• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.472-476
• /
• 2019

We have proposed a novel planar lightwave circuit (PLC) optical sensor to monitor the contamination in a flow-cell where water is continuously supplied through a water quality measurement system. We designed a PLC chip with a V-shape waveguide and the simulated its function as a sensor for monitoring contamination in a flow-cell using a numerical the FDTD (finite-difference time-domain) analysis. A novel cross type of waveguide was introduced to make the PLC chip of the V-shaped waveguide. The fabricated PLC was cut into the cross waveguide. A change in the optical propagation loss of the PLC sensor was observed after immersing the PLC sensor into city water. It was determined that the propagation loss of the PLC sensor was 3 dB at a wavelength of $1.55{\mu}m$ in the city water for 15 days.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.6
• /
• pp.247-257
• /
• 2021

This study was started to investigate why autoclave curing (AC) specimen showed an improvement in compressive strength after immersion in water for a long time, although AC specimen did not showed a high initial compressive strength unlike our expectations. Distilled water and alkaline solutions were used for immersion and three different curing methods were engaged. It was expected that the compressive strength would be improved after immersion in alkaline solutions; however, there was little difference in compressive strength after 21 day immersion because both new crystallites produced by additional geopolymerization and expansion caused by the alkaline aggregate reaction may prevent the additional improvement in compressive strength. It was concluded that in order to secure the long-term commonality and underwater stability of the geopolymers, it is desirable aging geopolymers while immersing it underwater for more than 21 days after curing using an autoclave.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.2
• /
• pp.68-76
• /
• 2022

This study was performed to investigate the mechanism of the change in compressive strength of autoclave cured geopolymers. Specimens were immerged in distilled water, 2M, 8M, and 14M alkaline solutions for 3, 7, and 21 days. The change in the specimens immersed in a short period of time was not significant, but the compressive strength of the specimens immersed in the distilled water and 8M alkali solution) for 21 days increased more than twice as much as before immersion because of additional geopolymerization. However, compressive strength decreased due to the alkaline aggregate reaction when alkaline solution was supplied more than a certain level of concentration. Therefore, immersing the specimens for more than 21 days in the distilled water or 8M alkaline solution would be desirable for the improvement of compressive strength of autoclave cured specimens.

• Journal of Korean Medical classics
• /
• v.24 no.2
• /
• pp.23-50
• /
• 2011

"LeiGongPaoZhiLun" is the first pharmaceutical book, and there are various opinion on when LeiXiao(雷斅), the author lived. From the aspect of several data, it is appropriate most that LeiXiao live in the period of Sui(隋) Dynasty, like SuSong(蘇頌) in the Sung Dynasty said, This book was not made at one time by one person. At the beginning, it was written by LeiXiao and the later generations enlarged to finish. The original of "LeiGongPaoZhiLun" disappeared already but a large amount of this book was quoted to "ZhengLeiBenCao(證類本草)" to be preserved. The contents of "LeiGongPaoZhiLun" are the first professional book about processing of medicinal, in which most of processing of medicinal that is generally used today, is included and some methods are unused. Besides, the regulations of this book are specific, the range is broad, and theoretical frame is established for the first time. This book has abundant contents, in which several processing of medicinal are written. There are 10 methods such as steaming(蒸法), boiling(煮法), baking(炮法), stir-frying(炒法), calcining(煅法), long time boiling(煉法), scorching(燒法), baking after wrapping(煨法), immersing(浸法), washing(洗法), flying(飛法), etc. How to remove some section that is not used for drug, how to separate according to medical use and region to be applied, how to smash, how to cut, how to dry, container for medicine, warning for making a prescription, time to make medicine and amount of medicine, how to distinguish superior and inferior and origin, how to make medicine partially, etc, are contained in this book. The contents of "LeiGongPaoZhiLun" can be mixture of processing of medicinal of medical scientists and taoists. In conclusion, however, the effect by the later medical generations of "LeiGongPaoZhiLun" was not great on processing of medicinal. It stemmed from the difference of processing of medicinal in this very taoistic book that realistic difficulties were disregarded by taoists for training and practical purpose, treatment that is the reason that later medical generations used processing of medicinal. Consequently, there is no great relation between the development of processing of medicinal in the Sung Dynasty and this book. "LeiGongYaoXingFu(雷公藥性賦)" that was abundant in medical market in Ming(明) and Qing(清) period has no relation with "LeiGongPaoZhiLun" is kind of a distribution-purposed book that was mnge in or after Ming Dynasty. However, since a book that is said to be written by 'LiGao(李杲)'PaoZhihis nof a dijust borrowed and focus on a brief summery, it is not desirable for beginners to learn medical knowledge. "LeiGongPaoZhiLun" is the first pharmaceutical book and is a model to show how a science in the history of the herb medicine generated and developed and how such a book is changed and modified to make a change of value.

• Analytical Science and Technology
• /
• v.21 no.2
• /
• pp.93-101
• /
• 2008

The application of solid phase microextraction (SPME) is generally conducted by directly immersing the fiber into the liquid sample or by exposing the fiber in the head space (HS). The extraction temperature, the time of incubation, and application of stirring are often designated to be the most important parameters for achieving the best extraction efficiencies of HS-SPME analysis. In this study, relative importance of these three analytical parameters involved in the HS-SPME method is evaluated using a polydimethylsiloxane/carboxen (PDMS/CAR) fiber. To optimize its operation conditions the competing relationships between different parameters were investigated by comparing the extraction efficiency based on the combination of three parameters and two contracting conditions: (1) heating the sample at 30 vs. 50 C, (2) exposing samples at two durations of 10 vs. 30 min, and (3) application of stirring vs. no stirring. According to our analysis among 8 combination types of HS-SPME method, an extraction condition termed as S50-30 condition ((1) 1200 rpm stirring, (2) $50^{\circ}C$ exposure temp, and (3) 30 min exposure duration) showed maximum recovery rate of 45.5~68.5% relative to an arbitrary reference of direct GC injection. According to this study, the employment of stirring is the most crucial factor to improve extraction efficiency in the application of HS-SPME.

• Smart Media Journal
• /
• v.4 no.4
• /
• pp.111-119
• /
• 2015

As a variety of HMD(Head Mounted Display) has come out, the production of 3D images onto which VR(Virtual Reality) technologies are grafted has been contributed to activating the production of image contents depending on a tangible or immersing type. VR-based image contents have enlarged their applicability across the entertainment industry from animation and game to realistic images. At the same time, the solution development for producing VR image contents has also gained elasticity. However, among those production solutions which have been used until now, fixed stereo camera based photographing has a limit that the binocular disparity of a user is fixed. This does not only restrict a way of expression a producer intends to direct, but also may cause the effect of 3D or space not to be sensed enough as view condition is not considered enough in a user's side. This study is aimed at resolving with skills applying in the latter part of 3D image production the problem that convergence points may be adjusted with restriction, which tends to happen at the time of the production of VR image contents. The later stage of the 3D imaging work analyzes and applies to game engines the significance of adjusting convergence points through the visualization of binocular disparity so that it is available to implement a function that the points could be controlled at random by a user.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.5
• /
• pp.499-509
• /
• 2018

This study optimized the bone-softening and fishy odor-reducing process for mackerel Scomber japonicus products using response surface methodology (RSM). The RSM showed that the optimum concentrations of doenjang and citric acid for reducing the fishy odor in bone-softened mackerel were 11.8% and 0.04%, respectively, and the optimum immersion time was 52.2 min. The estimated overall acceptance, salinity, and acidity of the products under these optimum conditions were 7.7 points, 1.1%, and 202.6 mg/100 g, respectively, which were similar to the actual measured values of $7.6{\pm}1.2$ points, $1.0{\pm}0.1%$ and $203.2{\pm}3.8mg/100g$. Moreover, the heating temperature and time for bone-softening based on RSM were $107.3^{\circ}C$ and 4.4 h, respectively. The estimated hardness and proportion of skin removed from the product under the optimal conditions were $161.5g/cm^2$ and 0.09%, respectively, which were also similar to the actual measured values of $171.1{\pm}12.6g/cm^2$ and $0.10{\pm}0.02%$. The optimum bone-softening and fishy odor-reducing process for mackerel consisted of the following steps: thawing (${\leq}10^{\circ}C$, 8 h), filleting, washing/dewatering, immersing in an 11.8% doenjang -0.04% citric acid solution for 52 min, washing/dewatering, heating ($107.3^{\circ}C$, 4.4 h), freezing, depanning, internal and external packaging, and X-ray detection treatment.

• Journal of Acupuncture Research
• /
• v.22 no.6
• /
• pp.27-36
• /
• 2005

Introduction : The aim of the study is to investigate the suppressive action of electroacupuncture on cold alloynia development in the rat model of neuopathic pain. Methods : To produce neuropathic pain, the right superior caudal trunk was resected $1{\sim}2\;mm$ between S1 and S2 spinal nerves. The rats were divided into control and four electroacupuncture groups: Two electroacupuncture groups were given 2 Hz or 100 Hz electroacupuncture for 20 minutes everyday after the sacral nerve injury. Other two electroacupuncture groups were given 2 Hz or 100 Hz electroacupuncture for 20 minutes just one session at one hour after the sacral nerve injury. The right point of Joksamni (ST36) was applied for electroacupuncture. The control group was induced neuropathic pain without electroacupuncture. The cold allodynia was assessed by immersing the tail in $4^{\circ}C$ water. The latency to an abrupt tail movement after rat tail immersion was measured with a cut-off time of 15 sec at 4th, 7th and 14th day after the sacral nerve injury. Results : The results were as follows; 1. At 4th experimental day, there were no significant differences between 2 Hz or 100 Hz electroacupuncture groups and the control group. 2. At 7th experimental day, everyday 2 Hz or 100 Hz electroacupuncture groups showed significant differences compared with the control group. But There were no significant differences between 2 Hz and 100 Hz electroacupuncture groups. 3. At 14th experimental day, everyday 2 Hz electroacupuncture group showed significant differences compared with the control group. But everyday 100 Hz electroacupuncture group showed no significant difference compared with the control group and everyday 2 Hz electroacupuncture group. 4. There were no significant differences between the control and 2 Hz or 100 Hz electroacupuncture groups which were done just one session at one hour after the surgery. 5. Everyday 2 Hz electroacupuncture group showed significant differences in the one session of the 100 Hz electroacupuncture group. Conclusion : Everyday 2 Hz electroacupuncture exerts a suppressive action on cold allodynia development in the rat model of neuropathic pain.

• Journal of Plant Biology
• /
• v.12 no.1
• /
• pp.22-30
• /
• 1969

To investigate the effects of internal radiation of various intensityon the test crop(flax), seeds of four levels of activity($15.5{\times}10-4 $\mu$c/grain, 9.0{\times}10-2$\mu$c/grain, 2.2{\times}100$\mu$c/grain and 3.8{\times}10-1$\mu$c/grain)$ which had been obtained by immersing them into various concentrations of P-32 original solution (total activity: 90 mc, To: 3/21) for 24 hours at room temperature, were germinated, transplanted later into pots, and the rate of germination and the successive growth were observed, and the inorganic conents of the plant top were analyzed. The results are as follows: 1. At the early stage of germination, the plants manifested themselves both inhibitory and promotive effects at higher and lower activity levels respectively, compared those of the control. These difference of growth on account of different levels of activity appeared, however, to be gradually narrowed in the course of time after germination, except at the highest activity. 2. Two weeks after transplanting, the plants of the lowest activity showed more vigorous growth than those of control. The plants belonging to the other activity levels on the other hand, tended to be less growing, the higher the activity. However, this growth gap between treatments seemed to be progressively closed one month after transplanting. 3. Most of the leaves and stems of the plants belonging to the highest activity level ($3.8{\times}101$\mu$c/grain$) were withered during the early stage of growth, and this damage did not recover. 4. Practically no difference of growth was observed among treatments(excluding that of highest activity) one and half months after transplanting. 5. The fluorescence tended to be mroe delayed than the control, as the activity decreased. 6. There was a tendency that the number of pods harvested were larger in the plants treated with P-32 than that of the control. 7. The proportion of fiber in the plants at harvest appeared to be larger at lower activity and smaller at higher P-32 concentration than that of control. 8. As for the inorganic contents of the plant top harvested the floowing tendency was observed: (1) Nitrogen content was highest at the highest activity level at which the poorest growth ensued. (2) There was no clear difference of phosphorus content among treatments. (3) The contents of potassium and magnesium were higher than control at the medium levels of activity. (4) Calcium content of all treated blocks was found to be more than that of control.

• Development and Reproduction
• /
• v.10 no.3
• /
• pp.197-202
• /
• 2006

Sex steroids are generally considered as natural sex inducers in fish, and aromatase (cytochrome P450 aromatase) that catalyzes androgens into estrogens in the steroidogenic pathway is also known to be involved in sex differentiation. The timing of aromatase action is, thus, of central importance in the study of fish sex differentiation. We treated sexually undifferentiated tilapia (Oreochromis niloticus) larvae with $Fadrozole^{TM}$, a non-steroidal aromatase inhibitor (AI), by immersing the fish in a solution containing AI during the sex differentiation period to narrow down the critical period of aromatase action. Fish were treated once at 11 or 13 days post fertilization (dpf), or twice at 11 and 13 dpf. The concentrations of AI at each time of the treatment were 0 mg/L (control), 50 mg/L or 100 mg/L. Survival rate was not statistically associated with AI immersion treatment (p>0.25). However, sex ratio was significantly altered by the treatment, with higher concentration and double immersion being more effective in masculinizing genetic females (p<0.05). These results suggest that aromatase action for sex differentiation in this fish species would begin at least from 11 dpf which is much earlier than previously expected, and that only 3 hours of brief immersion in AI solution is powerful enough to alter genetically programed sex.