• KEPCO Journal on Electric Power and Energy
• /
• 제8권1호
• /
• pp.31-36
• /
• 2022

This paper presents the measuring process of dynamic properties of offshore wind power foundation and provides consideration of each step. This Guideline enables to maintain consistent measuring procedure and therefore increase the reliability of test results. Small scaled suction bucket foundation was fabricated to represent the commercial support structure installation mechanism and two cases(free-free, free-fixed) of dynamic tests were performed at workshop. From the tests, the importance of dynamic properties of connection part between suction bucket and tower was figured out. More over, types and configuration of measuring devices are recommended which can help find the natural frequency of wind turbine foundation correctly. In field test, it was found that the natural frequency of suction bucket foundation was increased linearly with the penetration depth due to the confining effect of ambient soil. Meanwhile, it was not easy to get an enough excitation force with normal impact hammer because the N.F of suction bucket model was in the lower range of 0 Hz ~ 5 Hz. Therefore, new excitation method which has enough force and can excite lower frequency range was devised. This study will help develop safety check procedure of suction bucket foundation in field at each installation stage using the N.F measurement.

• Smart Structures and Systems
• /
• 제29권3호
• /
• pp.445-455
• /
• 2022

Steel anchor bolts are installed in concrete using a variety of methods. One of the most common methods of anchor bolt installation is using epoxy resin as an infill material injected into the drilled hole to act as a bonding material between the steel bolt and the surrounding concrete. Typical design standards assume uniform stress distribution along the length of the anchor bolt accompanied with single crack leading to pull-out failure. Experimental evidence has shown that the steel anchor bolts fail owing to the multiple failure patterns, hence these design assumptions are not realistic. In this regard, the presented research work details the analytical model that takes into consideration multiple micro cracks in the infill material induced via impact loading. The impact loading from the Schmidt hammer is used to evaluate the bond condition bond condition of anchor bolt and the epoxy material. The added advantage of the presented analytical model is that it is able to take into account the various type of end conditions of the anchor bolts such as bent or U-shaped anchors. Through sensitivity analysis the optimum stiffness and shear strength properties of the epoxy infill material is achieved, which have shown to achieve lower displacement coupled with reduced damage to the surrounding concrete. The accuracy of the presented model is confirmed by comparing the simulated deformational responses with the experimental evidence. From the comparison it was found that the model was successful in simulating the experimental results. The proposed model can be adopted by professionals interested in predicting and controlling the deformational response of anchor bolts.

• 대한기계학회논문집B
• /
• 제35권5호
• /
• pp.513-516
• /
• 2011

소형 풍력발전기 날개의 동적 거동에 대한 실험적 연구를 수행하였다. 날개를 따라 배열된 광 브레그 격자 (Fiber Bragg Grating) 센서를 이용하여 날개 표면에서의 변형률(strain)을 측정하였다. 충격 햄머 실험 (Impact Hammer Test)을 통하여, 1차 및 고차 모드의 공진주파수를 측정하였다. 광섬유 센서를 이용한 실험결과를 스트레인 게이지를 이용한 실험 결과와 비교한 결과 모드 주파수는 매우 유사하였다. 하지만, 광섬유 센서의 경우 스트레인 게이지에서 감지하지 못하는 모드를 감지할 수 있었다. 또한, 실험으로부터 얻은 변형률 모드를 이용하여 근사적으로 날개의 변위 모드를 추정하였다.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4146-4158
• /
• 2022

Ultra-high performance concrete (UHPC) has been widely utilized in military and civil protective structures to resist intensive loadings attributed to its excellent properties, e.g., high tensile/compressive strength, high dynamic toughness and impact resistance. At present, aiming to improve the defects of the traditional vertical concrete cask (VCC), i.e., the external storage facility of spent fuel, with normal strength concrete (NSC) shield, e.g., heavy weight and difficult to fabricate/transform, the feasibility of UHPC applied in the shield of VCC is numerically examined considering its high radiation and corrosion resistance. Firstly, the finite element (FE) analyses approach and material model parameters of NSC and UHPC are verified based on the 1/3 scaled VCC tip-over test and drop hammer test on UHPC members, respectively. Then, the refined FE model of prototypical VCC is established and utilized to examine its dynamic behaviors and damage distribution in accidental tip-over and end-drop events, in which the various influential factors, e.g., UHPC shield thickness, concrete ground thickness, and sealing methods of steel container are considered. In conclusion, by quantitatively evaluating the safety of VCC in terms of the shield damage and vibrations, it is found that adopting the 300 mm-thick UHPC shield instead of the conventional 650 mm-thick NSC shield can reduce about 1/3 of the total weight of VCC, i.e., about 50 t, and 37% floor space, as well as guarantee the structural integrity of VCC during the accidental drop simultaneously. Besides, based on the parametric analyses, the thickness of concrete ground in the VCC storage site is recommended as less than 500 mm, and the welded connection is recommended for the sealing method of steel containers.

• 대한금속재료학회지
• /
• 제48권8호
• /
• pp.705-716
• /
• 2010

Effects of specimen thickness and notch shape on fracture mode appearing in drop weight tear test (DWTT) specimens of API X70 and X80 linepipe steels were investigated. Detailed microstructural analysis of fractured DWTT specimens showed that the fractures were initiated in normal cleavage mode near the specimen notch, and that some separations were observed at the center of the fracture surfaces. The Chevron-notch (CN) DWTT specimens had broader normal cleavage surfaces than the pressed-notch (PN) DWTT specimens. Larger inverse fracture surfaces appeared in the PN DWTT specimens because of the higher fracture initiation energy at the notch and the higher strain hardening in the hammer-impacted region. The number and length of separations were larger in the CN DWTT specimens than in the PN DWTT specimens, and increased with increasing specimen thickness due to the plane strain condition effect. As the test temperature decreased, the tendency to separations increased, but separations were not found when the cleavage fracture prevailed at very low temperatures. The DWTT test results, such as upper shelf energy and energy transition temperature, were discussed in relation with microstructures and fracture modes including cleavage fracture, shear fracture, inverse fracture, and separations.

• 대한토목학회논문집
• /
• 제30권6A호
• /
• pp.535-542
• /
• 2010

철도교량과 같이 주기적 가진에 의해 공진발생의 가능성이 높은 구조물에 있어서, 정확한 구조물의 동적특성치 파악은 설계단계 및 공용중 안정적인 응답을 확보하기 위해 필수적이다. 이 논문에서는 실축척 구조물을 대상으로 하는 강제 진동실험에서 일반적으로 사용할 수 있는 가진방법인 가진기 및 충격해머를 사용한 가진실험의 결과를 상호 비교하여 가진방법에 따른 고유진동수 추출결과의 차이 및 차이의 발생원인을 분석하고, 보다 정확한 구조물의 고유진동수를 산출하기 위한 보정방법을 제안하였다. 또한, 철도교량의 시공단계에 따라 궤도부설 전, 후에 진동실험을 수행하였으며, 궤도부설에 의한 고유진동수 변화를 관찰하였다. 가진방법에 따른 측정 고유진동수의 차이는 가진기의 경우 부가질량의 효과, 충격해머의 경우 동적응답 레벨에 따라 변화하는 지점강성효과에 기인하는 것으로 파악되었으며, 이에 대한 보정을 통해 보다 신뢰성 높은 고유진동수로 환산하는 것이 가능하였다. 궤도부설의 효과는 일반적으로 부가질량으로만 고려하여 궤도부설 전에 비해 고유진동수가 감소하는 것으로 예상되어 왔지만, 이 연구에서 수행한 실험의 결과로 질량추가의 효과에 상당하는 강성기여 효과도 있는 것으로 나타났으며, 강성증가율은 발생변위의 수준에 비례하여 증가하는 것으로 나타났다. 따라서, 설계단계에서 완성계의 고유진동수 예측시 궤도의 발생변위수준을 고려하여 적절히 강성기여 효과를 고려하는 것이 필요할 것으로 판단된다.

• 한국전산구조공학회논문집
• /
• 제28권6호
• /
• pp.607-614
• /
• 2015

본 논문에서는 전통 목조건축물로 되어 있는 대한민국의 국보 1호인 숭례문의 구조해석을 수행하고 안전도를 평가하였다. 전통 목조건축의 대부분의 하중을 차지하고 있는 숭례문의 지붕하중을 상세히 산정하고 숭례문의 가구구성 특징을 면밀히 살펴 범용 구조해석 소프트웨어인 midas Gen으로 구조해석모델을 구축하였다. 수직하중에 대한 정적구조해석을 수행하고 주요 수직 수평 구조부재의 안전성과 주요 수평부재의 사용성을 평가하였다. 숭례문의 동적거동특성을 평가하기 위하여 현장에서의 충격해머실험과 구조해석 소프트웨어를 이용한 고유치해석을 수행하고 그 결과를 비교하고 주요모드를 도출하였다. 수직하중에 대한 검토결과 숭례문은 구조적 능력에 여유가 있는 것으로 나타났다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권4호
• /
• pp.243-247
• /
• 2014

The Spinal cage is the cage-shaped implantable medical device used to treat structural abnormalities caused by degenerative intervertebral disks. In order to secure enough space to provide the mechanical stability and the intervertebral fusion, after removing the intervertebral disc, the Spinal cage is transplanted between the intervertebral space. A hammer is used to push the spinal cage into a narrow space during the spinal cage transplant surgery. Due to the impact and pressure, damage occurs frequently on the spinal cage. In this study, a test model is constructed to measure the value of impulse generally applied on the Spinal cage. The figures of internal impulse before and after the improvement of the Spinal cage are then compared to suggest direction to improve the reliability of the spinal cage.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.223-229
• /
• 2014

In this paper, the natural frequency and damping ratio are analyzed with the acceleration signal of an Euler-Bernoulli beam using the impact hammer test. The results are presented according to crack depth and position using the recursive least squares method. The results are compared and investigated with FEM analysis of CATIA. Both methods agree well with each other regarding the natural mode characteristics. The captured acceleration can be used for the calculation of the natural frequency and damping ratio using time series methods that are based on the measured acceleration. Using these data, a recursive time series model with the acceleration signal was configured and the behaviors of the natural frequency and damping ratio were investigated and analyzed. Finally, the results can be used for the prediction of crack position and depth under different crack conditions for an Euler-Bernoulli beam.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.186-194
• /
• 2004

Experiments were conducted to determine the structural static and dynamic characteristics of air foil bearings. The housing of the bearing on the journal was driven by an impact hammer which was used to simulate dynamic forces acting on the bump loll with various leading condition. Two different bump foils (Cu-coated bump and viscoelastic bump) were tested and the static and dynamic coefficients of two bump foils compared, based on the experimental measurements for a wide range of operating conditions. The static and dynamic characteristics of air foil bearings were extracted 0rpm the frequency response function by least square method and IV(Instrumental Variable) method. The experiment was tested at 0rpm and $10,000\~16,000rpm$, and loaded on $50\~150N$. From the test results, the possibility of the application of high load and high speed condition is suggested.