• Journal of Gastric Cancer
• /
• v.22 no.3
• /
• pp.235-247
• /
• 2022

Purpose: Most studies have investigated the differences in postgastrectomy quality of life (QOL) based on the surgical procedure or reconstruction method adopted; only a few studies have compared QOL based on tumor location. This large-scale study aims to investigate the differences in QOL between patients with esophagogastric junction cancer (EGJC) and those with upper third gastric cancer (UGC) undergoing the same gastrectomy procedure to evaluate the impact of tumor location on postoperative QOL. Methods: The Postgastrectomy Syndrome Assessment Scale-45 (PGSAS-45) questionnaire was distributed in 70 institutions to 2,364 patients who underwent gastrectomy for EGJC or UGC. A total of 1,909 patients were eligible for the study, and 1,744 patients who underwent total gastrectomy (TG) or proximal gastrectomy (PG) were selected for the final analysis. These patients were divided into EGJC and UGC groups; thereafter, the PGSAS-45 main outcome measures (MOMs) were compared between the two groups for each type of gastrectomy. Results: Among the post-TG patients, only one MOM was significantly better in the UGC group than in the EGJC group. Conversely, among the post-PG patients, postoperative QOL was significantly better in 6 out of 19 MOMs in the UGC group than in the EGJC group. Conclusions: Tumor location had a minimal effect on the postoperative QOL of post-TG patients, whereas among post-PG patients, there were definite differences in postoperative QOL between the two groups. It seems reasonable to conservatively estimate the benefits of PG in patients with EGJC compared to those in patients with UGC.

• Journal of Environmental Science International
• /
• v.18 no.8
• /
• pp.833-839
• /
• 2009

The calculation of the wind field for resource assessment is done by using CFD Reynolds-Averaged Navier-Stokes simulations performed with the commercial software WindSim. A new interface has been created to use mesoscale simulation data from a meteorological model as driving data for the simulations. This method makes it necessary to take into account thermal effects on the wind field to exploit the full potential of this method. The procedure for considering thermal effects in CFD wind field simulations as well as the impact of thermal effects on the wind field simulations is presented. Simulations for non-neutral atmospheric conditions with the developed method are consistent with expected behavior and show an improvement of simulation results compared with observations.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1997.10a
• /
• pp.94-97
• /
• 1997

The purpose of this paper is to publish IITA's R&D planning and selection procedures for review by outside panels and by industry. The paper illustrates the detailed procedure and criteria used at each phase of evaluation process to the results of National Survey for Information and Telecommunication Technology Needs. Total 293 project ideas come from industry, government-supported research institutes, and universities. Candidate projects are not evaluated on the basis of what technology is proposed, but on how sound the proposed idea is within that technology and on the potential economic impact. In addition, an industrial assessment of the project ideas was performed as part of an evaluation process. At a final stage, 90 projects are selected.

• Asia pacific journal of information systems
• /
• v.10 no.2
• /
• pp.149-176
• /
• 2000

As companies become more dependent upon information systems(IS), the potential losses of IS resources become critical. IS management must assume the increasing responsibility for protection of IS resources as the IS and business environments become more vulnerable to various threats. The major issues facing management, when attempting to manage risks, include the assessment of the impact of risks on business objectives and the design of security safeguards to reduce the unacceptable risks to an acceptable level. This paper provides a case study of the risk management for IS. A Korean credit card company which has the high sensitivity for customers security was selected as a case. The risk management procedure using a powerful tool, CRAMM(the Central Computer and Telecommunications Agencys Risk Analysis and Management Method) was applied for this company.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.1
• /
• pp.83-88
• /
• 2016

This paper describes the test results of plant minimum stable load (Pmin) for Ilijan Power Plant. The test was conducted on May 13 through 14, 2015 to investigate the plant operating and equipment condition in accordance with "Ilijan Plant Performance Test Procedure on Plant Minimum Stable Load" [1]. This paper also contains the assessment of the impact of Pmin to plant operating parameters and possible technical operating issues when operating at lower loads and to recommend the safe minimum load operation of Ilijan per block. In addition, this paper describes the performance calculation results of efficiency and heat rate depending on the load level.

• Journal of Korea Water Resources Association
• /
• v.51 no.spc
• /
• pp.1079-1089
• /
• 2018

The majority of existing studies for quantifying uncertainties in climate change impact assessments suggest only the uncertainties of each stage, and not the total uncertainty and its propagation in the whole procedure. Therefore, this study has proposed a new method, the Uncertainty Delta Method (UDM), which can quantify uncertainties using the variances of projections (as the UDM is derived from the first-order Taylor series expansion), to allow for a comprehensive quantification of uncertainty at each stage and also to provide the levels of uncertainty propagation, as follows: total uncertainty, the level of uncertainty increase at each stage, and the percentage of uncertainty at each stage. For quantifying uncertainties at each stage as well as the total uncertainty, all the stages - two emission scenarios (ES), three Global Climate Models (GCMs), two downscaling techniques, and two hydrological models - of the climate change assessment for water resources are conducted. The total uncertainty took 5.45, and the ESs had the largest uncertainty (4.45). Additionally, uncertainties are propagated stage by stage because of their gradual increase: 5.45 in total uncertainty consisted of 4.45 in emission scenarios, 0.45 in climate models, 0.27 in downscaling techniques, and 0.28 in hydrological models. These results indicate the projection of future water resources can be very different depending on which emission scenarios are selected. Moreover, using Fractional Uncertainty Method (FUM) by Hawkins and Sutton (2009), the major uncertainty contributor (emission scenario: FUM uncertainty 0.52) matched with the results of UDM. Therefore, the UDM proposed by this study can support comprehension and appropriate analysis of the uncertainty surrounding the climate change impact assessment, and make possible a better understanding of the water resources projection for future climate change.

• Journal of Environmental Impact Assessment
• /
• v.30 no.4
• /
• pp.225-236
• /
• 2021

The master plan for the Four Rivers Restoration Project (June 2009) was devised, the procedure of pre-environmental review (June 2009) and environmental impact assessment (Nov. 2009), and post-environmental impact survey were implemented, and 4 times audits also inspected. and finally the Ministry of Environment's Four Rivers Investigation and Evaluation Planning Committee proposed the dismantling or partial dismantling of the five weirs of the Geum River and Yeongsan River. But controversies and conflicts are still ongoing. Therefore, this study intend to reestablish the management plan for the four major rivers by reviewing and analyzing the process so far. The results are as follows. First, a cost-benefit analysis should be performed by comparing the water quality impact of weir operation and weir opening. Therefore, it is inevitably difficult to conduct cost-benefit analysis. Second, according to the results of cost-benefit analysis on the dismantling of the Geum River and the Yeongsan River, the dismantling of the weir and the regular sluice gate opening was decided. However, there is a problem in the validity of the decision to dismantle the weir because the cost-benefit analysis for maintaining the weir is not carried out. Third, looking at the change in water quality of 16 weirs before and after the Four Major Rivers Restoration Project, COD and Chl-a were generally deteriorated, and BOD, SS, T-N, and T-P improved. However, in the cost-benefit analysis related to water quality at the time of weir dismantling, only COD items were targeted. Therefore, the cost of BOD, SS, T-N, and T-P items improved after the project were not reflected in the cost-benefit analysis of dismantling weirs, so the water quality benefits were exaggerated. Fourth, in the case of Gongju weir and Juksan weir, most of them are movable weirs, so opening the weir alone can have the same effect as dismantling when the water quality deteriorates. Since the same effect can be expected, there is little need to dismantle the weirs. Fifth, in order to respond to frequent droughts and floods, it is desirable to secure the agricultural water supply capacity to the drought areas upstream of the four majorrivers by constructing a waterway connected to the weir. At present it is necessary to keep weirs rather than dismantling them.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.448-456
• /
• 2003

The prime objective of many facial wrinkle-reduction treatments is to achieve visible improvement. Thus the visibility of before/after treatment differences is often part of an efficacy assessment. This paper investigates whether the background knowledge of the people acting as observers in such assessments is of impact on the results: e.g. the subjects themselves are familiar with their faces, skin professionals have much experience in judging skin quality, and thus both might be more sensitive to small changes. In a clinical study 44 Female subjects were regularly treated during a period of 12 weeks with one of three wrinkle-reduction methods: K, Land M (placebo). Photographs were taken before treatment and at 6 and 12 weeks. The photographs were judged by 3 types of observers:ㆍ24 Lay observers were given the 0＆6-week and the 0＆12-week photo pairs of all subjects to indicate the one with the least wrinkles in a two-alternative forced-choice (TAFC) procedure.ㆍThe subjects themselves were given the 0＆6-weel and the 0＆12-week pair of their own photos (8 replications) to indicate the photo with the least wrinkles (TAFC).ㆍA trained panel of skin professionals (N=3) each gave 9-point Fitzpatrick wrinkle-severity scores for all individual 0-week and 12-week photos. We found that the lay observers perceived the same differences as the subjects themselves: significant improvements after 12 weeks for treatment K (p<0.0005 and p=0.005, respectively), no visible effects for treatments Land M, and, most importantly, a significant difference between treatments K and M/placebo (p=0.02 and p=0.04, respectively). Also the trained panel found this difference between K and M (p=0.013), but here it was due to a significant deterioration over time of the 'placebo-treated' wrinkles (M, p=0.03). Thus in conclusion we have found no indications that extra knowledge - in the form of familiarity with the own face or in the form of professional training - results in the identification of more treatments that show significantly visible wrinkle-reduction.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.4
• /
• pp.617-637
• /
• 2010

As the impact of S&T on daily life increases, efforts to predict and anticipate the adverse effects of S&T development on human society and the natural environments are reinforced. In addition, public character of S&T demands wider participation of various stakeholders in R&D process. In response to these demands, Technology Assessment (TA) was introduced in the process of S&T policy formation. The Korean TA exercises were carried out 5 times since 2003 through 2008 by Korea Institute of S&T Evaluation and Planning (KISTEP), the necessity of which was incorporated in the S&T basic law. TA in Korea has been continuously upgraded in terms of organizational structure and procedure, but still in progress to take into account of problems exposed so far. In this paper, problems of TA in Korea are examined in terms of law, sponsor, management, and utilization. Suggestions for its improvement such as sophistication of methods and linking to national S&T planning are proposed.

• Smart Structures and Systems
• /
• v.24 no.5
• /
• pp.669-681
• /
• 2019

Bridge collapses may deliver a huge impact on our society in a very negative way. Out of many reasons why bridges collapse, poor maintenance is becoming a main contributing factor to many recent collapses. Furthermore, the aging of bridges is able to make the situation much worse. In order to prevent this unwanted event, it is indispensable to conduct continuous bridge monitoring and timely maintenance. Visual inspection is the most widely used method, but it is heavily dependent on the experience of the inspectors. It is also time-consuming, labor-intensive, costly, disruptive, and even unsafe for the inspectors. In order to address its limitations, in recent years increasing interests have been paid to the use of unmanned aerial vehicles (UAVs), which is expected to make the inspection process safer, faster and more cost-effective. In addition, it can cover the area where it is too hard to reach by inspectors. However, this strategy is still in a primitive stage because there are many things to be addressed for real implementation. In this paper, a typical procedure of bridge inspection using UAVs consisting of three phases (i.e., pre-inspection, inspection, and post-inspection phases) and the detailed tasks by phase are described. Also, three major challenges, which are related to a UAV's flight, image data acquisition, and damage identification, respectively, are identified from a practical perspective (e.g., localization of a UAV under the bridge, high-quality image capture, etc.) and their possible solutions are discussed by examining recently developed or currently developing techniques such as the graph-based localization algorithm, and the image quality assessment and enhancement strategy. In particular, deep learning based algorithms such as R-CNN and Mask R-CNN for classifying, localizing and quantifying several damage types (e.g., cracks, corrosion, spalling, efflorescence, etc.) in an automatic manner are discussed. This strategy is based on a huge amount of image data obtained from unmanned inspection equipment consisting of the UAV and imaging devices (vision and IR cameras).