• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.98-102
• /
• 2002

As the nuclear power plant has been operated continuously and increased gradually, transportation and storage of spent fuel are seriously considered nowadays. The transportation cask which contains radioactive material needs to be inspected about structural safety. About safety verification, description of IAEA Safety Standards states that cask must withstand hypothetical accident conditions. In this paper, 9m free drop impact analysis was performed for transportation cask and impact limiter by using the finite element methods. Furthermore, we obtained the dynamic behavior of wood to as compared with safety test results, and verified the safety of transportation cask.

• Journal of Auto-vehicle Safety Association
• /
• v.16 no.2
• /
• pp.34-43
• /
• 2024

As the autonomous vehicle is to come to the commercial market, passive safety of the vehicles becomes ever more important, since more responsibility of the car crash accidents will be imposed on the car makers. To cope with such a requirements, comprehensive studies are under progress in car OEM's as well as relevant institutes. In this study FE models of two identical family sedans are utilized to investigate the effect of crash parameters like crash impact locations, and impact angle. Relationship between structural behavior of the car and the dummy injury measures is studied.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.2
• /
• pp.20-25
• /
• 2017

KNCAP is a program to evaluate the automobile safety, providing consumer vehicle safety assessment results. The safety evaluation tests are Frontal Impact, Offset Frontal Crash, Side Crash, Side Pole Crash, Rear Impact. This is the study of the offset frontal impact safety evaluation. Currently, IIHS is performing a small overlap test. NHTSA plans to implement the oblique moving deformable barrier test. Euro-NCAP plans to implement a mobile frontal impact test. Simulation is used to compare occupant behavior and injury. We have investigated whether the introduction of the test at KNCAP is necessary. The dummy model used in the simulation was the 50th percentile male Hybrid III dummy.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.4
• /
• pp.113-119
• /
• 2022

The structural safety of hydrogen buses is being evaluated for the successful introduction of hydrogen buses. The crash test methodology, for example, side impact test procedure is being discussed for hydrogen bus structure safety with a compressed hydrogen storage system located under the bus floor. Thus this study describes a new experiment method for side impact test with compressed hydrogen storage system independently based on finite element analysis instead of side impact test using full hydrogen bus. A side crash procedure of conceptual compressed hydrogen storage structure was investigated and impact simulations were performed. The finite element models of hydrogen bus, simplified structures, fuel tank system and side impact moving barrier were set up and simulation results reported model performance and result comparison of three different simplified models. Computational results and research discussion proposed the fundamental test framework for safety assessment of the compressed hydrogen storage system.

• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.83-89
• /
• 2013

Occupational Safety and Health Act provides that industrial safety helmets are personal protective equipment(PPE) to protect heads against falls from a height. Relevant domestic regulations are distinguished and different from other countries' cases. This study investigated industrial safety helmet's protective purposes and characteristics related to falls and the notion of fall prevention. A comparative analysis of regulations on safety helmets and fall prevention as well as standards on safety helmet's impact test requirements is followed by a literature review. It is also suggested that the term "fall" related to safety helmets should be changed to "impact on the upper part of head" in domestic regulations and standards.

• Journal of the Korean Society of Safety
• /
• v.20 no.4 s.72
• /
• pp.14-19
• /
• 2005

One area in which composites have been used rather extensively is for fabricating pressure vessel. These structures can be readily manufactured by filament winding, which is, as far as composite fabrication techniques are concerned, a relatively inexpensive method for producing composite structures. Unfortunately, the higher strength material and fabrication costs are not the only disadvantages of fiber-reinforced polymer composites when they are compared to metals. Additionally, these materials tend to exhibit brittle behavior. This is of particular concern when they are subjected to a low-velocity impact during routine handling a significant amount of structural damage can be introduced into the composites. The goals of this paper are to understand the impact damage behavior and identify the effect of surface coating materials on impact resistance in filament wound composite pressure vessels. For these, a series of low velocity impact tests was performed on specimens cutting from the full scale pressure vessel by the instrumented impact testing machine. The specimens are classified into two types with and without surface protective material. The visualization for impact damage is made by metallurgical microscope. Based on the impact force history and damage, the resistance parameters were employed and its validity in identifying the damage resistance of pressure vessel was reviewed. As the results, the impact resistance of the filament wound composites and its dependency on the protective material were evaluated quantitatively.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.397-416
• /
• 2020

Investigations of the commercial aircraft impact effect on nuclear island infrastructures have been drawing extensive attention, and this paper aims to perform the safety assessment of Generation III nuclear power plant (NPP) buildings subjected to typical commercial aircrafts crash. At present Part II, based on the verified finite element (FE) models of aircrafts Airbus A320 and A380, as well as the NPP containment and auxiliary buildings in Part I of this paper, the whole collision process is reproduced numerically by adopting the coupled missile-target interaction approach with the finite element code LS-DYNA. The impact induced damage of NPP plant under four impact locations of containment (cylinder, air intake, conical roof and PCS water tank) and two impact locations of auxiliary buildings (exterior wall and roof of spent fuel pool room) are evaluated. Furthermore, by considering the inner structures in the containment and raft foundation of NPP, the structural vibration analyses are conducted under two impact locations (middle height of cylinder, main control room in the auxiliary buildings). It indicates that, within the discussed scenarios, NPP structures can withstand the impact of both two aircrafts, while the functionality of internal equipment on higher floors will be affected to some extent under impact induced vibrations, and A380 aircraft will cause more serious structural damage and vibrations than A320 aircraft. The present work can provide helpful references to assess the safety of the structures and inner equipment of NPP plant under commercial aircraft impact.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.98-104
• /
• 2012

Current [Guideline for Installation and Management of Sidewalks and Safety Facilities on Roads] suggests that the types of curbs should be Barrier curb ($85^{\circ}$). Although Barrier curbs ($90^{\circ}$) were not specified in the guideline. The curbs installed on the roads currently are Barrier curbs ($90^{\circ}$) which are not specified in the installation standard. Therefore, it is critical to prepare for the installation standard of curbs by researching types of curbs and driving safety. This research have assessed the driving safety throughout Full Scale Crash Test according to type of curbs (Barrier curbs ($85^{\circ}$) and Barrier curbs ($90^{\circ}$)). Barrier curbs ($90^{\circ}$) showed higher figure in Theoretical head Impact Velocity, Post-impact Head Deceleration, Vehicle Damage when Crash, Passenger's Wounds Severity, and every other items than Barrier curbs ($85^{\circ}$). Barrier curbs ($85^{\circ}$) were found to have better Occupant Safety Index. Analysis of Behavior Using Full-Scale Crash Test showed difference depending on the Impact Condition between Barrier curbs ($85^{\circ}$) and Barrier curbs ($90^{\circ}$). Generally, Barrier curbs ($85^{\circ}$) were superior than Barrier curbs ($90^{\circ}$) in terms of protecting the passengers and vehicle damages. When an impact angle increases, Acceleration of Vehicle, Variations of Speed, and Contact Relationship between Wheels and Curbs, two types of curb showed similarity. However, if an impact of an angle decreases, Barrier Curbs ($85^{\circ}$) showed excellence in Driving Safety such as Acceleration of Vehicle, Variations of Speed, and Contact Relationship between Wheels and Curbs.

• Journal of Korean Society for Quality Management
• /
• v.51 no.2
• /
• pp.263-282
• /
• 2023

Purpose: This study aimed to examine the impact of FSSC 22000 food safety management system characteristics on the business performance of food-related companies and to verify the mediating effect of organizational capabilities in the relationship between them. Methods: To achieve this, a survey was conducted among employees of food companies in Seoul and the metropolitan area that have implemented the FSSC 22000 food safety management system, and the following main results were derived. Results: First, the FSSC food safety management system factors, such as measurement/analysis and improve- ment, documentation, management responsibility, and service and product realization, were found to have a significant positive (+) impact on organizational capabilities. The relative impact was in the order of measurement/analysis and improvement, documentation, management responsibility, and service and product realization. Second, organizational capabilities were found to have a significant positive (+) impact on business performance. Third, the FSSC food safety management system factors, such as measurement/analysis and improvement, management responsibility, resource management, and documentation, were found to have a significant positive (+) impact on business performance. The relative impact was in the order of measure- ment/analysis and improvement, management responsibility, resource management, and documentation. Fourth, the factors of management responsibility, resource management, measurement/analysis and improvement, and documentation, excluding resource management factors, were found to have a positive impact on business performance through the mediation of organizational capabilities. Conclusion: The results of this study may provide important implications for the implementation and efficient operation and management of the FSSC 22000 food safety management system in enhancing the business performance of food-related companies.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.2
• /
• pp.65-71
• /
• 2016

This study was aimed to demonstrate how the analysis of the impact on confidence in the safety-conscious organizations target the clothing distribution center employees and organizational commitment. Safety awareness of employees of the clothing distribution center safety rules, safety education, road safety interests, divided into risk handling and trusted organization with the emotional trust and cognitive trust, organizational commitment was divided into affective, cognitive and normative commitment. Data collection was surveyed 185 people clothing distribution center workers, tested the hypothesis through regression analysis. The results are safety conscious exerts a positive effect on organizational trust, organizational trust was found to have a positive impact on organizational commitment.