• Journal of Acupuncture Research
• /
• v.34 no.3
• /
• pp.121-130
• /
• 2017

Objectives : The purpose of this study was to report the clinical effects of the Graston Technique and Chuna manual therapy, combined with Korean Medical Treatment for fibromyalgia. Methods : We treated a patient diagnosed with fibromyalgia. We used acupuncture, the Graston Technique, Chuna manual therapy, pharmacopuncture, herbal medicine, moxibustion and physical therapy. Outcomes were evaluated using the American College of Rheumatology Preliminary Diagnostic Criteria (ACR), the Fibromyalgia Impact Questionnaire (FIQ), and the Numeric Rating Scale (NRS). Results : The widespread pain index (WPI) scale score of the ACR decreased from 12 to 9, and the symptom severity scale (SS) score of the ACR decreased from 8 to 6. The FIQ score decreased from 63.69 to 50.15. On the NRS, lower back pain & lower limb pain decreased from 6 to 2; neck pain from 6 to 3; muscle tenderness & morning stiffness from 6 to 4; fatigue from 6 to 3; urticaria from 6 to 2. Conclusion : This case study suggests that the Graston Technique and Chuna manual therapy combined with Korean Medical Treatment may be effective treatments for fibromyalgia. However, further studies are needed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3A
• /
• pp.183-188
• /
• 2012

The bonded tendon was adopted to the reactor containment building of some operating nuclear power plants in Korea and the assessment of the prestress force on the bonded tendon is very important for the evaluation of the structural integrity. The prestress force of the bonded tendon at real reactor containment building, was evaluated using the SI technique and impact signal analysis technique which were developed to improve the existing indirect assessmment technique. For these techniques, the strain of the reactor containment building and the stress wave velocity of the bonded tendon were measured. Both SI technique and impact signal analysis technique give the highly reliable results comparison with the existing theoretical approach. Therefore, it is confirmed that the developed techniques are very useful for the evaluation of the prestress force on the bonded tendon.

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.15-24
• /
• 2012

The purpose of this study is to understand the process and characteristics of social impact caused by development projects through research and analysis on issues presented during development projects carried out in Korea. Furthermore, on the basis this analysis, this study proposes possible improvement measure environmental impact assessment for minimizing social impact of development projects in the future. Issues related to development projects are generated mainly by the following three causes. Initial social impact can occur when a development project directly causes certain changes in natural, living and social environment. Operational problems related to assessment are another cause of social impact, and it can also occur when changes in natural and living environment work in tandem with social environment sphere. Social impact of development projects is not brought about solely by changes in social environment, but is the result of interaction of factors such as changes in social, natural, living environment and problems related to assessment or operation/management. As to why the current environmental impact assessment could not provide satisfactory solution to the issues mentioned above, this study suggests the following reasons: limitations of assessment method used in social environment category, difficulties in defining assessment criteria, limitations inherent in criterion referenced assessment method, insufficient issue-making in local community, and lack of participation on the part of local residents. Possible solutions for these limitations are as follows: 1) To identify local issues in social environment category through participation of local experts in scoping stage, 2) To adopt deliberative method for local participation, 3) To utilize social survey technique.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.849-853
• /
• 2002

A specific experimental method, the split Hopkinson pressure bar (SHPB) technique has been widely used to determine the dynamic material properties under the impact compressive loading conditions with strain-rate of the order of 103/s~104/s. In this paper, dynamic deformation behaviors of rubber materials widely used for the isolation of vibration from varying structures under dynamic loading are determined using a Split Hopkinson Pressure Bar technique.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.4
• /
• pp.308-315
• /
• 2009

Because the attenuation of AE signal in composite materials is relatively higher than that of metallic materials, it is required to develop a damage assessment technique less affected by the attenuation property of composite materials in order to use AE sensing as a damage detection method. In the signal processing procedure, it is profitable to use the leading wave that arrives first because the leading wave is less influenced by the boundary conditions. Using wavelet transform, we investigated the frequency characteristics of impact induced AE signals focused on the leading wave in advance and chose the key factors to discriminate the damaged condition quantitatively. In this research, we established a damage assessment technique using the sharing percentage of the wavelet detail components of AE signal, and conducted a low-velocity impact test on composite laminates to confirm the feasibility of the proposed signal processing method.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.2
• /
• pp.75-84
• /
• 2010

An in-cabinet response spectrum should be generated to perform the seismic qualification of devices and instruments mounted inside safety-related electrical equipment installed in nuclear power plants. The response spectrum is available by obtaining accurate seismic responses at the device mounting location of the cabinet. The dynamic behavior of most of electrical equipment may not be easily analyzed due to their complex mass and stiffness distributions. Considering these facts, this study proposes a procedure to estimate the seismic responses of a structure by a combination of a test and subsequent analysis. This technique firstly constructs the modal equations of the structure by using the experiment modal parameters obtained from the impact test. Then the seismic responses of the structure may be calculated by a mode superposition method. A simple steel frame structure was fabricated as a specimen for the validation of the proposed method. The seismic responses of the specimen were estimated by using the proposed technique and compared with the measurements obtained from the shaking table tests. The study results show that it is possible to accurately estimate the seismic response of the structure by using the experimental modal parameters obtained from the impact test.

• International Journal of Knowledge Content Development & Technology
• /
• v.12 no.4
• /
• pp.25-39
• /
• 2022

Perceptions of Library and Information (LI) professionals in Nigeria and the impact of COVID-19 on libraries, librarians and library services, were studied. The significance of demographic factors on LI professionals' perception of COVID-19 and its impact on libraries was tested. Descriptive survey design and Purpose sampling technique were adopted. LIS professionals in Nigeria constituted the population, and an online questionnaire designed by the researchers through Microsoft Forms was used. Descriptive analysis of respondents' demographic data and their covid-19 perception were presented in frequencies and percentages using tables while multivariate regression technique was used to test the significance of relationship between variables at P < 0.05. Findings revealed that many (61.4%) of the respondents agreed that COVID-19 is real but have personal reservations. However, 47.5% indicated that COVID-19 is a scientific invention. On the impacts of COVID-19 on libraries, the study found that COVID-19 is a game changer that will enhance the creation of new services by libraries, cause the reconfiguration of library space for safe operations in post-COVID, establishment of new rules and regulations, and more reliance on e-resources. On the test of association, educational qualification of respondents had a significant impact on respondents' perceptions that COVID-19 will reduce the use of library print resources (P-value = 0.005, B: 0.38, [95% CI: 0.115 - 0.646]) and that library will create new services to address the changes caused by COVID-19. Also, educational qualification of respondents significantly influenced respondents' perception that COVID-19 is real. The study recommends that libraries should take advantage of the season to innovate, and that public health institutions should continually educate people on corona virus to disabuse people's mind of conspiracy theories.

• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.177-184
• /
• 2014

Flight safety analyses concerned with Launch Vehicle are performed to measure the risk to the people, ship and aircraft using impact point and impact dispersion area of debris generated by on-trajectory failures and malfunction turns. Predictions of impact point and impact dispersion area are essential for launch vehicle's flight safety analysis. Usually, impact dispersion area can be estimated in using Monte-Carlo simulation. However, Monte-Carlo method requires more several hundreds of iterative calculations which requires quite some time to produce impact dispersion area. Herein, we check the possibility of applying JU(Julier Uhlmann) transformation and Taguchi method instead of Monte-Carlo method and we propose a best method in terms of compuational time to produce impact dispersion area by comparing the results of the three methods.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.51-56
• /
• 2003

The piezoelectric thin film(PVDF: polyvinylidene fluoride) sensors having good dynamic sensing charachteristics can be used to monitor low vwlocit impact on composite structures. The impact response function for composite sandwich beam was derved. The impact tests at low energy without inducing damage were performed on the instrumented drop weight impact tester. The measured signals of PVDF sensors attached on the surface of the beam agreed well with the simulated signals. And the inverse technique was applied to reconstruct the impact forces from the PVDF sensor signals. Most of reconstructed impact forces showed good agreement with the measured forces. The comparison results showed that the piezoelectric thin film sensor can be used to monitor the low velocity impact on composite sandwich structures.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.2
• /
• pp.100-107
• /
• 2011

As construction duration significantly influences the performance and the success of construction projects, it is necessary to appropriately manage the impact factors affecting construction duration. Recently, interest in the construction industry has been rising due to the recent change in the construction legal system, and the competition among the construction companies on construction time. However, the impact factors are extremely diverse. The existing productivity data on impact factors is not sufficient to properly identify the impact factor and measure the productivity from various perspectives, such as subcontractor, time, crew, work and so on. In this respect, a multidimensional analysis by a data warehouse is very helpful in order to view the manner in which productivity is affected by impact factors from various perspectives. Therefore, this research proposes a method that effectively takes the diverse productivity data of impact factors, and generates a multidimensional analysis. Decision tree analysis, a data mining technique, is also applied in this research in order to supply construction managers with appropriate productivity data on impact factors during the construction management process.