration are predicted. Conclusion: The analysis determined the optimal air velocity for thermal comfort to be 1.5 m/s. The results also identified humidity to contribute more to deviations from thermal comfort than other comfort parameters. It is expected that this new approach will significantly help in managing heat stress issues in underground mines and thus improve productivity, safety, and health.