1 |
Kim, D.K., Ng, W.C.K., Hwang, O.J., Sohn, J.M. and Lee, E.B. (2018b), "Recommended finite element formulations for the analysis of offshore blast walls in an explosion", Lat. Am. J. Sol. Struct., 15(10), 1-32.
|
2 |
Kim, D.K., Poh, B.Y., Lee, J.R. and Paik, J.K. (2018c), "Ultimate strength of initially deflected plate under longitudinal compression: Part I=An advanced empirical formulation", Struct. Eng. Mech., Accepted.
|
3 |
Kim, D.K., Wong, E.W.C., Lee, E.B., Yu, S.Y. and Kim, Y.T. (2018d), "A method for the empirical formulation of current profile", Ships and Offshore Structures, In Press, .
DOI
|
4 |
Koh, B.C. and Kikuchi, N. (1987), "New improved hourglass control for bilinear and trilinear elements in anisotropic linear elasticity", Comp. Meth. Appl. Mech. Eng., 65(1), 1-46.
DOI
|
5 |
Lei, H.Y., Lee, J.C., Li, C.B., Ha, Y.C., Seo, J.K., Kim, B.J. and Paik, J.K. (2015), "Cost-benefit analysis of corrugated blast walls", Ships Offshore Struct., 10(5), 565-574.
|
6 |
Liang, Y.H., Louca, L.A. and Hobbs, R.E. (2006), "A simplified method in the static plastic analysis of corrugated steel panels", J. Strain Analy. Eng. Des., 41(2), 135-149.
DOI
|
7 |
Liao, J.J. and Ma, G. (2018), "Energy absorption of the ring stiffened tubes and the application in blast wall design", Struct. Eng. Mech., 66(6), 713-727.
DOI
|
8 |
Lin, Y.T. (1985), "Structural longitudinal ship modelling", Ph.D. Dissertation, University of Glasgow, Scotland, U.K.
|
9 |
Louca, L.A., Boh, J.W. and Choo, Y.S. (2004), "Design and analysis of stainless steel profiled blast barriers", J. Constr. Steel Res., 60(12), 1699-1723.
DOI
|
10 |
Louca, L.A. and Fallah, A.S. (2010), Chapter 10-The Use of Composites in Blast-Resistant Walls, In N. Uddin (Ed.), Blast Protection of Civil Infrastructures and Vehicles Using Composites, Woodhead Publishing, Cambridge, U.K.
|
11 |
Macneal, R.H. and Harder, R.L. (1985), "A proposed standard set of problems to test finite element accuracy", Fin. Elem. Analy. Des., 1(1), 3-20.
DOI
|
12 |
Mohd Hairil, M., Kim, D.K., Kim, D.W. and Paik, J.K. (2014), "A time-variant corrosion wastage model for subsea gas pipelines", Ships Offshore Struct., 9(2), 161-176.
DOI
|
13 |
Paik, J.K., Kim, D.K., Park, D.H., Kim, H.B., Mansour, A.E. and Caldwell, J.B. (2013), "Modified Paik-Mansour formula for ultimate strength calculations of ship hulls", Ships Offshore Struct., 8(3-4), 245-260.
DOI
|
14 |
OILPRICE (2018), U.S. Shale Oil Production Rises at Record-Breaking Rate, .
|
15 |
Paik, J.K. and Kim, D.K. (2012), "Advanced method for the development of an empirical model to predict time-dependent corrosion wastage", Corros. Sci., 63, 51-58.
DOI
|
16 |
Paik, J.K. and Mansour, A.E. (1995), "A simple formulation for predicting the ultimate strength of ships", J. Mar. Sci. Technol., 1(1), 52-62.
DOI
|
17 |
Paik, J.K. and Thayamballi, A.K. (1997), "An empirical formulation for predicting the ultimate compressive strength of stiffened panels", Proceedings of the 7th International Offshore and Polar Engineering Conference (ISOPE 1997), Honolulu, U.S.A., May.
|
18 |
Paik, J.K., Kim, D.K., Park, D.H., Kim, H.B. and Kim, M.S. (2012), "A new method for assessing the safety of ships damaged by grounding", Int. J. Maritime Eng., 154(A1), 1-20.
|
19 |
Paik, J.K., Thayamballi, A.K. and Chun, M.S. (1997), "Theoretical and experimental study on the ultimate strength of corrugated bulkheads", J. Ship Res., 41(4), 301-317.
|
20 |
Paik, J.K., Thayamballi, A.K. and Lee, J.M. (2004), "Effect of initial deflection shape on the ultimate strength behavior of welded steel plates under biaxial compressive loads", J. Ship Res., 48(1), 45-60.
|
21 |
Pan, Y. and Louca, L.A. (1999), "Experimental and numerical studies on the response of stiffened plates subjected to gas explosions", J. Constr. Steel Res., 52(2), 171-193.
DOI
|
22 |
Smith, C.S., Davidson, P.C., Chapman, J.C. and Dowling, P.J. (1988), "Strength and stiffness of ship's plating under in-plane compression and tension", Tran RINA, 130, 277-296.
|
23 |
Park, B.W. and Cho, S.R. (2006), "Simple design formulae for predicting the residual damage of unstiffened and stiffened plates under explosion loadings", Int. J. Imp. Eng., 32(10), 1721-1736.
DOI
|
24 |
Schleyer, G.K. and Langdon, G.S. (2003), Research Report 124: Pulse Pressure Testing of 1/4 Scale Blast Wall Panels with Connections: Phase I, Health and Safety Executive (HSE), London, U.K.
|
25 |
Schleyer, G.K. and Langdon, G.S. (2006), Research Report 404: Pulse Pressure Testing of 1/4 Scale Blast Wall Panels with Connections: Phase II, Health and Safety Executive (HSE), London, U.K.
|
26 |
Schwer, L.E., Key, S.W., Pucik, T.A. and Bindeman, L.P. (2005), "An assessment of the LS-DYNA hourglass formulations via the 3D patch test", Proceedings of the 5th European LS-DYNA Users Conference, Birmingham, U.K., May.
|
27 |
Seo, J.H., Kim, D.K., Choi, H.S., Yu, S.Y. and Park, K.S. (2018), "Simplified technique for predicting offshore pipeline expansion", J. Mar. Sci. Appl., 17(1), 68-78.
DOI
|
28 |
Sohn, J.M., Kim, S.J., Seo, J.K., Kim, B.J. and Paik, J.K. (2016), "Strength assessment of stiffened blast walls in offshore installations under explosions", Ships Offshore Struct., 11(5), 551-560.
DOI
|
29 |
Sohn, J.M., Kim, S.J., Seong, D.J., Kim, B.J., Ha, Y.C., Seo, J.K. and Paik, J.K. (2014), "Structural impact response characteristics of an explosion resistant profiled blast walls in arctic conditions", Struct. Eng. Mech., 51(5), 755-771.
DOI
|
30 |
STEO (2018), Independent Statistics & Analysis by U.S. Energy Information Administration, Short-Term Energy Outlook, Washington, U.S.A., .
|
31 |
Caldwell, J.B. (1955), "The strength of corrugated plating for ships bulkheads", Tran RINA, 97, 495-522.
|
32 |
Biggs, J.M. (1964), Introduction to Structural Dynamics, McGraw-Hill Companies, New York, U.S.A.
|
33 |
Boh, J., Choo, Y. and Louca L. (2004), "Design and numerical assessment of blast walls subjected to hydrocarbon explosions", Proceedings of the the 14th International Offshore and Polar Engineering Conference (ISOPE 2004), Toulon, France, May.
|
34 |
Brewerton, R. (1999), Technical Note 5: Design Guide for Stainless Steel Blast Walls, Fire and Blast Information Group (FABIG), Berkshire, U.K.
|
35 |
Cui, W. and Mansour, A.E. (1998), "Effects of welding distortions and residual stresses on the ultimate strength of long rectangular plates under uniaxial compression", Mar. Struct., 11(6), 251-269.
DOI
|
36 |
Sun, E.Q. (2006), "Shear locking and hourglassing in MSC Nastran, ABAQUS, and ANSYS", Proceedings of the MSC Software Corporation's 2006 Americas Virtual Product Development Conference, Detroit, Michigan, U.S.A.
|
37 |
Ueda, Y., Yao, T., Nakacho, K. and Yuan, M.G. (1992), Prediction of Welding Residual Stress, Deformation and Ultimate Strength of Plate Panels, Engineering Design in Welded Constructions, Pergamon Press, Oxford, U.K.
|
38 |
Zhang, S.M. and Khan, I. (2009), "Buckling and ultimate capability of plates and stiffened panels in axial compression", Mar. Struct., 22(4), 791-808.
DOI
|
39 |
Caldwell, J.B. (1965), "Ultimate longitudinal strength", Tran RINA, 107, 411-430.
|
40 |
Cormie, D., Mays, G. and Smith, P. (2009), Blast Effects on Buildings, 2nd Edition, ICE Publishing, London, U.K.
|
41 |
DNV (2010), Recommended Practice (RP-C204), Design Against Accidental Loads, Det Norske Veritas, Oslo, Norway.
|
42 |
Kim, D.K. and Lim, H.L. (2018), "Ultimate strength assessment of a stiffened panel by developing a refined empirical formulation", Eng. Struct., Under Revision.
|
43 |
Kim, D.K., Incecik, A., Choi, H.S., Wong, E.W.C., Yu, S.Y. and Park, K.S. (2018a), "A simplified method to predict fatigue damage of offshore riser subjected to vortex-induced vibration by adopting current index concept", Ocean Eng., 157, 401-411.
DOI
|
44 |
Kim, D.K., Kim, B.J., Seo, J.K., Kim, H.B., Zhang, X.M. and Paik, J.K. (2014), "Time-dependent residual ultimate longitudinal strength-grounding damage index (RD) diagram", Ocean Eng., 76, 163-171.
DOI
|
45 |
Kim, D.K., Lim, H.L., Kim, M.S., Hwang, O.J. and Park, K.S. (2017), "An empirical formulation for predicting the ultimate strength of stiffened panels subjected to longitudinal compression", Ocean Eng., 140, 270-280.
DOI
|