• 제목/요약/키워드: Impact Profile

검색결과 454건 처리시간 0.027초

급성 시상 경색으로 인한 미각 장애 치험 1례 (A Case Study of Dysgeusia in a Patient with an Acute Thalamic Infarction Treated with Korean Medicine)

  • 이미림;박민정;김경묵;조기호;문상관;권승원;정우상
    • 대한한방내과학회지
    • /
    • 제38권2호
    • /
    • pp.226-234
    • /
    • 2017
  • The case of a 73-year-old Korean female with dysgeusia due to an acute left thalamic infarction is presented. The patient was treated with the herbal medicine Yanggyuksanhwa-tang, in addition to acupuncture and electronic acupuncture treatment. The filter-paper test and Oral Health Impact Profile-14, (OHIP-14) test were administered to evaluate dysgeusia. Post-treatment, the patient's dysgeusia improved. Korean medicine may be an effective treatment for dysgeusia caused by a thalamic infarction.

노후 학교건물의 창호 교체에 따른 부하분석 (Analysis of Heating and Cooling Load Profile According to the Window Retrofit in an Old School Building)

  • 이예지;김주욱;송두삼
    • 설비공학논문집
    • /
    • 제29권9호
    • /
    • pp.455-462
    • /
    • 2017
  • The purpose of this study is to analyze heating and cooling load variation due to envelope retrofits in an old school building. In a previous study, envelope retrofit of an old school building resulted in annual energy consumption reduction. However, cooling energy consumption increased with the envelope retrofit. This is because of high internal heat generation rates in school buildings and internal heat cannot escape through windows or walls when the envelope's thermal performance improves. To clarify this assumption, thermal performance changes due to envelope retrofits were analyzed by simulation. Results revealed indoor temperature and inner window surface temperature increased with high insulation level of windows. Indoor heat loss through windows by conduction, convection and radiation decreased and resulted in an increase of cooling load in an old school building. From results of this study, energy saving impact of envelope retrofits in an old school building may not be significant because of high internal heat gain level in school buildings. In case of replacing windows in school buildings, local climate and internal heat gain level should be considered.

Absolute Radiometric Calibration for KOMPSAT-3 AEISS and Cross Calibration Using Landsat-8 OLI

  • Ahn, Hoyong;Shin, Dongyoon;Lee, Sungu;Choi, Chuluong
    • 한국측량학회지
    • /
    • 제35권4호
    • /
    • pp.291-302
    • /
    • 2017
  • Radiometric calibration is a prerequisite to quantitative remote sensing, and its accuracy has a direct impact on the reliability and accuracy of the quantitative application of remotely sensed data. This paper presents absolute radiometric calibration of the KOMPSAT-3 (KOrea Multi Purpose SATellite-3) and cross calibration using the Landsat-8 OLI (Operational Land Imager). Absolute radiometric calibration was performed using a reflectance-based method. Correlations between TOA (Top Of Atmosphere) radiances and the spectral band responses of the KOMPSAT-3 sensors in Goheung, South Korea, were significant for multispectral bands. A cross calibration method based on the Landsat-8 OLI was also used to assess the two sensors using near simultaneous image pairs over the Libya-4 PICS (Pseudo Invariant Calibration Sites). The spectral profile of the target was obtained from EO-1 (Earth Observing-1) Hyperion data over the Libya-4 PICS to derive the SBAF (Spectral Band Adjustment Factor). The results revealed that the TOA radiance of the KOMPSAT-3 agree with Landsat-8 within 5.14% for all bands after applying the SBAF. The radiometric coefficient presented here appears to be a good standard for maintaining the optical quality of the KOMPSAT-3.

국내 과실의 택배 유통환경 특성 (Characteristics of Domestic Distribution Environment for Parcel Delivery Service of Fruits)

  • 정현모;김수일
    • 한국포장학회지
    • /
    • 제21권2호
    • /
    • pp.61-65
    • /
    • 2015
  • Agricultural products packaged for transportation are put in the various dangerous environments owing to the damage factors like vibration, shock, compression, climate etc. under the distribution process. On fruits packaging for transportation, especially, the shock and vibration is considered as the most important damage factors. A major cause of shock damage to fruits is drops during manual handling. Especially, the damages of fruits during the parcel delivery service are very serious. The parcel delivery services of fruits are increasing and contribute to increasing of farm house earning. Also, the freight vehicle is mostly used to transport the fruits. Shock and impact generated by the freight vehicle may give serious damage to fruits. The optimum packaging design of parcel delivery service of fruits during transportation is required to reduce the fruits damages. In order to design the packaging system for parcel delivery service of fruits considering the transportation environment, the comprehension of characteristics for vibration and shock generated by manual handling and acting on transportation vehicles under various road conditions and loading methods is required. This research was performed to analyze the shock characteristics, acceleration level and power spectral density (PSD) during the parcel delivery service of fruits. The overall level of recommended PSD profile in a specific transportation of parcel delivery service for fruits was $0.63G_{rms}$.

  • PDF

Long-term follow-up of early cleft maxillary distraction

  • Park, Young-Wook;Kwon, Kwang-Jun;Kim, Min-Keun
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제38권
    • /
    • pp.20.1-20.6
    • /
    • 2016
  • Background: Most of cleft lip and palate patients have the esthetic and functional problems of midfacial deficiencies due to innate developmental tendency and scar tissues from repeated operations. In these cases, maxillary protraction is required for the harmonious facial esthetics and functional occlusion. Case presentation: A 7-year old boy had been diagnosed as severe maxillary constriction due to unilateral complete cleft lip and palate. The author tried to correct the secondary deformity by early distraction osteogenesis with the aim of avoiding marked psychological impact from peers of elementary school. From 1999 to 2006, repeated treatments, which consisted of Le Fort I osteotomy and face mask distraction, and complementary maxillary protraction using miniplates were performed including orthodontics. But, final facial profile was not satisfactory, which needs compromising surgery. Conclusions: The result of this study suggests that if early distraction treatment is performed before facial skeletal growth is completed, an orthognathic surgery or additional distraction may be needed later. Maxillofacial plastic and reconstructive surgeons should notify this point when they plan early distraction treatment for cleft maxillary deformity.

벤트 현상 및 크기에 따른 가스폭발 특성에 관한 실증적 연구 (A Experimental Study on the Characteristics of Gas Explosion due to Vent Shape and Size)

  • 채수현;정수일;이영순
    • 한국안전학회지
    • /
    • 제21권3호
    • /
    • pp.38-44
    • /
    • 2006
  • The majority of both small and large-scale experiments on gas explosion have been carried out in the explosion instruments with cylindrical tubes of a high length/diameter ratio and vessels of a high height/length ratio, focusing on investigating the interaction between propagating flame and obstacles inside the tubes or vessels. The results revealed that there is a strong interaction between the propagating flame and turbulence formed after the flame passes the obstacle. However this paper focuses on analyzing the pressure impact or profile outside the vent in vented gas explosion in a partially confined chamber by performing gas explosion experiments in a reduced-scale experimental assembly properly constructed. This study has considered eight different cases in gas explosion based on variation of three kinds of parameters such as height of vessel, shape of the vent and vent size, and reveals that the large vessel with big size circle vent is more danger to the target than others because the overpressure is spread out faraway horizontally and vertically.

생산직 근로자의 직무스트레스와 구강건강 관련 삶의 질의 관련성 (Relationship between job stress and oral health-related quality of life in the blue collar workers)

  • 김형란;조지영;유병철
    • 한국치위생학회지
    • /
    • 제16권3호
    • /
    • pp.479-489
    • /
    • 2016
  • Objectives: The purpose of the study is to investigate the relationship between job stress and oral health-related quality of life in the blue collar workers. Methods: This study has been conducted with subjects of blue-collar workers who work in the industrial section located in Gyeongnam area from August 2013 to September 2013. Korean Occupational Stress Scale(KOSS-SF) and oral health impact profile(OHIP-14) were used as research tools. Data were analyzed by descriptive analysis, t-test, ANOVA, and multiple regression analysis. Results: Overall job stress and oral heal-related quality of life level of subjects were $57.32{\pm}8.03$ and $14.17{\pm}9.27$. The influential factors of oral heal-related quality of life of blue-collar workers were job demand, interpersonal conflict and organizational climate (subcategory of job stress), respectively. Conclusions: It is necessary to improve the better working condition for the oral health-related quality of life due to job stress in the blue collar workers.

An empirical formulation to predict maximum deformation of blast wall under explosion

  • Kim, Do Kyun;Ng, William Chin Kuan;Hwang, Oeju
    • Structural Engineering and Mechanics
    • /
    • 제68권2호
    • /
    • pp.237-245
    • /
    • 2018
  • This study proposes an empirical formulation to predict the maximum deformation of offshore blast wall structure that is subjected to impact loading caused by hydrocarbon explosion. The blast wall model is assumed to be supported by a simply-supported boundary condition and corrugated panel is modelled. In total, 1,620 cases of LS-DYNA simulations were conducted to predict the maximum deformation of blast wall, and they were then used as input data for the development of the empirical formulation by regression analysis. Stainless steel was employed as materials and the strain rate effect was also taken into account. For the development of empirical formulation, a wide range of parametric studies were conducted by considering the main design parameters for corrugated panel, such as geometric properties (corrugation angle, breadth, height and thickness) and load profiles (peak pressure and time). In the case of the blast profile, idealised triangular shape is assumed. It is expected that the obtained empirical formulation will be useful for structural designers to predict maximum deformation of blast wall installed in offshore topside structures in the early design stage.

Optimization of the Phosphorus Doped BSF Doping Profile and Formation Method for N-type Bifacial Solar Cells

  • Cui, Jian;Ahn, Shihyun;Balaji, Nagarajan;Park, Cheolmin;Yi, Junsin
    • Current Photovoltaic Research
    • /
    • 제4권2호
    • /
    • pp.31-41
    • /
    • 2016
  • n-type PERT (passivated emitter, rear totally diffused) bifacial solar cells with boron and phosphorus diffusion as p+ emitter and n+ BSF (back surface field) have attracted significant research interest recently. In this work, the influences of wafer thickness, bulk lifetime, emitter, BSF on the photovoltaic characteristics of solar cells are discussed. The performance of the solar cell is determined by using one-dimensional solar cell simulation software PC1D. The simulation results show that the key role of the BSF is to decrease the surface doping concentration reducing the recombination and thus, increasing the cell efficiency. A lightly phosphorus doped BSF (LD BSF) was experimentally optimized to get low surface dopant concentration for n type bifacial solar cells. Pre-oxidation combined with a multi-plateau drive-in, using limited source diffusion was carried out before pre-deposition. It could reduce the surface dopant concentration with minimal impact on the sheet resistance.

Service Innovation of 3/2 Star Hotel in Bandung

  • Lestari, Yuliani Dwi;Laode, M.I.
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제5권3호
    • /
    • pp.73-80
    • /
    • 2018
  • The growth of Bandung's tourism industry has had a massive impact on the hotel sector. Most tourists visiting Bandung are domestic tourists and tend to be modest spenders fitting the profile of a mid-market (2/3 star) hotel guest. As competition has increased mid-market hotels have come under pressure from upmarket (4/5 star) and budget hotels committed to cutting prices. There is also competition with the mid-market hotel sector, which means that the 2/3 star hotels have to keep innovating in order to remain competitive. This study uses the Service Quality framework to describe customer expectations and identify gaps in hotel services. A questionnaire survey of 105 local tourists who had stayed in 2/3 star hotels in Bandung showed that the most important dimension is responsiveness, following by reliability, assurance, tangibles and empathy. Thus we conclude that local tourists' primary expectations are that hotels will deliver the service they have promised, be responsive to guests' needs and comply with service standards. Furthermore, these findings validate the earlier prediction that comparing 2/3 star hotel with 5/4 start hotel, the customers are having preliminary knowledge on facilities limitation and friendliness. Tourists using 2/3 star hotels tend to be prepared to accept limited facilities and less friendly staff service.