• Advances in concrete construction
• /
• 제7권1호
• /
• pp.23-30
• /
• 2019

Five key items were used to create an economical and physically small impact test device for concrete panels subject to high speed collision: an air-compressive system, carbon steel pipe, solenoid valve, carrier and carrier-blocking, and velocity measurement device. The impact test device developed can launch a 20 mm steel spherical projectile at over 200 m/s with measured impact and/or residual velocity. Purpose for development was to conduct preliminary materials tests, prior to large-scale collision experiments. In this paper, the design process of the small impact test device was discussed in detail.

• Journal of Biosystems Engineering
• /
• 제26권2호
• /
• pp.115-122
• /
• 2001

An impact-type seed-metering device was developed for the planting of rice-pellets. In this study, new design of pellet-metering device focused on simplicity and precision seeding for the planting of rice-seed pellets. In addition of seed-metering device, several devices were also developed such as seed-guiding device, seed-supplying tube and furrow opener for precision pellet planting. Field test was conducted to estimate the planting performance of the developed metering device. As a cam rotates, the impact bar of the metering device pushes a rice-seed pellet so that the seed can be discharged from the seed-supplying tube in the impact-type seed-metering device. Results of the tests showed that mean seeding spacing was 12cm at the traveling speed of 1.0m/s, corresponding to a target spacing for planting of rice-seed pellets. Also, both miss-seeded rate and damaged-seed rate were less than 2.0%, indicating acceptable levels for the precision planting. The developed mechanism of the impact-type metering device can be directly applied to the design of metering devices for the precision pellet planting of other crops.

• 한국운동역학회지
• /
• 제22권2호
• /
• pp.243-251
• /
• 2012

The purpose of this study was to develop an impact force measurement device in order to facilitate the acquisition of quantitative data for the analysis of various sporting events. The device was designed to include cylindrical aluminum supports of 220 mm diameter, which allows mounting and dismounting of the device on walls and frames. In addition, a hard sponge for impact absorption, as well as 4 springs, were attached to the plate. Both were attached to prevent psychological variables and injuries. When a subject applies force on the device, accurate data about the maximum repulsive force is acquired in real time, with a lag of only 0.001 s. The device was calibrated in four steps: (1) increase, (2) increase, (3) increase-decrease, and (4) increase-decrease. The maximum relative expanded uncertainty was 0.166%, indicating that the impact force measurement was sufficiently reliable. The proposed device can be applied to various sporting situations and is expected to be useful for studying kinetics.

• 한국군사과학기술학회지
• /
• 제18권5호
• /
• pp.525-531
• /
• 2015

In this paper, a novel impact sensing device for an ESAF(Electronic Safe and Arming Fuze) is presented. An impact sensing device is mounted in front of a weapon, and it detects an impact when it crashes against a target. There are two main design requirements to enhance the firing functional reliability of the ESAF; an operational reliability and a reduced latency, which is a delay time needed for sensing the impact. The design method of the contact-type impact sensing device, which employs an FPCB(Flexible Printed Circuit Board) so it can be used other weapons, is proposed. The tests demonstrated that the design described in this work show a reduced delay time with ensuring the operational reliability.

• 한국정밀공학회지
• /
• 제25권4호
• /
• pp.140-147
• /
• 2008

This paper represents an ultra precision rotational device where the smooth impact drive mechanism (SIDM) is utilized as driving mechanism. Linear motions of piezoelectric elements are converted to the rotational motion of disk by frictional forces generated between the rotational disk and the friction part that is attached to the piezoelectric element. This device was designed to drive the rotational disk using slip-slip motion mechanism instead of stick-slip motion mechanism occurred in conventional impact drive mechanism. Experimental results show that the angular velocity is increased in proportion to the magnitude and frequency of supplied voltage to piezoelectric element and decreased as the preload is increased. In our device, the smooth rotational motion was obtained when the driving frequency has been reached to 500Hz under the driving voltage of 100V.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.121-121
• /
• 2000

This paper presents a design of macro-micro system for high-speed mounting of micro-chips. A macro motion device is driven by DC servomotor and ball screw mechanism. To obtain fast response, a micro motion device utilizes a precision elector magnetic actuator In order to reduce peak impact force, We evaluate the design parameters that have an effect on it. And a characteristic of response is simulated using PID controller in velocity and force control.

• 전자공학회논문지A
• /
• 제33A권4호
• /
• pp.129-135
• /
• 1996

In this paper, the hot carrier effect and device degradation of deep submicrometer SC-PMOSFETs have been measured and characterized. It has been shown that the substrate current of a 0.15$\mu$m PMOSFET increases with increasing of impact ionization rate, and the impact ionization rate is a function of the gate length and gate bias voltage. Correlation between gate current and substrate current is investigated within the general framework of the lucky-electron. It is found that the impact ionization rate increases, but the device degradation is not serious with decreasing effective channel length. SCIHE is suggested as the possible phusical mechanism for enhanced impact ionization rate and gate current reduction. Considering the hot carrier induced device degradation, it has been found that the maximum supply voltage is about -2.6V for 0.15$\mu$m PMOSFET.

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.49-57
• /
• 2010

This paper describes the design, construction, and fundamental testing of a precision rotational device that utilizes piezoelectric elements as a source of driving force and impact drive mechanism as a driving principle. A novel device structure is designed and the numerical simulations about the static displacement, stress distribution, and mode shape of the designed structure are performed. A fabricated rotational device has been rotated successfully by applying saw-shaped voltages to the piezoelectric elements. The one-step rotational angle was $0.44{\times}10^{-3}$ rad at the applied voltages of 80V. The angular velocities of the device were revealed to be increased as the driving frequency and voltage were respectively increased and the preload was decreased. The device has a feature that it can be translated as well as rotated. An experimental result shows that the device was translated by ${\pm}4.56{\mu}m$ maximum when the 120V sinusoidal voltages with a phase difference of $180^{\circ}$ were respectively supplied to two piezoelectric elements.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.485-486
• /
• 2006

This paper represents a ultra precision rotational device where the smooth impact drive mechanism(SIDM) is utilized as a driving mechanism. Linear motions of piezoelectric elements are converted to the rotational motion of disk by frictional forces generated between the rotational disk and the friction bars which are attached to the piezoelectric elements. This device was designed to drive a rotational disk using slip-slip motion mechanism based on stick-slip motion mechanism. Experimental results show that the angular velocity was increased in proportion to the magnitude of supplied voltage to piezoelectric element. In our device, the smooth rotational motion was obtained when the driving frequency has been reached to 500Hz under the driving voltage of 100V. The amount of step movement has been revealed to be $3.44{\times}10^{-4}$ radian.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.726-729
• /
• 2004

This paper concerns on developing a multi-purpose test device for measuring mechanical properties of shoes. The device was modified from a commercial robot manipulator, with which impact, bending, and pronation tests were suggested to evaluate performances of shoes. From several experiments, the developed device could produce repetitive and consistent results corresponding to the different material of shoes. In the shoe industry, it is expected that the device could contribute to developing a better shoe for comfort of costumers.