• Title/Summary/Keyword: Immersion Method

Search Result 627, Processing Time 0.029 seconds

Strength Characteristics of the Soil Mixed with a Natural Stabilizer (친환경 토양안정재를 혼합한 지반의 강도특성)

  • Kwon, Youngcheul;Oh, Sewook
    • Journal of the Korean GEO-environmental Society
    • /
    • v.13 no.1
    • /
    • pp.45-51
    • /
    • 2012
  • This article aims to find method to mix a harmless hardening agent and soil generated during construction to make paving materials. The main purpose of this research is to get rid of the harmfulness(Chromium (VI), etc.) of cement which has been generally and frequently used as a hardening agent and strengthen it so that it can be used for the general foundation solidification and stabilization of civil engineering/construction structures such as dredging soil treatment, marine structure foundation treatment, surface soil stabilization, and river bank erosion prevention. NSS(Natural Stabilizer Soil) used for this study takes as its chief ingredient the mixture of lime and staple fibers extracted from natural fibers. It increases the shearing strength of soil that it improves the support and durability of the foundation and prevents flooding and frost as well. The pH measured to know its eco-friendliness was 6.67~7.15, and according to the migration testing, only Pb and CN were lower than the standards, so it can be said that NSS has almost no harmful components in it. According to the result of uniaxial strength testing, when the mixture ratio of weathered soil to NSS was 6%, about 1,850kpa strength was expressed. And according to the result of CBR. testing to figure out its appropriateness as a paving material, the CBR of the foundation was 4%~6%. But when the mixture ratio of NSS is over 6%, the water immersion CBR. is over 100%; thus, it is expected that it will show great utility as a paving material.

Influence of Temperature on Chloride Ion Diffusion of Concrete (콘크리트의 염화물이온 확산성상에 미치는 온도의 영향)

  • So, Hyoung-Seok;Choi, Seung-Hoon;Seo, Chung-Seok;Seo, Ki-Seog;So, Seung-Young
    • Journal of the Korea Concrete Institute
    • /
    • v.26 no.1
    • /
    • pp.71-78
    • /
    • 2014
  • The long term integrity of concrete cask is very important for spent nuclear fuel dry storage system. However, there are serious concerns about early deterioration of concrete cask from creaking and corrosion of reinforcing steel by chloride ion because the cask is usually located in seaside, expecially by combined deterioration such as chloride ion and heat, carbonation. This study is to investigate the relation between temperature and chloride ion diffusion of concrete. Immersion tests using 3.5% NaCl solution that were controlled in four level of temperature, i.e. 20, 40, 65, and $90^{\circ}C$, were conducted for four months. The chloride ion diffusion coefficient of concrete was predicted based on the results of profiles of Cl- ion concentration with the depth direction of concrete specimens using the method of potentiometric titration by $AgNO_3$. Test results indicate that the diffusion coefficient of chloride ion increases remarkably with increasing temperature, and there was a linear relation between the natural logarithm values of the diffusion coefficients and the reciprocal of the temperature from the Arrhenius plots. Activation energy of concrete in this study was about 46.6 (W/C = 40%), 41.7 (W/C = 50%), 30.7 (W/C = 60%) kJ/mol under a temperature of up to $90^{\circ}C$, and concrete with lower water-cement ratio has a tendency towards having higher temperature dependency.

Concept Mapping Analyzing on Counselors' Vicarious Trauma Experience from Working with Victims of Sexual Violence (성폭력 상담자 대리외상 경험에 대한 개념도 연구)

  • Heo, Chan-hee;Lee, Jee-yon
    • The Journal of the Korea Contents Association
    • /
    • v.20 no.11
    • /
    • pp.457-471
    • /
    • 2020
  • The purpose of this study is to explore the in-depth content of vicarious trauma experience of sexual violence counselors and to develop intervention strategy. To this end, depth interviews were conducted with twelve sexual violence counselors working at the sexual violence counseling site for more than three years. In addition, using the concept mapping method, the content exploration of the experience of vicarious trauma of sexual violence counselors was confirmed, and its conceptual structure was identified. As a result, 60 key sentences regarding the experience of vicarious trauma of sexual violence counselors were extracted. Then, multi-dimensional scale and cluster analysis were conducted after making nineteen appraisal participants who are under the same condition as depth interview participants to categorize and assess key sentences. As a result of analysis, the x-axis of negative perception, psychological and emotional dimension, and the y-axis of personal inner and behavioral dimension appeared, and five clusters emerged: immersion and skepticism about work, experience of emotional assimilation, hypersensitivity to sex, increased vigilance against men, and threat of safety. This provided basic data that could categorize and identify the contents of vicarious trauma of sexual violence counselors experience by sexual violence counselors.

COMPARISON OF THE PHYSICAL PROPERTIES OF FOUR KINDS OF ACRYLIC RESIN DENTURE TEETH (4종 아크릴릭 레진 인공치의 물리적 성질에 관한 비교)

  • Hwang, Jong-Woo;Chung, Chae-Heon;Ko, Yeong-Mu
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.33 no.2
    • /
    • pp.210-230
    • /
    • 1995
  • To compare the wear resistance of four kinds of commercial acrylic resin teeth [SR-Orthosit PosterioresR(Ivoclar Co., Liechtenstein), Endura PosteriorR(Shofu Inc. Japan), trubyte IPN teethR(Dentsply International Inc., York,), Trubyte BiotoneR(dentsply Inermational Inc. Brazil) by means of the toothbrush abrasion method, the artificial resin teeth were embedded in epoxy resin with the occlusal surfaces aligned in one plane for a total of 40 blocks. There after, each lock was mounted in the arm of the toothbrush abrasion machine(K 236, Japan). Wear measurements were made on the three preconditioned states. Those were as follows : no treatment specimens, thermocycled specimens, and thermocycled specimens which were immeresed applied load of 400g during the buring the brushing cycle. At the end of the 30,000-stroke cycle, each specimen was removed, and weighed. The microhardness of four kinds of commercial resin teeth were determined by means of microhardness tester. Microhardness tests were performed on te no treatment specimens, thermocycled specimens, and thermocycled specimens with immersion in the denture cleansing solution. Finally, the comparison of thermal properties were perfomed using differential scanning calorimeter(DSC-1500). The following results were obtained : 1. In the case of no treatment teeth, the wear amount of endura Posterior(EN) was the greatest among the others(p<0.01), and the wear amount of three kinds of artificial resin teeth was increased in the order of Trubyte IPN teeth(IN), Trubyte Biotone(BN), SR-Orthosit Posteriores(SN) but there was no statistic significance(p>0.01). 2. The wear amount of Trubyte IPN teeth(IT) and Trubyte Biotone(BT), was increased due to thermocycling effect, but that of Endura Posteriores(ET) was decreased conversely(p<0.01). 3. Except for the SR-Orthosit Posteriores(STC), the wear amount of three kinds of artificial resing teeth(that is, ETC, ITC, BTC) was increased due to denture cleansing solution$(Cledent^R)$, but there was no statistic significance(p>0.01). But the wear amount of the SR-Orthosit Posteriores(STC) was the greatest among the others(p<0.01). 4. The wear amount of toothbrush was the greatest in case of contact with occlusal surface of SROrthosit Posteriores resin teeth(p<0.01). 5. the microhardness values(KHN) of the SR-Orthosit Posteriores was the highest among the experimental artificial resin teeth(p<0.01). 6. There was no relationship between microhardness valuse(KHN) and wear amount of four kinds of experimental artificial resin teeth(p<0.01). 7. The differential canning calorimetric property of four kinds of artificial resin teeth did not show endothermal or exothermal peak in the range of $100^{\circ}C$

  • PDF

Preparation of $PES-TiO_2$ Hybrid Membranes and Evaluation of Membrane Properties ($PES-TiO_2$ 복합막의 제조 및 막 특성 평가)

  • Youm, Kyung-Ho;Lee, Mi-Sheon
    • Membrane Journal
    • /
    • v.17 no.3
    • /
    • pp.219-232
    • /
    • 2007
  • The polyethersulfone(PES)-titanium oxide($TiO_2$) hybrid membranes were prepared by immersion precipitation phase inversion method. The casting solution for the preparation of $PES-TiO_2$ hybrid membrane was provided by adding $TiO_2$ nano particles into the basis polymer solution of 14 wt% and 20 wt% PES/N-methyl-2-pyrrolidone(NMP). The $TiO_2$ loading [wt% ($TiO_2/NMP$)] in eating solution was varied from 0 to 60 wt%. Membrane performance and morphological change of the resulting $PES-TiO_2$ hybrid membranes were discussed in aspect of $TiO_2$ loading, by viscosity, coagulation value and light transmittance of the casting solution, measurement of tensile strength, pore size and contact angle, surface and cross sectional SEM images of the hybrid membrane, and ultrafiltration experiments using the hybrid membrane. According as increase of $TiO_2$ loading in the casting solution, viscosity is increased and coagulation value becomes lower, therefore the thermodynamic instability of the casting solution is increased. It is found that when $TiO_2$ loading is increased, 1) precipitation rate becomes faster while instantaneous demixing is maintained, 2) pure water flux, membrane pore size and compaction stability of the resulting membranes are increased, 3) tensile strength and contact angle are decreased. Dead-end ultrafiltration of bovine serum albumin(BSA) solution using the hybrid membrane shows that membrane performance(flux of BSA solution) enhanced up to 7 times compared with the results obtained using the pure PES membrane(not containing $TiO_2$ particle), due to the increase of hydrophilicity.

The relationship between learning motivation, learning commitment and academic achievement of nursing students who gave non-face-to-face online lectures (비대면 온라인 강의를 경험한 간호대학생들의 학습동기, 학습몰입 및 학업성취도의 관계)

  • Lee, Jung-Geun;Kim, Won Jong;Lee, Jae Kyeum
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.11
    • /
    • pp.412-419
    • /
    • 2020
  • This study investigates the relationships among learning motivation, learning immersion, and academic achievement in college-level nursing students who give non-face-to-face online lectures. The data for this study were collected using questionnaires given to 147 students attending four-year nursing colleges at two universities. For the data analysis method, descriptive statistics, t-test, ANOVA, the Scheffe test, Pearson's correlation analysis, and multiple regression analysis were used. As a result of the study, the average motivation was 101.29±12.18 points, learning commitment was 72.02±8.03 points, and academic achievement was 31.31±4.06 points. The relationships among learning motivation, learning commitment, and adaptation to college life showed significant positive correlations. In the results of multiple regression analysis, factors influencing the academic achievements of nursing students were found to be learning motivation and learning commitment. Therefore, in order to increase academic achievement in nursing college students, it is necessary to develop a specific strategy to improve learning motivation and to develop various activities and programs to immerse students in learning.

Surface Characteristics and Antifouling Performance of Inorganic MnOx-WO3-TiO2 Nanopowder for Self-polishing Copolymer Paint Applications (무기계 MnOx-WO3-TiO2 나노분말의 표면특성 및 자기마모형 수지 적용성 평가)

  • Shin, Byeongkil;Park, Hyun
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.22 no.2
    • /
    • pp.253-258
    • /
    • 2016
  • The $MnO_x-WO_3-TiO_2$ nanoscale powders were synthesized by sol-gel method in order to prevent the biological fouling on the ships and offshore structures. Powder characteristics and antifouling performance were investigated with respect to the crystalline, microstructure and surface property for application in self-polishing copolymer resins. The high antifouling activity of $TiO_2$-system biocide was attributed to its redox potential and soluble metal ions originating from tungsten oxides according to the improvements in the powder characteristics. Based on their physio-chemical characterizations, the specific surface areas of powders were about $90m^2/g$ and the grain size was in the region 100 ~ 150 nm. Powder characteristics and surface properties were improved by the addition of $WO_3$. Antifouling performance were analyzed according to their surface properties and static immersion tests to determine the effects of the $TiO_2$-system compounds. The surface of 2 wt. % added sample was clean for 5 month. This may be attributed to the ability of $MnO_x-WO_3-TiO_2$ powders to act as a promoter in antifouling agents.

A Research on Addictive Use of Smartphone by University Students (대학생의 스마트폰 중독적 사용 경험 연구)

  • Ko, Ki-Sook;Lee, Myoun-Jae;Kim, Young-Eun
    • Journal of Digital Contents Society
    • /
    • v.13 no.4
    • /
    • pp.501-516
    • /
    • 2012
  • The purpose of this study is to explore the fundamental nature and meanings of the experiences of university students with regard to their smartphone usage in order to prevent smartphone addiction and provide guidelines to develop effective interventions. Nine university students who were currently enrolled in an university located in a Korean province participated in this study. In-depth interviews were conducted from June of 2012 to July of 2012, and data were analyzed using Colaizzi's phenomenological qualitative method. As a results, five theme and 40 subthemes of experiences of problematic smartphone usage were identified. Those themes include 1) a desperate try to connect with others(exposing oneself without appropriate self-protection, seeking emotional comfort, hurt and mistrust); 2) excessive use of smartphone and loss of self-control(more smartphone usage over computer/over-immersion/excessive usage/habituation, loss of self-control); 3) psychological difficulties(excessive attachment and dependence, separation anxiety, clingingness, reduced patience) ; 4) threats to daily functioning (changes in priorities, regressed independent daily functioning, irregular daily patterns, health problems, interruptions from free messenger, academic difficulties); 5) potential for recovery(conflictual feelings and doubts over smartphone usage, importance of interpersonal(face-to-face) communications, willingness to cut down the use, hope for recovery). This study provided suggestions for the prevention effort against smartphone addiction.

Influence of cadmium exposure on the immune response of olive flounder, Paralichthys olivaceus (Cadmium이 넙치(Paralichthys olivaceus)의 면역 반응에 미치는 영향)

  • Byun, Ju-Young;Yoo, Min-Ho;Jun, Lyu-Jin;Lee, Hyung-Ho;Jeong, Hyun-Do
    • Journal of fish pathology
    • /
    • v.14 no.2
    • /
    • pp.97-102
    • /
    • 2001
  • Olive flounder, Paralichthys olivaceus known as an one of the major aquacultured species in Korea were exposed to cadmium(Cd) with different protocols and analyzed the effects of exposure on the immune response. Antibody levels in sera of the group exposed to Cd(20ppb) by immersion method from 2 weeks before immuniztion with formalinised Edwardsiella tarda(E. tarda) KFE entigen to the end of experiment reached to peak level faster than that of the non-exposed group. After this peaking time the levels decreased much at a faster rate compared to the non-exposed group. This tendency was also appeared in the numbers of specific antibody secreting cells(SASC) analyzed with the enzyme-linked immunospot (ELISPOT)-assay technique in the splenocytes of the experimental groups exposed to Cd with different ways. Interestingly, the group exposed to Cd for 2 weeks before immunization also showed increased numbers of SASC unlikely the antibody production and suggested a more critical influence of cadmium exposure in early stage of immune reaction. Artificial infection with live E. tarda KFE induces 100% mortality in the flounder exposed to cadmium throughout the experimental period from two weeks before the immunization. It may imply that some other factors related to specific immunity are involving in the defence system of flounder exposed to Cd. Taked together. Cd exposure may induce temporaily stimulatory or indhibitory effects on the immune reaction, but suppress the physiological systems for the resistant against the infective agents with other toxic effects.

  • PDF

A Study on Corrosion Resistance of the Reinforement in Concrete Using Blast-Furnace Slag Powder (고로슬래그미분말을 사용한 콘크리트의 염화물이온에 의한 철근부식 저항성 연구)

  • Kim Eun-Kyun;Kim Jin-Keun;Lee Dong-Hyuk;Kim Young-Ung;Kim Yong-Chul
    • Journal of the Korea Concrete Institute
    • /
    • v.16 no.1 s.79
    • /
    • pp.1-9
    • /
    • 2004
  • This paper represents the permeability of chloride ions and the corrosion performance in the concrete blended with granulate blast furnace slag exposed to chloride environment. An ordinary cement (type I ) and sulfate resisting cement(type V) were used for the experiment. The two cements were combined with $0\%$, $25 \%$, $40\%$, and $55\%$ of the granulated blast furnace slag. The accelerated permeability tests of chloride ions were performed in accordance with ASTM C1202, and the accelerated corrosion tests of steel were carried out by using the method of immersion/drying cycles. After water curing 28 days, 56 days and 91 days, these tests were conducted until 30 cycles. In every cycle, test specimens were wetted in $3\%$ NaCl solution for three days and dried again in $60^{\circ}C$ air for four days. As an experimental results, the diffusion coefficient of chloride ions of the ordinary cement Concrete Combined granulated blast furnace slag was much lower than that of non granulated blast furnace slag concrete. Moreover, the diffusion coefficient of chloride ions of sulfate resisting cement concrete was higher than that of ordinary cement concrete. On the basis of the results of accelerated corrosion tests, corrosion resistance of the concrete mixed with granulated blast furnace slag shows good to corrosion resistance, however, the concrete with sulfate resisting cement shows bad to corrosion resistance.