• International Journal of Advanced Culture Technology
• /
• 제8권2호
• /
• pp.1-5
• /
• 2020

As the world gradually advances to an aging society, the quality of human life is valued. Among them, 'quality of sleep' is very closely related to quality of life. Recently, Korea expanded health insurance coverage for "sleep disorders". Particularly, as the number of sleep multiple tests and prescriptions for sleep aids has increased rapidly, much attention has been focused on the related medical service environment. Therefore, this study looked at an in-depth interview of 11 hospitals to see what treatment delivery system is being established when the government applies health insurance for 'sleep disorders'. In conclusion, the organizations with the most average number of sleep polyp tests per day were found to have more sleep polyp labs (hardware) and more full-time specialists. Also, the polysomnography lab (hardware) and the specialist's full-time status (software) did not necessarily result in a "positive pressure regulator prescription" that can solve "sleep apnea" caused by "sleep ailments". Rather, it was found that the number of days of sleep multiple laboratories (hardware), the number of full-time specialists (software) or the specialty majors (software) had a greater impact. In particular, the higher the specialist's full-time personnel (software) index (=6.000), the higher the sleep-inducing agent prescription rate(=1.000), and the lower the specialist's full-time personnel (software) index (=1.000), the higher the sleep-inducer's prescription rate(= 0.010) Was low. In addition, even if the professional full-time personnel(software) index was the same (=1.000), the hospital type was lower as it was closer to the public hospital(=0.067) and higher at the specialized hospital (= 0.933). In the case of university hospitals, when the full-time specialists (software) are in the same condition (= 1.000), the frequency of use of the sleep laboratory (=1.000) and the sleep test rate (= 1.000) were all the same.

• 경영과정보연구
• /
• 제4권
• /
• pp.349-374
• /
• 2000

With rapid advances on Interactive technology, and the growing popularity of the Internet, Internet shopping receives considerable attention in both the popular-press and academic journals. The Internet has enormous commercial possibilities. But it is a new and dynamic medium that poses special challenges for marketers. The revolutionary nature of the Internet mandates that established wisdom on consumer marketing along with marketing-mix strategies has to be reexamined and perhaps radically revised. In order to assist marketers in this endeavor it is critical to understand consumers' buying behaviors of Internet shopping. But research in this area still very much its infancy. This study examined previous researches of Internet shopping and developed conceptual framework of Internet shopping modes. Additionally, this study examined empirical investigation of Internet shopping. Preliminary results suggests that there are significant differences in individuals' perceptions of Internet shopping and traditional shopping modes. Various factors influences on consumers' buying behavior on Internet shopping. There are Individuals' factors(personality, lifestyle, prior experience, perceived risk etc), shopping mall factors(trust, vividness, security, promotion, etc), product characteristics(product category, brand, etc), situational factors(time pressure, locational constraints etc), social/cultural factors(Norms, importance of other peoples etc). Additionally, We conducted empirical study of the impact of the Internet on consumer shopping behavior. We gathered consumers' reactions via an open-ended survey using a sample of 90 shoppers. We related the reactions to the factors of consumers' satisfaction or dissatisfaction of the Internet shopping. Consequently, there are many questions regarding factors that might influence Internet shopping. From theoretical and practical perspectives, studies that examine these factors would seem to offer much to the discipline. This paper has attempted th provide insights and direction of future empirical examination of Internet shopping.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.864-870
• /
• 2017

다단연소사이클 엔진의 추진제는 예연소기에서 일부 연소되고, 연소된 고온의 가스는 터빈을 구동하고 터빈은 터보펌프를 작동시킨다. 터보펌프의 터빈을 통과한 연소가스는 고온 고압의 상태로 연소기로 공급되는데, 이때 연료 또는 산화제의 양에 따라 연소가스는 연료 과잉 또는 산화제 과잉 상태로 공급된다. 산화제 과잉상태의 환경에서 금속 배관은 작은 입자의 충격에 의해서도 발화 또는 폭발될 수 있다. 이를 방지하기 위해 로켓 선진 국가에서는 산화제가 이동하는 공간에 내산화 코팅을 한다. 본 연구에서는 해외 내산화 코팅 물질 분석을 통해 국산 조합분말을 개발하였고, 코팅공정을 수립하였다. 개발된 조합분말을 이용하여 코팅 후 내산화 시험을 수행하였으며, 그 결과 질량변화량이 -0.16%~+0.01% 임을 확인하였다. 본 연구결과로부터 개발된 유약은 실물형 연소기의 내산화 코팅에 적용이 가능할 것으로 판단되며, 향후 연소시험을 통한 개발기술의 검증을 진행할 계획이다.

• 대한조선학회논문집
• /
• 제46권2호
• /
• pp.97-104
• /
• 2009

Ever increasing fuel prices, almost doubled in the last three years, and global pressure to reduce their environmental impact have been enforcing commercial vessel operators and designers to re-assess current vessel designs with emphasis on their propulsion systems and operational practices. In this paper the "Inclined Keel Hull (IKH)" concept, which facilitates to use larger propeller diameter in combination with lower shaft speed rates and hence better transport efficiency, is explored for a modern 3600 TEU container vessel with the aim of fitting an 13 % larger diameter propeller (and hence resulting 20% lower rpm) to gain further power saving over the similar size basis container ship with conventional "level keel" configuration. It appears that successful application of the "inclined keel Hull" concept is a fine balance amongst the maximum gain in propulsive efficiency, minimum increase in hull resistance and satisfaction of other naval architectural and operational requirements. In order to make the concept economically more viable, this paper concentrates on the fore body design with the possible combination of increase of volume in its fore body to recover the expected volume loss in the aft body due to the space for larger propeller and its low wave-making resistance to minimize the efficiency loss using a well-established optimization software.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.813-816
• /
• 2010

최근 지속가능한 개발의 개념은 국제적으로 경제 개발과 환경 보전 사이에서 논쟁이 중심이 되고 있으며, 수자원 개발과 관리는 이들 논쟁에서 중요한 부분을 차지하고 있다. 이와 더불어 유역을 관리함에 있어 수자원을 이수, 치수 및 수질의 단일 문제로 인식하는 것이 아니라 통합적으로 인식하는 유역통합관리(Integrated Watershed Management, IWM)의 필요성이 대두되고 있다. 이에 본 연구는 유역통합관리에 앞서 유역의 상태 및 문제점을 파악하기 위한 방법으로 EEA (European Environment Agency)에서 개발한 추진력(Driving force)-압력(Pressure)-상태(State)-영향(Impact)-반응(Response) (DPSIR) 개념 이용하여 3개의 세부 지표인 이수지표, 치수지표, 수질지표로 구성된 하나의 통합 지수인 유역수자원평가지수를 개발하였다. 세부지표인 이수지표는 연속무강우일수, 인구밀도, 용수수요, 물재이용률 등 16개의 구성요소, 치수지표는 홍수범람위험 지역 내 거주 인구수, 홍수방어시설용량, 개수율, 100 mm 이상 강수일수 등 15개의 구성요소, 수질지표는 BOD (Biochemical Oxygen Demend) 부하량, 수질 등급, 연중 목표 수질 달성일수 등 13개의 구성요소로 이루어져있다. 이를 북한강 유역 중 북한 지역을 제외한 유역 즉, 수자원단위지도 상의 춘천댐권역(1010) ~ 청평댐권역(1015)의 6개 중권역에 적용하여 비교하였다. 세부지표의 주된 요소인 유출량의 모의를 위해 장기유출모형인 HSPF (Hydrological Simulation Program - Fortran)를 사용하였다. 모형에 입력된 유역평균강수량 자료는 1973년 ~ 2008년까지의 37년의 자료기간을 갖는 북한강유역의 5개 기상관측소 자료를 Thiessen network를 이용하여 산정하였다. 본 연구를 통해서 북한강 유역의 현재 수자원의 상태를 지수화하여 나타내고 그 결과를 비교해보았다. 이 결과는 유역 수자원의 파악하여 유역통합관리시 유역의 문제점을 파악하고 이를 수정하기 위한 의사결정 우선순위를 정하는데 사용될 수 있다.

• 한국정밀공학회지
• /
• 제29권3호
• /
• pp.289-294
• /
• 2012

There are several indicators to represent characteristics of chemical mechanical planarization (CMP) such as material removal rate (MRR), surface quality and removal uniformity on a wafer surface. Especially, the removal uniformity on the wafer edge is one of the most important issues since it gives a significant impact on the yield of chip production on a wafer. Non-uniform removal rate at the wafer edge (edge effect) is mainly induced by a non-uniform pressure from nonuniform pad curvature during CMP process, resulting in edge exclusion which means the region that cannot be made to a chip. For this reason, authors tried to minimize the edge exclusion by using an edge profile control (EPC) ring. The EPC ring is equipped on the polishing head with the wafer to protect a wafer from the edge effect. Experimental results showed that the EPC ring could dramatically minimize the edge exclusion of the wafer. This study shows a possibility to improve the yield of chip production without special design changes of the CMP equipment.

• 대한한의진단학회지
• /
• 제17권3호
• /
• pp.179-188
• /
• 2013

Objectives This study was designed to development the diagnosis indicators for the fatigue group without disease using analysis of questionnaire data. Methods The subjects were divided into three groups, the fatigue group with disease, the fatigue group without disease, non-fatigue group without disease. Thirteen kinds of questionnaire (Fatigue visual analogue scale, Fatigue severity scale, Pain visual analogue scale, Short-form McGill pain questionnaire score, Headache impact Test-6, Neck disability index, Oswestry low back pain disability questionnaire score, Blood stasis assessment scale, Physical activities questionnaire score, Beck depression inventory, Anger expression inventory score, Mood disability scale, Job stress scale) were carried out for the subjects. Results The results of this study are ; 1) The weight, the systolic and diastolic blood pressure were different among three groups. 2) Among nine questionnaires related to the physical or life conditions, the averages of eight questionnaires were not same one another. 3) Among four questionnaires related to the mental condition or autonomic nervous system, the averages of Beck depression inventory were not same one another. Conclusion The fatigue group without disease can be diagnosed through using the both the questionnaires related to the physical or life condition and the those related to the mental condition or autonomic nervous system.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2000년도 추계학술발표회 초록집
• /
• pp.1-2
• /
• 2000

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the onventional rotating barrel, vibrational barrel(vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components. The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed thatbthe average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value. Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components. However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. 2H20 + e $\rightarrow$M/TEX> 20H + H2.. Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure there by resulting to bad plating condition.

• 한국가스학회지
• /
• 제19권6호
• /
• pp.62-66
• /
• 2015

LNG선이나 해양플랜트 같은 설비나 구조물은 작동 조건을 고려할 때, 특히 부재마다 가지는 고유한 연성 취성천이온도(Ductile to Brittle Transition Temperature, DBTT)를 고려하여 설계되어야 한다. 본 연구에서는 해양플랜트 및 LNG선에 hull plate로 쓰이는 A-grade 연강(mild steel)에 대해 DBTT를 샤르피 V-노치(CVN) 실험을 통해 알아보았고 파괴형상을 통한 파괴거동을 살펴보았다. 그 결과 온도가 감소함에 따라 충격 흡수에너지는 감소함을 보였다. Upper shelf energy region과 lower shelf energy region이 나타나고 그 사이 구간의 천이점을 통해 DBTT가 결정되었다. 파괴형상에서는 upper shelf energy region에서 수많은 딤플이 연성파괴 형상으로 관찰되고 lower shelf energy region에서는 전형적인 취성파단형상이 관찰되었다. 이를 통해 BCC 구조를 가지는 A-grade 연강은 upper shelf energy 구역과 lower shelf energy구역을 보이고 그 사이 구간의 천이점에서 급격하게 온도가 떨어지는 DBTT구간을 뚜렷하게 보이는 특성을 알 수 있었다.

• 한국가스학회지
• /
• 제21권1호
• /
• pp.72-79
• /
• 2017

극한지 천연가스 배관의 운전온도 범위는 가스 공급을 최적화하고 운전동안 극한지 환경에 대한 충격을 최소화하기 위해 기본적으로 제어되어야 한다. 배관에 흐르는 가스의 온도는 Joule-Thomson 효과와 배관과 토양의 열전달에 의존한다. 따라서 본 연구에서는 매설 천연가스 배관의 열전달과 Joule-Thomson 효과를 상세히 고려하였다. 토양온도는 $0{\sim}-20^{\circ}C$, 총괄열전달계수는 $0{\sim}5.5W/m^2K$로 가정하였다. 토양온도와 총괄열전달계수 변화에 따른 배관 길이방향의 가스온도 변화와 압력손실을 동시에 계산하였다. 또한, 본 연구에서는 HYSYS 프로그램을 사용하여 토양온도와 총괄열전달계수에 따른 상변화와 하이드레이트 생성을 예측하였다.